Syslog remote logging problem after reboot
-
Interesting, what is the first entry in /var/log/system.log?
-
Interesting, what is the first entry in /var/log/system.log?
Feb 5 11:25:06 kernel: Copyright (c) 1992-2012 The FreeBSD Project.And because I don't think that that is enough, so here's a bit more:
Feb 5 11:25:06 kernel: Copyright (c) 1992-2012 The FreeBSD Project. Feb 5 11:25:06 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Feb 5 11:25:06 kernel: The Regents of the University of California. All rights reserved. Feb 5 11:25:06 kernel: FreeBSD is a registered trademark of The FreeBSD Foundation. Feb 5 11:25:06 kernel: FreeBSD 8.3-RELEASE-p5 #1: Mon Feb 4 04:12:41 EST 2013 Feb 5 11:25:06 kernel: root@snapshots-8_3-i386.builders.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 i386 Feb 5 11:25:06 kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Feb 5 11:25:06 kernel: CPU: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (2488.27-MHz 686-class CPU) Feb 5 11:25:06 kernel: Origin = "GenuineIntel" Id = 0x6fa Family = 6 Model = f Stepping = 10 Feb 5 11:25:06 kernel: Features=0xfa3fbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,dts,mmx,fxsr,sse,sse2,ss>Feb 5 11:25:06 kernel: Features2=0x80202201 <sse3,ssse3,cx16,x2apic,hv>Feb 5 11:25:06 kernel: AMD Features=0x20100000 <nx,lm>Feb 5 11:25:06 kernel: AMD Features2=0x1 <lahf>Feb 5 11:25:06 kernel: TSC: P-state invariant Feb 5 11:25:06 kernel: real memory = 268435456 (256 MB) Feb 5 11:25:06 kernel: avail memory = 238817280 (227 MB) Feb 5 11:25:06 kernel: ACPI APIC Table: <ptltd apic="">Feb 5 11:25:06 kernel: MADT: Forcing active-low polarity and level trigger for SCI Feb 5 11:25:06 kernel: ioapic0 <version 1.1="">irqs 0-23 on motherboard Feb 5 11:25:06 kernel: wlan: mac acl policy registered Feb 5 11:25:06 kernel: ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. Feb 5 11:25:06 kernel: ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Feb 5 11:25:06 kernel: module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07b9a10, 0) error 1 Feb 5 11:25:06 kernel: ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. Feb 5 11:25:06 kernel: ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Feb 5 11:25:06 kernel: module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07b9ab0, 0) error 1 Feb 5 11:25:06 kernel: ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. Feb 5 11:25:06 kernel: ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Feb 5 11:25:06 kernel: module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07b9b50, 0) error 1 Feb 5 11:25:06 kernel: kbd1 at kbdmux0 Feb 5 11:25:06 kernel: cryptosoft0: <software crypto="">on motherboard Feb 5 11:25:06 kernel: padlock0: No ACE support. Feb 5 11:25:06 kernel: acpi0: <intel 440bx="">on motherboard Feb 5 11:25:06 kernel: acpi0: [ITHREAD] Feb 5 11:25:06 kernel: acpi0: Power Button (fixed) Feb 5 11:25:06 kernel: Timecounter "HPET" frequency 14318180 Hz quality 900 Feb 5 11:25:06 kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 Feb 5 11:25:06 kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 Feb 5 11:25:06 kernel: cpu0: <acpi cpu="">on acpi0 Feb 5 11:25:06 kernel: pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0 