Aes-ni not working?

jimp

Is aesni.ko loaded during those tests? (check the output of kldstat)

I would expect to see at least AES-128-CBC in the cryptodev list if it attached, but then again, some others have reported that OpenSSL 1.0.1 did use AES-NI but didn't ever report it as being present, so it may take some more speed tests to tell for sure…

miloman

i entered the commands in the shell of a fresh image i just bootet up. i haven't configured/enabled anything at all.

if i enter the command "kldload aesni" i get this output:
padlock0: No ACE support
aesni0: AES-CBC,AES-XTS on motherboard

jimp

Does that openssl engine output change after having run the kldload?

miloman

yes…

/usr/bin/openssl engine -t -c
(cryptodev) BSD cryptodev engine
[RSA, RSA, DH, [b]AES-128-CBC]
[available]
(padlock) VIA PadLock (no-RNG, no-ACE)
[unavailable]
(dynamic) Dynamic engine loading support
[unavailable]

/usr/local/bin/openssl engine -t -c
(cryptodev) BSD cryptodev engine
[RSA, RSA, DH,[b] AES-128-CBC, AES-192-CBC, AES-256-CBC]
[available]
(rdrand) Intel RDRAND engine
[RAND]
[available]
(dynamic) Dynamic engine loading support
[unavailable]
(padlock) VIA PadLock: not supported
[unavailable]

jimp

ok, great.

One more thing if you have some time:

1. Reboot so aes-ni is not loaded.
2. Run the following in order:

Test speed before

/usr/bin/openssl speed -evp aes-128-cbc -elapsed
/usr/local/bin/openssl speed -evp aes-128-cbc -elapsed

Load AES-NI

kldload aesni

Test OpenSSL with default engine

/usr/bin/openssl speed -evp aes-128-cbc -elapsed
/usr/local/bin/openssl speed -evp aes-128-cbc -elapsed

Test OpenSSL with cryptodev engine

/usr/bin/openssl speed -evp aes-128-cbc -elapsed -engine cryptodev
/usr/local/bin/openssl speed -evp aes-128-cbc -elapsed -engine cryptodev

miloman

heres your wall of text. :)

[2.1-BETA1][admin@pfSense.localdomain]/root(1): /usr/bin/openssl speed -evp aes-128-cbc -elapsed
You have chosen to measure elapsed time instead of user CPU time.
To get the most accurate results, try to run this
program when this computer is idle.
Doing aes-128-cbc for 3s on 16 size blocks: 18546805 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 64 size blocks: 5035121 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 256 size blocks: 1289095 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 1024 size blocks: 325137 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 8192 size blocks: 40722 aes-128-cbc's in 3.00s
OpenSSL 0.9.8q 2 Dec 2010
built on: date not available
options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx)
compiler: cc
available timing options: USE_TOD HZ=128 [sysconf value]
timing function used: gettimeofday
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
aes-128-cbc 98891.21k 107382.09k 109967.84k 110944.78k 111161.64k

[2.1-BETA1][admin@pfSense.localdomain]/root(2): /usr/local/bin/openssl speed -evp aes-128-cbc -elapsed
You have chosen to measure elapsed time instead of user CPU time.
Doing aes-128-cbc for 3s on 16 size blocks: 108688414 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 64 size blocks: 28926457 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 256 size blocks: 7348512 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 1024 size blocks: 1844550 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 8192 size blocks: 230842 aes-128-cbc's in 3.00s
OpenSSL 1.0.1c 10 May 2012
built on: Sun Jan 27 13:05:44 EST 2013
options:bn(64,32) md2(int) rc4(8x,mmx) des(ptr,risc1,16,long) aes(partial) idea(int) blowfish(idx)
compiler: cc -fPIC -DOPENSSL_PIC -DZLIB_SHARED -DZLIB -DOPENSSL_THREADS -pthread -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,–noexecstack -DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -Wall -O2 -pipe -fno-strict-aliasing -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DVPAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
aes-128-cbc 579671.54k 617097.75k 627073.02k 629606.40k 630352.55k

