Sarg package for pfsense

Donny · May 27, 2012, 11:20 AM

after last update...
squid logs are in /var/squid/logs/access.log' not "/var/log/squid/access.log""
how to fix???

system logs:
php: /pkg_edit.php: The command '/usr/local/bin/sarg ' returned exit code '1', the output was 'SARG: File not found: /var/log/squid/access.log'

me too the same error at system logs. The squid proxy also got error the line 1378 or 1387 (I am not sure which file name "Squid.conf" or "Squid.inf") after I made config at "General tab", when I click the save button.
SARG also no real time report at all.

marcelloc · May 28, 2012, 4:16 PM

Donny, did you tried to save config after package update?

the code has the correct folder but maybe the default config file of sarg 2.3.2 has /var/log/squid/access.log

$sarg_proxy=array(	'squid_rc'=>'/usr/local/etc/rc.d/squid.sh',
					'squid_config'=>'/var/squid/logs/access.log',
					'squidguard_config'=>'/usr/local/etc/squidGuard/squidGuard.conf',
					'squidguard_block_log'=>'/var/squidGuard/log/block.log',
					'dansguardian_config'=>'/usr/local/etc/dansguardian/dansguardian.conf',
					'dansguardian_log'=>'/var/log/dansguardian/access.log');

Donny · May 28, 2012, 6:49 PM

Donny, did you tried to save config after package update?

the code has the correct folder but maybe the default config file of sarg 2.3.2 has /var/log/squid/access.log

Hallo Marcelloc

First, I have clean install Squid3 and configured, then I click save and I got squid proxy error fatal the line 1378 or 1387 (I am not sure which number) on Chrome web browser and I also not sure which file name "Squid.conf" or "Squid_reverse.inf")
Second, I have clean install SARG last version and configured in General tab, User tab and Schedule tab, then save. When I click update button at Real time report, no real time report appear at all.
I also try to reboot pfsense many time after config Squid3 and SARG but the Real time report still not appear.
Anyway I will try to clean install pfSense and Squid3 and SARG again later.

Thank you
Donny

marcelloc · May 29, 2012, 3:56 AM

@Donny:

Anyway I will try to clean install pfSense and Squid3 and SARG again later.

Try sarg just after you get squid up and running.

I'll check this squid3 first run error as soon as possible.

att,
Marcello Coutinho

Donny · May 29, 2012, 8:22 AM

@marcelloc:

@Donny:

Anyway I will try to clean install pfSense and Squid3 and SARG again later.

Try sarg just after you get squid up and running.

I'll check this squid3 first run error as soon as possible.

att,
Marcello Coutinho

Hello Marcelloc

I will do and test it in this evening. I will make some screenshot also for some error.

Donny

Donny · May 29, 2012, 8:21 PM

Hello Marcelloc

I just clean install pfSense and basic configured. After that I have installed Squid3 last version.
In the Squid "general tab" I just only use some default setting. I enable "Enable logging and log rotate" and also changed the language to "en". So I click save.

I got fatal error on Chrome web browser like this:

"Fatal error: Cannot use string offset as an array in /usr/local/pkg/squid.inc on line 1378"

and at this point I enter Chrome web browser again I got: "Error: No packege defined".

then I enter pfSense Lan IP and went back to Squid general tab but not things save (Enable logging and log rotate and language "en"). I saw on dashboard that Squid is not running and then
I tried to configure squid on general tab again and the click save but at this time I don't get any fatal error.

I also checked at system log file and I saw some error like this:

php: /pkg_edit.php: The command '/usr/local/sbin/squid -k kill' returned exit code '1', the output was 'squid: ERROR: No running copy'

So you can see my screenshot.
I did not install SARG yet. Just only clean install pfsense and squid3

Thank u

Donny

![Squid fatal error.png](/public/imported_attachments/1/Squid fatal error.png)
![Squid fatal error.png_thumb](/public/imported_attachments/1/Squid fatal error.png_thumb)
![Squid Error No package defined.png](/public/imported_attachments/1/Squid Error No package defined.png)
![Squid Error No package defined.png_thumb](/public/imported_attachments/1/Squid Error No package defined.png_thumb)
![Squid syslog file.png](/public/imported_attachments/1/Squid syslog file.png)
![Squid syslog file.png_thumb](/public/imported_attachments/1/Squid syslog file.png_thumb)

marcelloc · May 29, 2012, 9:13 PM

Donny,

I've pushed a fix to this issue with no version change, on my tests it's working fine now.