Feb 5 11:25:06 kernel: pci0: <acpi pci="" bus="">on pcib0 Feb 5 11:25:06 kernel: pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0 Feb 5 11:25:06 kernel: pci1: <acpi pci="" bus="">on pcib1 Feb 5 11:25:06 kernel: isab0: <pci-isa bridge="">at device 7.0 on pci0 Feb 5 11:25:06 kernel: isa0: <isa bus="">on isab0 Feb 5 11:25:06 kernel: atapci0: <intel piix4="" udma33="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x10c0-0x10cf at device 7.1 on pci0 Feb 5 11:25:06 kernel: ata0: <ata channel="">at channel 0 on atapci0 Feb 5 11:25:06 kernel: ata0: [ITHREAD] Feb 5 11:25:06 kernel: ata1: <ata channel="">at channel 1 on atapci0 Feb 5 11:25:06 kernel: ata1: [ITHREAD] Feb 5 11:25:06 kernel: pci0: <bridge>at device 7.3 (no driver attached) Feb 5 11:25:06 kernel: pci0: <base peripheral=""> at device 7.7 (no driver attached) Feb 5 11:25:06 kernel: vgapci0: <vga-compatible display="">port 0x10d0-0x10df mem 0xd0000000-0xd7ffffff,0xc8800000-0xc8ffffff irq 16 at device 15.0 on pci0 Feb 5 11:25:06 kernel: pcib2: <acpi pci-pci="" bridge="">at device 17.0 on pci0 Feb 5 11:25:06 kernel: pci2: <acpi pci="" bus="">on pcib2 Feb 5 11:25:06 kernel: em0: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.4="">port 0x2000-0x203f mem 0xc9020000-0xc903ffff,0xc9000000-0xc900ffff irq 18 at device 0.0 on pci2 Feb 5 11:25:06 kernel: em0: Memory Access and/or Bus Master bits were not set! Feb 5 11:25:06 kernel: em0: [FILTER] Feb 5 11:25:06 kernel: em1: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.4="">port 0x2040-0x207f mem 0xc9040000-0xc905ffff,0xc9010000-0xc901ffff irq 19 at device 1.0 on pci2 Feb 5 11:25:06 kernel: em1: Memory Access and/or Bus Master bits were not set! Feb 5 11:25:06 kernel: em1: [FILTER] Feb 5 11:25:06 kernel: pcib3: <acpi pci-pci="" bridge="">at device 21.0 on pci0 Feb 5 11:25:06 kernel: pci3: <acpi pci="" bus="">on pcib3 Feb 5 11:25:06 kernel: pcib4: <acpi pci-pci="" bridge="">at device 21.1 on pci0 Feb 5 11:25:06 kernel: pci4: <acpi pci="" bus="">on pcib4 Feb 5 11:25:06 kernel: pcib5: <acpi pci-pci="" bridge="">at device 21.2 on pci0 Feb 5 11:25:06 kernel: pci5: <acpi pci="" bus="">on pcib5 Feb 5 11:25:06 kernel: pcib6: <acpi pci-pci="" bridge="">at device 21.3 on pci0 Feb 5 11:25:06 kernel: pci6: <acpi pci="" bus="">on pcib6 Feb 5 11:25:06 kernel: pcib7: <acpi pci-pci="" bridge="">at device 21.4 on pci0 Feb 5 11:25:06 kernel: pci7: <acpi pci="" bus="">on pcib7 Feb 5 11:25:06 kernel: pcib8: <acpi pci-pci="" bridge="">at device 21.5 on pci0 Feb 5 11:25:06 kernel: pci8: <acpi pci="" bus="">on pcib8 Feb 5 11:25:06 kernel: pcib9: <acpi pci-pci="" bridge="">at device 21.6 on pci0 Feb 5 11:25:06 kernel: pci9: <acpi pci="" bus="">on pcib9 Feb 5 11:25:06 kernel: pcib10: <acpi pci-pci="" bridge="">at device 21.7 on pci0 Feb 5 11:25:06 kernel: pci10: <acpi pci="" bus="">on pcib10 Feb 5 11:25:06 kernel: pcib11: <acpi pci-pci="" bridge="">at device 22.0 on pci0 Feb 5 11:25:06 kernel: pci11: <acpi pci="" bus="">on pcib11 Feb 5 11:25:06 kernel: pcib12: <acpi pci-pci="" bridge="">at device 22.1 on pci0 Feb 5 11:25:06 kernel: pci12: <acpi pci="" bus="">on pcib12 Feb 5 11:25:06 kernel: pcib13: <acpi pci-pci="" bridge="">at device 