[2.1-BETA1][admin@pfSense.localdomain]/root(3): kldload aesni

[2.1-BETA1][admin@pfSense.localdomain]/root(4): /usr/bin/openssl speed -evp aes-128-cbc -elapsed
You have chosen to measure elapsed time instead of user CPU time.
To get the most accurate results, try to run this
program when this computer is idle.
Doing aes-128-cbc for 3s on 16 size blocks: 2725774 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 64 size blocks: 2507908 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 256 size blocks: 1925032 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 1024 size blocks: 1029235 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 8192 size blocks: 147766 aes-128-cbc's in 3.00s
OpenSSL 0.9.8q 2 Dec 2010
built on: date not available
options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx)
compiler: cc
available timing options: USE_TOD HZ=128 [sysconf value]
timing function used: gettimeofday
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
aes-128-cbc 14535.69k 53485.26k 164217.56k 351201.58k 403372.36k

[2.1-BETA1][admin@pfSense.localdomain]/root(5): /usr/local/bin/openssl speed -evp aes-128-cbc -elapsed
You have chosen to measure elapsed time instead of user CPU time.
Doing aes-128-cbc for 3s on 16 size blocks: 2719290 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 64 size blocks: 2505062 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 256 size blocks: 1919653 aes-128-cbc's in 3.01s
Doing aes-128-cbc for 3s on 1024 size blocks: 1028277 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 8192 size blocks: 147809 aes-128-cbc's in 3.00s
OpenSSL 1.0.1c 10 May 2012
built on: Sun Jan 27 13:05:44 EST 2013
options:bn(64,32) md2(int) rc4(8x,mmx) des(ptr,risc1,16,long) aes(partial) idea(int) blowfish(idx)
compiler: cc -fPIC -DOPENSSL_PIC -DZLIB_SHARED -DZLIB -DOPENSSL_THREADS -pthread -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,–noexecstack -DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -Wall -O2 -pipe -fno-strict-aliasing -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DVPAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
aes-128-cbc 14502.88k 53441.32k 163384.91k 350985.22k 403617.11k

[2.1-BETA1][admin@pfSense.localdomain]/root(6): /usr/bin/openssl speed -evp aes-128-cbc -elapsed -engine cryptodev
engine "cryptodev" set.
You have chosen to measure elapsed time instead of user CPU time.
To get the most accurate results, try to run this
program when this computer is idle.
Doing aes-128-cbc for 3s on 16 size blocks: 2721627 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 64 size blocks: 2516799 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 256 size blocks: 1926157 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 1024 size blocks: 1029088 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 8192 size blocks: 147941 aes-128-cbc's in 3.00s
OpenSSL 0.9.8q 2 Dec 2010
built on: date not available
options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx)
compiler: cc
available timing options: USE_TOD HZ=128 [sysconf value]
timing function used: gettimeofday
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
aes-128-cbc 14514.45k 53674.88k 164313.53k 351151.19k 403847.11k

[2.1-BETA1][admin@pfSense.localdomain]/root(7): /usr/local/bin/openssl speed -evp aes-128-cbc -elapsed -engine cryptodev
engine "cryptodev" set.
You have chosen to measure elapsed time instead of user CPU time.
Doing aes-128-cbc for 3s on 16 size blocks: 2733266 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 64 size blocks: 2512115 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 256 size blocks: 1928735 aes-128-cbc's in 3.01s
Doing aes-128-cbc for 3s on 1024 size blocks: 1031083 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 8192 size blocks: 147874 aes-128-cbc's in 3.00s
OpenSSL 1.0.1c 10 May 2012
built on: Sun Jan 27 13:05:44 EST 2013
options:bn(64,32) md2(int) rc4(8x,mmx) des(ptr,risc1,16,long) aes(partial) idea(int) blowfish(idx)
compiler: cc -fPIC -DOPENSSL_PIC -DZLIB_SHARED -DZLIB -DOPENSSL_THREADS -pthread -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,–noexecstack -DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -Wall -O2 -pipe -fno-strict-aliasing -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DVPAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
aes-128-cbc 14577.42k 53591.79k 164157.89k 351943.00k 403794.60k

jimp

@miloman:

heres your wall of text. :)

