Ipguard package

nujiel

nope not running

EDIT:I accessed pfsense in ssh and when I try to launch ip guard it says this:

/libexec/ld-elf.so.1: Shared object "libpcap.so.1" not found, required by "ipguard"

marcelloc

what version of pfsense are you running?

nujiel

2.0.1-RELEASE (i386)
i fixed this issue by installing snort, which installed the missing dependencies but now i've got another problem
in /var/log/ipguard_fxp0.log i get:
error pcap_open_live(): fxp0: No such device exists (BIOCSETIF failed: Device not configured)

marcelloc

I've tested this package without snort without issues, I'll try it again on virtual lab.

islandwifibill

Hey there guys,

Here's the problem I'm running into and I'm hoping ipguard can turn the trick….

I have a wifi client who for whatever reason is always trying to set a static IP that conflicts with an ip address in my static range, which causes temporary problems from time to time.

I'd like to make sure that these addresses are not in conflict in situations like this. Since my static devices are all known and well documented, would the correct approach be to enter them all in ipguard, thereby (hopefully, I think?) ensuring that no other mac address can inadvertently obtain access to my LAN (wifi) using a reserved, static ip?

???

marcelloc

Sure, ipguard can help.

Did you tried static mapping on pfSense dhcp+ Deny unknown clients?

islandwifibill

@marcelloc:

Surge, ipguard can help.

Did you tried static mapping on pfSense dhcp+ Deny unknown clients?

No, and here's why: I run a WISP and I don't want to deny unknown clients. They can sign up online thru the captive portal and that's $$ ;D

However, I did try mapping it to an IP address, but pfSense tells me that I can't do that inside of the dynamic IP range….. which seems silly, actually.

cleancodex

Dear marcelloc,

i did download the ipguard last week and installed it on my pfsense 2.0.1 (amd64)
however, the services didnt run even i tried to start it manually
then a few days later i remove it back because i thought there was an error while it was installed
somehow, i cant find it again from the "packages" list, did you remove it?
how can i use this good features? im ran a wisp as well and i hope that i dont need to deny unknown clients ;)
waiting for your kind reply

thanks
cleancodex

marcelloc

cleancodex,

check on installed packages tab, I did not removed the service.

There is a depedencie that is not included on this package yet.

you need to install libcap first. You can do this using pkg_add from freebsd repo or installing snort package before ipguard.

I'll try to fix it as soon as possible.

tanvir

hello all,
there is prblm wth pfsense , installed ipguard-dev but in services status it shows not started , i go to firewall select ipguard, check to enable this rule , create a rule but still nothing happens … wht shuld i do next ???

tanvir

same prblm faced

z3r0tech

is this package done with dependencies?

marcelloc

@z3r0tech:

is this package done with dependencies?

not yet. still need manual fix.

z3r0tech

@marcelloc:

@z3r0tech:

is this package done with dependencies?

not yet. still need manual fix.

thanks, what are the dependencies needed for this package? i'm gonna test this and install manually all the dependencies first…

marcelloc

@z3r0tech:

thanks, what are the dependencies needed for this package? i'm gonna test this and install manually all the dependencies first…

try just lippcap if it works, I'll push a fix to install process on 2.0.x.

amd64
http://files.pfsense.org/packages/amd64/8/All/libpcap-1.3.0.tbz

i386
http://files.pfsense.org/packages/8/All/libpcap-1.3.0.tbz

z3r0tech

thanks! will test later and post results…

sand_hero

very Thx For who made this package alive :) AND THX FOR PFSENSE ITS FREEEEEEEEEEEE :) AND VERY HELPFUL :)

senser

about the libipcap: its there on 2.0.x: /lib/libpcap.so.7
I have linked /lib/libpcap.so.7 to /lib/libpcap.so.1 and the binary from the v0.1 package is happy.
so, you can either create the link when you install the package or compile the bin to use /lib/libpcap.so.7

there are some issues with the webgui: sorting (moving things up or down) is not permanent and there are empty entries shown for previously deleted mac/ip address sets.
otherwise, nice package! I hope it's still being worked on. :)

senser

two more things I would like to suggest:

drop root privileges (add '-s nobody' to the startup parameters).
don't use '-u 300', instead send SIGHUP to the process to reload the config when the user clicks save.

marcelloc

I'll take a look on it as soon as time permits.

Ipguard package

We use the mighty pf, we cannot be fooled.

We use the mighty pf, we cannot be fooled.