22.2 on pci0 Feb 5 11:25:06 kernel: pci13: <acpi pci="" bus="">on pcib13 Feb 5 11:25:06 kernel: pcib14: <acpi pci-pci="" bridge="">at device 22.3 on pci0 Feb 5 11:25:06 kernel: pci14: <acpi pci="" bus="">on pcib14 Feb 5 11:25:06 kernel: pcib15: <acpi pci-pci="" bridge="">at device 22.4 on pci0 Feb 5 11:25:06 kernel: pci15: <acpi pci="" bus="">on pcib15 Feb 5 11:25:06 kernel: pcib16: <acpi pci-pci="" bridge="">at device 22.5 on pci0 Feb 5 11:25:06 kernel: pci16: <acpi pci="" bus="">on pcib16 Feb 5 11:25:06 kernel: pcib17: <acpi pci-pci="" bridge="">at device 22.6 on pci0 Feb 5 11:25:06 kernel: pci17: <acpi pci="" bus="">on pcib17 Feb 5 11:25:06 kernel: pcib18: <acpi pci-pci="" bridge="">at device 22.7 on pci0 Feb 5 11:25:06 kernel: pci18: <acpi pci="" bus="">on pcib18 Feb 5 11:25:06 kernel: pcib19: <acpi pci-pci="" bridge="">at device 23.0 on pci0 Feb 5 11:25:06 kernel: pci19: <acpi pci="" bus="">on pcib19 Feb 5 11:25:06 kernel: pcib20: <acpi pci-pci="" bridge="">at device 23.1 on pci0 Feb 5 11:25:06 kernel: pci20: <acpi pci="" bus="">on pcib20 Feb 5 11:25:06 kernel: pcib21: <acpi pci-pci="" bridge="">at device 23.2 on pci0 Feb 5 11:25:06 kernel: pci21: <acpi pci="" bus="">on pcib21 Feb 5 11:25:06 kernel: pcib22: <acpi pci-pci="" bridge="">at device 23.3 on pci0 Feb 5 11:25:06 kernel: pci22: <acpi pci="" bus="">on pcib22 Feb 5 11:25:06 kernel: pcib23: <acpi pci-pci="" bridge="">at device 23.4 on pci0 Feb 5 11:25:06 kernel: pci23: <acpi pci="" bus="">on pcib23 Feb 5 11:25:06 kernel: pcib24: <acpi pci-pci="" bridge="">at device 23.5 on pci0 Feb 5 11:25:06 kernel: pci24: <acpi pci="" bus="">on pcib24 Feb 5 11:25:06 kernel: pcib25: <acpi pci-pci="" bridge="">at device 23.6 on pci0 Feb 5 11:25:06 kernel: pci25: <acpi pci="" bus="">on pcib25 Feb 5 11:25:06 kernel: pcib26: <acpi pci-pci="" bridge="">at device 23.7 on pci0 Feb 5 11:25:06 kernel: pci26: <acpi pci="" bus="">on pcib26 Feb 5 11:25:06 kernel: pcib27: <acpi pci-pci="" bridge="">at device 24.0 on pci0 Feb 5 11:25:06 kernel: pci27: <acpi pci="" bus="">on pcib27 Feb 5 11:25:06 kernel: pcib28: <acpi pci-pci="" bridge="">at device 24.1 on pci0 Feb 5 11:25:06 kernel: pci28: <acpi pci="" bus="">on pcib28 Feb 5 11:25:06 kernel: pcib29: <acpi pci-pci="" bridge="">at device 24.2 on pci0 Feb 5 11:25:06 kernel: pci29: <acpi pci="" bus="">on pcib29 Feb 5 11:25:06 kernel: pcib30: <acpi pci-pci="" bridge="">at device 24.3 on pci0 Feb 5 11:25:06 kernel: pci30: <acpi pci="" bus="">on pcib30 Feb 5 11:25:06 kernel: pcib31: <acpi pci-pci="" bridge="">at device 24.4 on pci0 Feb 5 11:25:06 kernel: pci31: <acpi pci="" bus="">on pcib31 Feb 5 11:25:06 kernel: pcib32: <acpi pci-pci="" bridge="">at device 24.5 on pci0 Feb 5 11:25:06 kernel: pci32: <acpi pci="" bus="">on pcib32 Feb 5 11:25:06 kernel: pcib33: <acpi pci-pci="" bridge="">at device 24.6 on pci0 Feb 5 11:25:06 kernel: pci33: <acpi pci="" bus="">on pcib33 Feb 5 11:25:06 kernel: pcib34: <acpi pci-pci="" bridge="">at device 24.7 on pci0 Feb 5 11:25:06 kernel: pci34: <acpi pci="" bus="">on pcib34 Feb 5 11:25:06 kernel: acpi_acad0: <ac adapter="">on acpi0 Feb 5 11:25:06 kernel: atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0 Feb 5 11:25:06 kernel: atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0 Feb 5 11:25:06 kernel: atkbd0: <at keyboard="">irq 1 on atkbdc0 Feb 5 11:25:06 kernel: kbd0 at atkbd0 Feb 5 11:25:06 kernel: atkbd0: [GIANT-LOCKED] Feb 5 11:25:06 kernel: atkbd0: [ITHREAD] Feb 5 11:25:06 kernel: psm0: <ps 2="" mouse="">irq 12 on atkbdc0 Feb 5 11:25:06 kernel: psm0: [GIANT-LOCKED] Feb 5 11:25:06 kernel: psm0: [ITHREAD] Feb 5 11:25:06 kernel: psm0: model IntelliMouse, device ID 3 Feb 5 11:25:06 kernel: ppc0: <parallel port="">port 0x378-0x37f irq 7 on acpi0 Feb 5 11:25:06 kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode Feb 5 11:25:06 kernel: ppc0: [ITHREAD] Feb 5 11:25:06 kernel: ppbus0: <parallel port="" bus="">on ppc0 Feb 5 11:25:06 kernel: plip0: <plip network="" interface="">on ppbus0 Feb 5 11:25:06 kernel: plip0: [ITHREAD] Feb 5 11:25:06 kernel: lpt0: <printer>on ppbus0 Feb 5 11:25:06 kernel: lpt0: [ITHREAD] Feb 5 11:25:06 kernel: lpt0: Interrupt-driven port Feb 5 11:25:06 kernel: ppi0: <parallel i="" o="">on ppbus0 Feb 5 11:25:06 kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 Feb 5 11:25:06 kernel: uart0: [FILTER] Feb 5 11:25:06 kernel: uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 Feb 5 11:25:06 kernel: uart1: [FILTER] Feb 5 11:25:06 kernel: fdc0: <floppy drive="" controller="">port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 Feb 5 11:25:06 kernel: fdc0: [FILTER] Feb 5 11:25:06 kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Feb 5 11:25:06 kernel: pmtimer0 on isa0 Feb 5 11:25:06 kernel: orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xdc000-0xdffff,0xe0000-0xe7fff pnpid ORM0000 on isa0 Feb 5 11:25:06 kernel: sc0: <system console="">at flags 0x100 on isa0 Feb 5 11:25:06 kernel: sc0: VGA <16 virtual consoles, flags=0x300> Feb 5 11:25:06 kernel: vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Feb 5 11:25:06 kernel: acpi_throttle0: <acpi cpu="" throttling="">on cpu0 Feb 5 11:25:06 kernel: Timecounter "TSC" frequency 2488273863 Hz quality 800 Feb 5 11:25:06 kernel: Timecounters tick every 10.000 msec Feb 5 11:25:06 kernel: IPsec: Initialized Security Association Processing. Feb 5 11:25:06 kernel: ad0: 20480MB <vmware virtual="" ide="" hard="" drive="" 00000001="">at ata0-master UDMA33 Feb 5 11:25:06 kernel: acd0: DVDR <vmware virtual="" ide="" cdrom="" drive="" 00000001="">at ata1-master UDMA33 Feb 5 11:25:06 kernel: Trying to mount root from ufs:/dev/ad0s1a Feb 5 11:25:06 kernel: ad0: FAILURE - SETFEATURES 0x85 status=41 <ready,error>error=4 <aborted>Feb 5 11:25:07 dhclient: PREINIT Feb 5 11:25:07 dhclient: Starting delete_old_states() Feb 5 11:25:07 dhclient: Comparing IPs: Old: New: Feb 5 11:25:07 dhclient: Comparing Routers: Old: New: Feb 5 11:25:07 dhclient[6557]: DHCPREQUEST on em0 to 255.255.255.255 port 67 Feb 5 11:25:07 dhclient[6557]: DHCPACK from 192.168.86.254 Feb 5 11:25:07 dhclient: REBOOT Feb 5 11:25:07 dhclient: Starting delete_old_states() Feb 5 11:25:07 dhclient: Comparing IPs: Old: New: 192.168.86.132 Feb 5 11:25:07 dhclient: Comparing Routers: Old: New: 192.168.86.2 Feb 5 11:25:07 dhclient: Removing states through old gateway '' (new gateway '192.168.86.2') Feb 5 11:25:07 dhclient: Starting