Thanks :-)

Summarizing a little…
@miloman:

OpenSSL 0.9.8q, aesni.ko UNloaded:
aes-128-cbc 98891.21k 107382.09k 109967.84k 110944.78k 111161.64k

OpenSSL 1.0.1c, aesni.ko UNloaded:
aes-128-cbc 579671.54k 617097.75k 627073.02k 629606.40k 630352.55k

OpenSSL 0.9.8q, aesni.ko loaded:
aes-128-cbc 14535.69k 53485.26k 164217.56k 351201.58k 403372.36k

OpenSSL 1.0.1c, aesni.ko loaded:
aes-128-cbc 14502.88k 53441.32k 163384.91k 350985.22k 403617.11k

OpenSSL 0.9.8q, aesni.ko loaded, cryptodev engine:
aes-128-cbc 14514.45k 53674.88k 164313.53k 351151.19k 403847.11k

OpenSSL 1.0.1c, aesni.ko loaded, cryptodev engine
aes-128-cbc 14577.42k 53591.79k 164157.89k 351943.00k 403794.60k

It looks like loading aesni.ko does make it get used, since there is a substantial difference between the base system aesni before and after it is loaded.
Oddly, OpenSSL 1.0.1c without aesni.ko loaded is even faster. I'm not sure if that's somehow linked to OpenSSL's internal aesni support that may be getting dragged down by cryptodev or what.

If you repeat that test (just the first two commands), are the results the same each time?

Once aesni.ko is loaded it doesn't seem to matter which version of openssl is used or the engine used, too, suggesting at least the speed command is autoselecting the engine based on the cipher being used. (I confirmed this is also the case on ALIX with glxsb). So the last two commands can be ignored apparently.

miloman

If you repeat that test (just the first two commands), are the results the same each time?

yes… i ran the commands a couple of times to see if the speed/results were consistent.

let me know if you need me to test anything else. :)

jimp

It may be helpful if others with capable hardware could run the same test, I started a spreadsheet here:
https://docs.google.com/spreadsheet/ccc?key=0AojFUXcbH0ROdE15eHB4dndHTXZYcU1mQm9Dc3V2elE

The only other thing to try is a similar test but with actual VPN traffic (e.g. OpenVPN using AES-128-CBC) to see if (a) throughput is improved and/or (b) cpu usage reduced under load.

jimp

Thought of one more thing:

cryptotest -va aes128

bardelot

Just out of curiosity, I wonder how big the difference is when you do not use EVP (e.g. without -evp). Or is AES-NI only used when using EVP anyway?

ggzengel

Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz

(cryptodev) BSD cryptodev engine
[RSA, DSA, DH, AES-128-CBC, AES-192-CBC, AES-256-CBC]
[ available ]
(rsax) RSAX engine support
[RSA]
[ available ]

cryptotest -a aes 100000 100000
23.461 sec, 200000 aes crypts, 100000 bytes, 852493443 byte/sec, 6504.0 Mb/sec

/usr/local/bin/openssl speed -evp aes-128-cbc -engine cryptodev -multi 4
OpenSSL 1.0.1c 10 May 2012
evp 33879.67k 137175.74k 474658.63k 1254087.68k 1675531.61k

/usr/local/bin/openssl speed -evp aes-256-cbc -engine cryptodev -multi 4
evp 33888.18k 135526.57k 447022.51k 1109458.88k 1423601.97k

vitek

Input from my machine an virtualized pfsense in esxi 5.1. (AES NI working on other win7 guest, so its correctly passthroughed)
ESXI host specs:
Xeon 1220
32gb ram
Intel NICs