wait 15 minutes, reinstall the package and try to configure it again.

att,
Marcello Coutinho

Donny · May 29, 2012, 9:24 PM

@marcelloc:

Donny,

I've pushed a fix to this issue with no version change, on my tests it's working fine now.

wait 15 minutes, reinstall the package and try to configure it again.

att,
Marcello Coutinho

Ok, I will try after 30 minutes.

Donny · May 29, 2012, 10:52 PM

I just clean install pfSense and basic configured. After that I have installed Squid3 last version. 
In the Squid "general tab" I just only use some default setting. I enable "Enable logging and log rotate" and also changed the language to "en". So I click save.

I got fatal error on Chrome web browser like this:

"Fatal error: Cannot use string offset as an array in /usr/local/pkg/squid.inc on line 1378"

and at this point I enter Chrome web browser again I got: "Error: No packege defined".

then I enter pfSense Lan IP and went back to Squid general tab but not things save (Enable logging and log rotate and language "en"). I saw on dashboard that Squid is not running  and then 
I tried to configure squid on general tab again and the click save but at this time I don't get any fatal error.

I also checked at system log file and I saw some error like this:

php: /pkg_edit.php: The command '/usr/local/sbin/squid -k kill' returned exit code '1', the output was 'squid: ERROR: No running copy'

So you can see my screenshot.
I did not install SARG yet. Just only clean install pfsense and squid3

Hello Marcello,

I just tried it and I got the same fatal error and the same result that I explain before.

This is second time to clean install pfSense and Squid. I did not try to reinstall squid package because I want to be sure that squid work without error.

Now in Holland is almost 1 AM in the morning, I am going to bed now.

Donny

marcelloc · May 30, 2012, 4:46 AM

I'll try to reproduce this error.

Try to refresh the page with f5 and save again.

klamath · May 30, 2012, 11:41 PM

Hi marcelloc

looks like sarg can't handle large entries on file /var/squidGuard/log/block.log

I don't want erase the file /var/squidGuard/log/block.log, could u help me?

php: /pkg_edit.php: The command '/usr/local/bin/sarg ' returned exit code '1', the output was 'SARG: Records in file: 27976, reading: 0.00%^MSARG: Records in file: 5000, reading: 17.87%^MSARG: Records in file: 10000, reading: 35.74%^MSARG: Records in file: 15000, reading: 53.62%^MSARG: Records in file: 20000, reading: 71.49%^MSARG: Records in file: 25000, reading: 89.36%^MSARG: Hour string too long in redirector log file /var/squidGuard/log/block.log SARG: Records in file: 27976, reading: 100.00%'

marcelloc · May 31, 2012, 3:00 AM

@klamath:

looks like sarg can't handle large entries on file /var/squidGuard/log/block.log
I don't want erase the file /var/squidGuard/log/block.log, could u help me?

try to split this log or use sarg args to limit log search.

@klamath:

Hour string too long in redirector log file /var/squidGuard/log/block.log SARG: Records in file: 27976, reading: 100.00%'

I understand this error as some format error on log file/line not a too many records errors.

klamath · Jun 1, 2012, 10:57 PM

Thanks!

I've set the User_report_limit to 300 and rotate squidguard block log…

It's work for a while... than stopped sudenly again!

php: /pkg_edit.php: The command '/usr/local/bin/sarg ' returned exit code '1', the output was 'SARG: Records in file: 86169, reading: 0.00%^MSARG: Records in file: 5000, reading: 5.80%^MSARG: Records in file: 10000, reading: 11.61%^MSARG: Records in file: 15000, reading: 17.41%^MSARG: Records in file: 20000, reading: 23.21%^MSARG: Records in file: 25000, reading: 29.01%^MSARG: Records in file: 30000, reading: 34.82%^MSARG: Records in file: 35000, reading: 40.62%^MSARG: Records in file: 40000, reading: 46.42%^MSARG: Records in file: 45000, reading: 52.22%^MSARG: Records in file: 50000, reading: 58.03%^MSARG: Records in file: 55000, reading: 63.83%^MSARG: Records in file: 60000, reading: 69.63%^MSARG: Records in file: 65000, reading: 75.43%^MSARG: Records in file: 70000, reading: 81.24%^MSARG: Records in file: 75000, reading: 87.04%^MSARG: Records in file: 80000, reading: 92.84%^MSARG: Records in file: 85000, reading: 98.64%^MSARG: Successful report generated on /usr/local/sarg-reports/29May2