add_new_address() Feb 5 11:25:08 dhclient: ifconfig em0 inet 192.168.86.132 netmask 255.255.255.0 broadcast 192.168.86.255 Feb 5 11:25:08 dhclient: New IP Address (em0): 192.168.86.132 Feb 5 11:25:08 dhclient: New Subnet Mask (em0): 255.255.255.0 Feb 5 11:25:08 dhclient: New Broadcast Address (em0): 192.168.86.255 Feb 5 11:25:08 dhclient: New Routers (em0): 192.168.86.2 Feb 5 11:25:08 dhclient: Adding new routes to interface: em0 Feb 5 11:25:08 dhclient: /sbin/route add default 192.168.86.2 Feb 5 11:25:08 dhclient: Creating resolv.conf Feb 5 11:25:08 dhclient[6557]: bound to 192.168.86.132 -- renewal in 900 seconds. Feb 5 11:25:08 php: : Accept router advertisements on interface em0 Feb 5 11:25:08 dhcp6c[14467]: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory Feb 5 11:25:08 dhcp6c[14467]: client6_init: failed initialize control message authentication Feb 5 11:25:08 dhcp6c[14467]: client6_init: skip opening control port Feb 5 11:25:08 check_reload_status: rc.newwanip starting em0 Feb 5 11:25:09 dhcp6c[14558]: client6_send: transmit failed: Can't assign requested address Feb 5 11:25:11 php: : rc.newwanip: Informational is starting em0. Feb 5 11:25:11 php: : rc.newwanip: on (IP address: 192.168.86.132) (interface: wan) (real interface: em0). Feb 5 11:25:11 php: : ROUTING: setting default route to 83.145.208.254 Feb 5 11:25:11 php: : The command '/sbin/route change -inet default '83.145.208.254'' returned exit code '1', the output was 'route: writing to routing socket: Network is unreachable route: writing to routing socket: Network is unreachable change net default: gateway 83.145.208.254: Network is unreachable' Feb 5 11:25:12 check_reload_status: Reloading filter Feb 5 11:25:15 kernel: pflog0: promiscuous mode enabled Feb 5 11:25:18 php: : Resyncing OpenVPN instances for interface WAN. Feb 5 11:25:18 kernel: tun1: changing name to 'ovpns1' Feb 5 11:25:18 kernel: ovpns1: link state changed to UP Feb 5 11:25:18 check_reload_status: rc.newwanip starting ovpns1 Feb 5 11:25:20 php: : Resyncing OpenVPN instances. Feb 5 11:25:20 dhcpleases: Could not deliver signal HUP to process because its pidfile does not exist, No such file or directory. Feb 5 11:25:20 kernel: ovpns1: link state changed to DOWN Feb 5 11:25:20 kernel: ovpns1: link state changed to UP Feb 5 11:25:21 php: : rc.newwanip: Informational is starting ovpns1. Feb 5 11:25:21 php: : rc.newwanip: on (IP address: 192.168.37.201) (interface: ) (real interface: ovpns1). Feb 5 11:25:21 php: : pfSense package system has detected an ip change -> ... Restarting packages. Feb 5 11:25:21 check_reload_status: Starting packages Feb 5 11:25:23 php: : ROUTING: setting default route to 83.145.208.254 Feb 5 11:25:23 php: : The command '/sbin/route change -inet default '83.145.208.254'' returned exit code '1', the output was 'route: writing to routing socket: Network is unreachable route: writing to routing socket: Network is unreachable change net default: gateway 83.145.208.254: Network is unreachable' Feb 5 11:25:23 dhcpleases: Could not deliver signal HUP to process because its pidfile does not exist, No such file or directory. Feb 5 11:25:23 dhcpleases: kqueue error: unkown Feb 5 11:25:23 