pfSense guest specs:
2 cores
1gb ram
VMxNet3 nics

Before kldload aesni

[2.1-BETA1][admin@pfsense.localdomain]/root(1): /usr/bin/openssl speed -evp aes-128-cbc -elapsed
You have chosen to measure elapsed time instead of user CPU time.
To get the most accurate results, try to run this
program when this computer is idle.
Doing aes-128-cbc for 3s on 16 size blocks: 25200854 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 64 size blocks: 7556040 aes-128-cbc's in 3.01s
Doing aes-128-cbc for 3s on 256 size blocks: 1974553 aes-128-cbc's in 3.01s
Doing aes-128-cbc for 3s on 1024 size blocks: 506622 aes-128-cbc's in 3.01s
Doing aes-128-cbc for 3s on 8192 size blocks: 63906 aes-128-cbc's in 3.01s
OpenSSL 0.9.8q 2 Dec 2010
built on: date not available
options:bn(64,64) md2(int) rc4(ptr,int) des(idx,cisc,16,int) aes(partial) blowfish(idx)
compiler: cc
available timing options: USE_TOD HZ=128 [sysconf value]
timing function used: gettimeofday
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
aes-128-cbc 134377.68k 160686.63k 167961.52k 172378.58k 173953.57k

[2.1-BETA1][admin@pfsense.localdomain]/root(3): /usr/local/bin/openssl speed -evp aes-128-cbc -elapsed
You have chosen to measure elapsed time instead of user CPU time.
Doing aes-128-cbc for 3s on 16 size blocks: 111268869 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 64 size blocks: 30363529 aes-128-cbc's in 3.01s
Doing aes-128-cbc for 3s on 256 size blocks: 7753535 aes-128-cbc's in 3.01s
Doing aes-128-cbc for 3s on 1024 size blocks: 1944836 aes-128-cbc's in 3.01s
Doing aes-128-cbc for 3s on 8192 size blocks: 243389 aes-128-cbc's in 3.01s
OpenSSL 1.0.1c 10 May 2012
built on: Sun Jan 27 13:08:29 EST 2013
options:bn(64,64) md2(int) rc4(16x,int) des(idx,cisc,16,int) aes(partial) idea(int) blowfish(idx)
compiler: cc -fPIC -DOPENSSL_PIC -DZLIB_SHARED -DZLIB -DOPENSSL_THREADS -pthread -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,–noexecstack -DL_ENDIAN -DTERMIOS -O3 -DMD32_REG_T=int -Wall -O2 -pipe -fno-strict-aliasing -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
aes-128-cbc 593433.97k 646072.80k 659916.45k 662113.10k 662887.96k

after kldload aesni

[2.1-BETA1][admin@pfsense.localdomain]/root(5): /usr/bin/openssl speed -evp aes-128-cbc -elapsed
You have chosen to measure elapsed time instead of user CPU time.
To get the most accurate results, try to run this
program when this computer is idle.
Doing aes-128-cbc for 3s on 16 size blocks: 2914003 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 64 size blocks: 2776488 aes-128-cbc's in 3.01s
Doing aes-128-cbc for 3s on 256 size blocks: 2127090 aes-128-cbc's in 3.01s
Doing aes-128-cbc for 3s on 1024 size blocks: 1097708 aes-128-cbc's in 3.01s
Doing aes-128-cbc for 3s on 8192 size blocks: 129159 aes-128-cbc's in 3.01s
OpenSSL 0.9.8q 2 Dec 2010
built on: date not available
options:bn(64,64) md2(int) rc4(ptr,int) des(idx,cisc,16,int) aes(partial) blowfish(idx)
compiler: cc
available timing options: USE_TOD HZ=128 [sysconf value]
timing function used: gettimeofday
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
aes-128-cbc 15517.00k 59045.34k 180937.99k 373499.22k 351573.93k