expert_az · Jun 12, 2012, 6:01 AM

i did conf like you,http://forum.pfsense.org/index.php/topic,47765.165.html
its ok now ,thank you for great job

hello marcelloc,i got this error while testing sarg with squid and squidguard,and can't see reports on view report tab

Error: Could not find report index file.
Check and save sarg settings and try to force sarg schedule.

php: : The command '/usr/local/bin/sarg ' returned exit code '1', the output was 'SARG: Records in file: 72216, reading: 0.00%^MSARG: Records in file: 5000, reading: 6.92%^MSARG: Records in file: 10000, reading: 13.85%^MSARG: Records in file: 15000, reading: 20.77%^MSARG: Records in file: 20000, reading: 27.69%^MSARG: Records in file: 25000, reading: 34.62%^MSARG: Records in file: 30000, reading: 41.54%^MSARG: Records in file: 35000, reading: 48.47%^MSARG: Records in file: 40000, reading: 55.39%^MSARG: Records in file: 45000, reading: 62.31%^MSARG: Records in file: 50000, reading: 69.24%^MSARG: Records in file: 55000, reading: 76.16%^MSARG: Records in file: 60000, reading: 83.08%^MSARG: Records in file: 65000, reading: 90.01%^MSARG: Records in file: 70000, reading: 96.93%^MSARG: Cannot delete /usr/local/sarg-reports/2012/06/12/debakim.html - No such file or directory SARG: Records in file: 72216, reading: 100.00%'

Fesoj · Jul 26, 2012, 9:24 PM

Is Sarg currently broken?

I am running Sarg on Squid2 logs, kept the default Report Options, selected all entries in Report to generate, and set up an hourly schedule.

After forcing the update, the View Report gives me:

Error: Could not find report index file.
Check and save sarg settings and try to force sarg schedule.

{$dir}/{$url} in sarg_frame-php contains /usr/local/sarg-reports/index.html, which does not exist, but report files have been generated under /usr/local/sarg-reports/2012/07/26 which mirrors today's date.

Any suggestions what to do?

marcelloc · Jul 26, 2012, 9:31 PM

@Fesoj:

Is Sarg currently broken?

No, I have 6 working with latest version

@Fesoj:

{$dir}/{$url} in sarg_frame-php contains /usr/local/sarg-reports/index.html, which does not exist, but report files have been generated under /usr/local/sarg-reports/2012/07/26 which mirrors today's date.

Any suggestions what to do?

Did you selected "Generate the main index.html" option on gui?

I've attached a screenshot with my current setup.

Fesoj · Jul 26, 2012, 9:37 PM

Did you selected "Generate the main index.html" option on gui?

No, I didn't. Now that I did it, it is working.

Thanx.

AudiAddict · Jul 30, 2012, 1:52 PM

Can somebody explain if I need to set up log rotation in the schedule or not? And how this works?

I have it set to default ( do nothing) in SAR and have my squid settings set to 186 days log rotation (aprox 6 months).

Do I need to use the log rotation of SARG as wel? What does it do exactly? Clean up my old logs?

marcelloc · Jul 30, 2012, 3:22 PM

@AudiAddict:

Do I need to use the log rotation of SARG as wel?

No, just one log rotate is fine.

@AudiAddict:

What does it do exactly? Clean up my old logs?

Rotate logs and keep last 10 rotated files.(access.log.0 access.log.1 access.log.2…)

att,
Marcello Coutinho

AudiAddict · Jul 30, 2012, 4:01 PM

Thanks for your reply.

Does it mean that it reads through the whole file everytime? So If I have it set to rotate in squid settings every 6 months will this cause it to be slow at generating the report?