check_reload_status: Updating all dyndns Feb 5 11:25:24 php: : Restarting/Starting all packages. Feb 5 11:25:26 check_reload_status: Restarting ipsec tunnels Feb 5 11:25:27 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:27 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:28 php: : Creating rrd update script Feb 5 11:25:28 php: : miniupnpd: Starting service on interface: lan Feb 5 11:25:28 miniupnpd[71662]: HTTP listening on port 2189 Feb 5 11:25:28 miniupnpd[71662]: Listening for NAT-PMP traffic on port 5351 Feb 5 11:25:29 php: : Restarting/Starting all packages. Feb 5 11:25:29 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:31 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:31 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:32 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:33 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:34 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:36 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:37 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:38 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:39 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:40 radiusd[47567]: rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Feb 5 11:25:40 radiusd[47567]: rlm_sql (sql): Attempting to connect to radius@192.168.10.10:3306/radius Feb 5 11:25:40 radiusd[47567]: rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 Feb 5 11:25:40 radiusd[47567]: rlm_sql_mysql: Starting connect to MySQL server for #0 Feb 5 11:25:40 radiusd[47567]: rlm_sql (sql): Connected new DB handle, #0 Feb 5 11:25:40 radiusd[47567]: rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 Feb 5 11:25:40 radiusd[47567]: rlm_sql_mysql: Starting connect to MySQL server for #1 Feb 5 11:25:40 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:41 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:43 radiusd[60380]: rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Feb 5 11:25:43 radiusd[60380]: rlm_sql (sql): Attempting to connect to radius@192.168.10.10:3306/radius Feb 5 11:25:43 radiusd[60380]: rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 Feb 5 11:25:43 radiusd[60380]: rlm_sql_mysql: Starting connect to MySQL server for #0 Feb 5 11:25:43 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:44 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:45 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:46 radiusd[75792]: rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Feb 5 11:25:46 radiusd[75792]: rlm_sql (sql): Attempting to connect to radius@192.168.10.10:3306/radius Feb 5 11:25:46 radiusd[75792]: rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 Feb 5 11:25:46 radiusd[75792]: rlm_sql_mysql: Starting connect to MySQL server for #0 Feb 5 11:25:46 radiusd[75792]: rlm_sql (sql): Connected new DB handle, #0 Feb 5 11:25:46 radiusd[75792]: rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 Feb 5 11:25:46 radiusd[75792]: rlm_sql_mysql: Starting connect to MySQL server for #1 Feb 5 11:25:46 radiusd[75792]: rlm_sql (sql): Connected new DB handle, #1 Feb 5 11:25:46 radiusd[75792]: rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 Feb 5 11:25:46 radiusd[75792]: