Bridge LAN + WLAN not working in last snapshot

eri--

Can you send me you config section of <interfaces></interfaces>and

so i can replicate locally?

xbipin

actually when i upgraded and then logged into the web gui it said there was a crash report and press yes to submit to developer so i did that, in the report there was some error related to php and timezone setting

eri--

Can you paste those errors here.

MaxPF

This is from a backup that used to work:


 <interfaces><wan><enable><if>vr1</if>
			<ipaddr>dhcp</ipaddr>
			 <gateway><blockpriv>on</blockpriv>
			<blockbogons>on</blockbogons>
			 <media><mediaopt></mediaopt></media></gateway></enable></wan> 
		 <lan><enable><if>bridge0</if>

			<ipaddr>192.168.1.1</ipaddr>
			<subnet>24</subnet>
			 <spoofmac></spoofmac></enable></lan> 
		 <opt1><if>vr2</if>

			 <spoofmac><enable><ipaddr>10.10.10.1</ipaddr>
			<subnet>24</subnet></enable></spoofmac></opt1> 
		 <opt2><if>vr0</if>
			 <enable><spoofmac></spoofmac></enable></opt2> 
		 <opt3><if>run0</if>
			 <wireless><standard>11g</standard>
				<mode>hostap</mode>
				<protmode>off</protmode>
				<ssid>LHC</ssid>
				<channel>0</channel>
				 <authmode><txpower>99</txpower>
				 <distance><regdomain><regcountry><reglocation><wpa><macaddr_acl><auth_algs>1</auth_algs>
					<wpa_mode>2</wpa_mode>
					<wpa_key_mgmt>WPA-PSK</wpa_key_mgmt>
					<wpa_pairwise>CCMP</wpa_pairwise>
					<wpa_group_rekey>120</wpa_group_rekey>
					<wpa_gmk_rekey>3600</wpa_gmk_rekey>
					<passphrase></passphrase>
					 <ext_wpa_sw><ieee8021x><enable></enable></ieee8021x></ext_wpa_sw></macaddr_acl></wpa> 
				 <auth_server_addr><auth_server_port><auth_server_shared_secret><wme><pureg><enable></enable></pureg> 
				 <auth_server_addr2><auth_server_port2><auth_server_shared_secret2></auth_server_shared_secret2></auth_server_port2></auth_server_addr2></wme></auth_server_shared_secret></auth_server_port></auth_server_addr></reglocation></regcountry></regdomain></distance></authmode></wireless> 
			 <enable><spoofmac></spoofmac></enable></opt3></interfaces>


	 <bridges><bridged><members>opt2,opt3</members>

			 <maxaddr><timeout><maxage><fwdelay><hellotime><priority><proto>rstp</proto>
			 <holdcount><ifpriority><ifpathcost><bridgeif>bridge0</bridgeif></ifpathcost></ifpriority></holdcount></priority></hellotime></fwdelay></maxage></timeout></maxaddr></bridged></bridges>

xbipin

@ermal:

Can you paste those errors here.

i simply submitted that and then it deleted the crash report after which i reverted to the previous working snapshot. u would be having access to the place where this crash report got submitted i guess

MaxPF

Just tried the Jan 24 07:37:42 build, but same thing is happening. I found a workaround that maybe can help troubleshoot this issue.

After restoring my backup and rebooting I have this setup for the interface:

WAN (wan) -> vr1 -> v4/DHCP4: XX.XX.XX.161/23
BRIDGE (lan) -> bridge0 -> v4: 192.168.1.1/24
GUEST (opt1) -> vr2 -> v4: 10.10.10.1/24
LAN (opt2) -> vr0 ->
WLAN (opt3) -> run0_wlan0 ->

with OPT2 and OPT3 bridged in bridge0 and nothing is working. However if in the serial console I choose option #2 and assign an IP address to LAN (opt2) like this:

WAN (wan) -> vr1 -> v4/DHCP4: XX.XX.XX.161/23
BRIDGE (lan) -> bridge0 -> v4: 192.168.1.1/24
GUEST (opt1) -> vr2 -> v4: 10.10.10.1/24
LAN (opt2) -> vr0 -> v4: 192.168.1.2/24
WLAN (opt3) -> run0_wlan0 ->

then everything starts working again!

UPDATE:
Not sure what happened overnight, but this morning it didn't work again (it was fine yesterday evening after the workaround) so I had to do another factory reset.

t3h0th3r

+1

zetar

Hello
I too have the same problem.
Until the version built on Tue Jan 22 17:56:08 EST 2013
Everything works fine, no longer works after the bridge.
My setup only bridge Wan-Lan Ip Wan With the gateway.
Use public IP, I do not need it use the NAT only firewall packet filtering, it will not work the Traffic Shaper.
Thank you.

eri--

Please try the next snapshot coming out.

zetar

I tried that today, but it's still not try the next one.

MaxPF

Just tried build Jan 25 11:42:18 and it is still the same with bridged interfaces not working at all.

xbipin

still doesnt work but i guess its something to do with dhcp and the bridge as my wireless devices remain on obtaining ip address but never gets one

zetar

I use manual IP addresses but should not be the same, I have changed something.

MaxPF

@xbipin:

still doesnt work but i guess its something to do with dhcp and the bridge as my wireless devices remain on obtaining ip address but never gets one

No it's not just dhcp that breaks. Even with static ip's nothing works with bridges interfaces.

eri--

I think i found the issues.
Please try tomorrows snapshot.

MaxPF

Great! I will and report back.
Is this the fix https://github.com/bsdperimeter/pfsense/commit/19defb88d4c7ff7e097b32702dee6e9b948e46b6?

xbipin

no luck for me as yet, i guess there were few more patches so will try the snap after that

xbipin

27th snap solved it

MaxPF

I can also confirm that Jan 27 build fixed the problem. Well done!

eri--

Thank you for testing.
Strange this was not hit before!