Best vlan switch for pfsense

Cry Havok

As wallabybob said, the base GS108 doesn't have VLAN capability. However the GS108T does (hence his comment about needing the correct suffix).

star_tiger5

Thanks for information.
Also tell me , what is your view about netgear GS108T-200.
Is this Switch is VLAN capable for pfsense????

SeventhSon

@star_tiger5:

netgear GS108T-200.
Is this Switch is VLAN capable for pfsense?

The GS108Tv2 (GS108T-200) would work, as well as the RB250GS. I like the Netgear because of the metal housing and the warranty.

stephenw10

I believe the GS108E (and the GS105E) are vlan capable if you need a cheaper option.

Steve

SeventhSon

@stephenw10:

I believe the GS108E (and the GS105E) are vlan capable if you need a cheaper option.

Steve

And you only get a Windows configuration utility to configure those VLANs

stephenw10

Really? Thanks for the heads up. ::)

Steve

biggsy

I have both the Netgear GS108Tv2 and the HP 1810G-8. which I think is still current.

Not much to separate them really. Both work well as VLAN-capable switches.

Both have useless NTP clients. The Netgear polls the NTP server every minute until it gets a Kiss-of Death reply and the HP NTP client just doesn't work properly. Not much good if you want to log anything from them.

holmsn

The GS105E switch as well as only having the Windows configuration program " Pro Safe Plus Utility"will only let you change ip address etc if it's in the same subnet as the managing machine i.e it will still "discover" it , using Layer 2 presumably but you have to change the subnet of the manager to do anything.
The GS108Tv2 has a Windows config " Smart control center" which allows ip address changes on the switch irrespective of the managing pc ip AS WELL as the Web interface - much more useful

stephenw10

£48 (gs105e) vs £63 (gs108t). I guess it depends just how often you need to reconfigure your switch ;) As well as how many ports you need and the additional features of the 108T etc. Seems like the extra money is worth it to me.

Steve

star_tiger5

Two day ago, I buy netgear gs108t for increasing wan ports.
Now an other problem has came and that is i don't to how to configure it. Now for more learning I am requesting to you to send me conf file(backup file) of your netgear gs108t
It will help me by giving me some ideas about netgear gs108t configuration.
Please Help ME….

SeventhSon

on pfSense add VLANsvia Interfaces: VLAN

on the switch:
add all the same VLANs
make sure the port that goes to pfSense has a T (for tagged) for all those VLANs
then on each other port, have a U (for untagged) for one VLAN and set the PVID to the same