rlm_sql_mysql: Starting connect to MySQL server for #2 Feb 5 11:25:46 radiusd[75792]: rlm_sql (sql): Connected new DB handle, #2 Feb 5 11:25:46 radiusd[75792]: rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 Feb 5 11:25:46 radiusd[75792]: rlm_sql_mysql: Starting connect to MySQL server for #3 Feb 5 11:25:46 radiusd[75792]: rlm_sql (sql): Connected new DB handle, #3 Feb 5 11:25:46 radiusd[75792]: rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 Feb 5 11:25:46 radiusd[75792]: rlm_sql_mysql: Starting connect to MySQL server for #4 Feb 5 11:25:46 radiusd[75792]: rlm_sql (sql): Connected new DB handle, #4 Feb 5 11:25:46 radiusd[75792]: Loaded virtual server <default>Feb 5 11:25:46 radiusd[76076]: Ready to process requests. Feb 5 11:25:47 radiusd[76076]: Signalled to terminate Feb 5 11:25:47 radiusd[76076]: Exiting normally. Feb 5 11:25:47 radiusd[76076]: rlm_sql (sql): Closing sqlsocket 4 Feb 5 11:25:47 radiusd[76076]: rlm_sql (sql): Closing sqlsocket 3 Feb 5 11:25:47 radiusd[76076]: rlm_sql (sql): Closing sqlsocket 2 Feb 5 11:25:47 radiusd[76076]: rlm_sql (sql): Closing sqlsocket 1 Feb 5 11:25:47 radiusd[76076]: rlm_sql (sql): Closing sqlsocket 0 Feb 5 11:25:47 php: : The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?' Feb 5 11:25:48 radiusd[84135]: rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Feb 5 11:25:48 radiusd[84135]: rlm_sql (sql): Attempting to connect to radius@192.168.10.10:3306/radius Feb 5 11:25:48 radiusd[84135]: rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 Feb 5 11:25:48 radiusd[84135]: rlm_sql_mysql: Starting connect to MySQL server for #0 Feb 5 11:25:48 radiusd[84135]: rlm_sql (sql): Connected new DB handle, #0 Feb 5 11:25:48 radiusd[84135]: rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 Feb 5 11:25:48 radiusd[84135]: rlm_sql_mysql: Starting connect to MySQL server for #1 Feb 5 11:25:48 radiusd[84135]: rlm_sql (sql): Connected new DB handle, #1 Feb 5 11:25:48 radiusd[84135]: rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 Feb 5 11:25:48 radiusd[84135]: rlm_sql_mysql: Starting connect to MySQL server for #2 Feb 5 11:25:48 radiusd[84135]: rlm_sql (sql): Connected new DB handle, #2 Feb 5 11:25:48 radiusd[84135]: rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 Feb 5 11:25:48 radiusd[84135]: rlm_sql_mysql: Starting connect to MySQL server for #3 Feb 5 11:25:48 radiusd[84135]: rlm_sql (sql): Connected new DB handle, #3 Feb 5 11:25:48 radiusd[84135]: rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 Feb 5 11:25:48 radiusd[84135]: rlm_sql_mysql: Starting connect to MySQL server for #4 Feb 5 11:25:48 radiusd[84135]: rlm_sql (sql): Connected new DB handle, #4 Feb 5 11:25:48 radiusd[84135]: Loaded virtual server <default>Feb 5 11:25:48 radiusd[84242]: Ready to process requests. Feb 5 11:25:52 login: login on ttyv0 as root Feb 5 11:25:52 sshlockout[91168]: sshlockout/webConfigurator v3.0 starting up Feb 5 11:40:47 dhclient[13939]: DHCPREQUEST on em0 to 192.168.86.254 port 67 Feb 5 11:40:47 dhclient[13939]: DHCPACK from 192.168.86.254 Feb 5 11:40:47 dhclient: RENEW Feb 5 11:40:47 dhclient: Creating resolv.conf Feb 5 11:40:47 dhclient[13939]: bound to 192.168.86.132 -- renewal