[2.1-BETA1][admin@pfsense.localdomain]/root(6): /usr/local/bin/openssl speed -evp aes-128-cbc -elapsed
You have chosen to measure elapsed time instead of user CPU time.
Doing aes-128-cbc for 3s on 16 size blocks: 2870466 aes-128-cbc's in 3.00s
Doing aes-128-cbc for 3s on 64 size blocks: 2702743 aes-128-cbc's in 3.02s
Doing aes-128-cbc for 3s on 256 size blocks: 2093458 aes-128-cbc's in 3.01s
Doing aes-128-cbc for 3s on 1024 size blocks: 1087780 aes-128-cbc's in 3.01s
Doing aes-128-cbc for 3s on 8192 size blocks: 130583 aes-128-cbc's in 3.01s
OpenSSL 1.0.1c 10 May 2012
built on: Sun Jan 27 13:08:29 EST 2013
options:bn(64,64) md2(int) rc4(16x,int) des(idx,cisc,16,int) aes(partial) idea(int) blowfish(idx)
compiler: cc -fPIC -DOPENSSL_PIC -DZLIB_SHARED -DZLIB -DOPENSSL_THREADS -pthread -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,–noexecstack -DL_ENDIAN -DTERMIOS -O3 -DMD32_REG_T=int -Wall -O2 -pipe -fno-strict-aliasing -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
aes-128-cbc 15309.15k 57359.77k 178177.74k 370331.17k 355652.47k

I can add that i have tested actual VPN performance which conclude.
Speed measured with iperf on 2 windows 7 machines one on LAN and on WAN

If i just route between 2 nets without an tunnel the speeds are well above Gbit speed. CPU usage = ~75%

If i use the vpn tunnel with AES 128 the speed is around 300mbit (around same speed with BSD engine, no hardware , and RSX engine). CPU usage ~40%

If i use the vpn tunnel with NO encryption the speed is still around 300mbit.

Not really sure why as soon as the tunnel is used the speed no more than 300mbit.

Hope this helps!
Let me know if I should test something else.

jimp

You might be hitting a general openvpn limit at some point there, check threads around the forum here, you might at least try this tweak:
http://forum.pfsense.org/index.php/topic,47567.0.html

Your numbers seem to coincide with the similar numbers from the previous tester as well.

Did you happen to try the VPN speed without aesni.ko loaded? Or just with and toggling the engine setting?

vitek

Actually now that you say it. I only tested the vpn speed without the aesni.ko loaded. I should test it with it loaded.

Ill also check the thread with the tweak.

EDIT: I tested with the aesni.ko loaded no speedchange. Might be higher cpu usage though not entirely sure.
Also tested the ip fastforwarding tweak which had no effect.

adam65535

Did anyone ever discover why there was no apparent change in performance with aes-ni enabled? I did a search for aes-ni and aesni but didn't see any further threads. I don't have a system with aes-ni on 2.1 yet.

kejianshi

I see you are testing IPsec earlier and some openvpn. I would be interested in knowing what the maximum throughput you might get with all 4 cores enabled, using 4 separate clients connecting to 1 server each client on a different port with separate openvpn instance for each. Its probably not part of your testing, bit would be interesting to know if it will saturate a gigabit interface.

As far as file transferes from 1 computer to another be careful that drive read/write speed isn't a bottleneck.

jimp

@adam65535:

Did anyone ever discover why there was no apparent change in performance with aes-ni enabled? I did a search for aes-ni and aesni but didn't see any further threads. I don't have a system with aes-ni on 2.1 yet.

Not yet, mostly for lack of a good test setup. We're building up some test rigging/infrastructure to get some good throughput numbers for the new book and for other purposes and I believe some of that hardware does have AES-NI, so we may have better information in the coming months.

adam65535

jimp, If I have time I will probably throw a 2.1 snapshot one of the Dell R320 servers I have and see how the openssl test does on it. I assume it will reveal the same results as everyone else though.

kejianshi, I just don't have time to do that kind of testing right now.

jimp

A single test probably won't really tell us much. What we'd really need to see is a pair of identical systems configured identically back-to-back (but with different IPs/subnets as needed) and see what kind of LAN-to-LAN throughput we can obtain through an active/live VPN in each of the test cases

1. aesni.ko loaded, OpenVPN set to use cryptodev
2. aesni.ko loaded, OpenVPN set to "no hardware"
3. aesni.ko unloaded, OpenVPN set to use cryptodev
4. aesni.ko unloaded, OpenVPN set to "no hardware"