Ipguard package
-
i installed ipguard on pfsense 2.01 32bit, when i click on the start button in the Services menu it just doesnt start. There is a message saying it started but in the menu it keeps being stopped. Is there a way to start it manually (command line) or see the logs for when a service start?
-
Check your config first and save settings. Then go to console and check if its running with "PS ax "
-
nope not running
EDIT:I accessed pfsense in ssh and when I try to launch ip guard it says this:
/libexec/ld-elf.so.1: Shared object "libpcap.so.1" not found, required by "ipguard"
-
what version of pfsense are you running?
-
2.0.1-RELEASE (i386)
i fixed this issue by installing snort, which installed the missing dependencies but now i've got another problem
in /var/log/ipguard_fxp0.log i get:
error pcap_open_live(): fxp0: No such device exists (BIOCSETIF failed: Device not configured) -
I've tested this package without snort without issues, I'll try it again on virtual lab.
-
Hey there guys,
Here's the problem I'm running into and I'm hoping ipguard can turn the trick….
I have a wifi client who for whatever reason is always trying to set a static IP that conflicts with an ip address in my static range, which causes temporary problems from time to time.
I'd like to make sure that these addresses are not in conflict in situations like this. Since my static devices are all known and well documented, would the correct approach be to enter them all in ipguard, thereby (hopefully, I think?) ensuring that no other mac address can inadvertently obtain access to my LAN (wifi) using a reserved, static ip?
???
-
Sure, ipguard can help.
Did you tried static mapping on pfSense dhcp+ Deny unknown clients?
-
Surge, ipguard can help.
Did you tried static mapping on pfSense dhcp+ Deny unknown clients?
No, and here's why: I run a WISP and I don't want to deny unknown clients. They can sign up online thru the captive portal and that's $$ ;D
However, I did try mapping it to an IP address, but pfSense tells me that I can't do that inside of the dynamic IP range….. which seems silly, actually.
-
Dear marcelloc,
i did download the ipguard last week and installed it on my pfsense 2.0.1 (amd64)
however, the services didnt run even i tried to start it manually
then a few days later i remove it back because i thought there was an error while it was installed
somehow, i cant find it again from the "packages" list, did you remove it?
how can i use this good features? im ran a wisp as well and i hope that i dont need to deny unknown clients ;)
waiting for your kind replythanks
cleancodex -
cleancodex,
check on installed packages tab, I did not removed the service.
There is a depedencie that is not included on this package yet.
you need to install libcap first. You can do this using pkg_add from freebsd repo or installing snort package before ipguard.
I'll try to fix it as soon as possible.
-
hello all,
there is prblm wth pfsense , installed ipguard-dev but in services status it shows not started , i go to firewall select ipguard, check to enable this rule , create a rule but still nothing happens … wht shuld i do next ??? -
same prblm faced
-
is this package done with dependencies?
-
-
is this package done with dependencies?
not yet. still need manual fix.
thanks, what are the dependencies needed for this package? i'm gonna test this and install manually all the dependencies first…
-
thanks, what are the dependencies needed for this package? i'm gonna test this and install manually all the dependencies first…
try just lippcap if it works, I'll push a fix to install process on 2.0.x.
amd64
http://files.pfsense.org/packages/amd64/8/All/libpcap-1.3.0.tbzi386
http://files.pfsense.org/packages/8/All/libpcap-1.3.0.tbz -
thanks! will test later and post results…
-
very Thx For who made this package alive :) AND THX FOR PFSENSE ITS FREEEEEEEEEEEE :) AND VERY HELPFUL :)
-
about the libipcap: its there on 2.0.x: /lib/libpcap.so.7
I have linked /lib/libpcap.so.7 to /lib/libpcap.so.1 and the binary from the v0.1 package is happy.
so, you can either create the link when you install the package or compile the bin to use /lib/libpcap.so.7there are some issues with the webgui: sorting (moving things up or down) is not permanent and there are empty entries shown for previously deleted mac/ip address sets.
otherwise, nice package! I hope it's still being worked on. :)