in 900 seconds. Feb 5 11:45:39 php: /diag_logs.php: Successful login for user 'admin' from: 192.168.10.118 Feb 5 11:45:39 php: /diag_logs.php: Successful login for user 'admin' from: 192.168.10.118 Feb 5 11:48:59 check_reload_status: Syncing firewall Feb 5 11:49:00 syslogd: exiting on signal 15 Feb 5 11:49:00 syslogd: kernel boot file is /boot/kernel/kernel Feb 5 11:49:00 kernel: pflog0: promiscuous mode disabled</default></default></aborted></ready,error></vmware></vmware></acpi></generic></system></isa></floppy></parallel></printer></plip></parallel></parallel></ps></at></keyboard></at></ac></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></intel(r)></intel(r)></acpi></acpi></vga-compatible></bridge></ata></ata></intel></isa></pci-isa></acpi></acpi></acpi></acpi></acpi></intel></software></version></ptltd></lahf></nx,lm></sse3,ssse3,cx16,x2apic,hv></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,dts,mmx,fxsr,sse,sse2,ss> -
Hmm, then you might be facing a different problem or my first entry is unrelated to remote syslogging. I always get:
syslogd: sendto: Network is unreachable -
Yes, it's something diffrent, because now my test server is sending events to remote syslog.
Last events from this server before today were at 2013-01-25 10:55:43, so after that time I might have abused my test server too much…
-
Hi,
I have the same problem with 2.1 (02 feb build).
My syslog server is directly attached to a static NIC of the pfsense box, not using IPv6 but it's not globally disabled. WAN link is pppoe though, if that matter.After a fresh reboot of the pfsense box:
-
nothing on syslog server.
-
if I do some modification on the pfsense syslog parameters page and click on save, I get in remote syslog:
Feb 8 17:04:02 192.168.10.254 syslogd: restart Feb 8 17:04:02 192.168.10.254 syslogd: kernel boot file is /boot/kernel/kernel Feb 8 17:04:02 192.168.10.254 kernel: pflog0: promiscuous mode disabled Feb 8 17:04:02 192.168.10.254 pf:- if I go into a shell on pfsense box, stop syslogd process and restart it, issue is fixed.
Additionnal data:
-
Seeing the "syslogd: sendto: Network is unreachable" message in pfsense logs.
-
no package installed
-
Config:
<syslog><nentries>50</nentries> <logall><remoteserver>192.168.10.1</remoteserver> <remoteserver2><remoteserver3><enable><reverse><nologdefaultblock></nologdefaultblock></reverse></enable></remoteserver3></remoteserver2></logall></syslog> -
-
Try editing this file on your firewall and remove the if statement and closing bracket, so it just runs system_syslogd_start(); no matter what.
See if that helps. -
Hi jimp,
which file should we edit? -
Whoops there should have been a link in there.
http://redmine.pfsense.org/projects/pfsense/repository/revisions/25ed9cf8a4c1bd4155ee4e1881821b9e10501916/diff/etc/rc.bootup
-
Fine, that works for me.
-
So that change fixes the problem?
Or you're OK with testing the change?
-
Oh, sorry! I meant to say, the change worked for my setup (ALIX Board), it fixes the problem. And thanks for looking into this!
-
OK, I took the if statement out and updated the comment. Should be in later snapshots.
-
I've got the same problem with 2.0.3, presumably I could try the same fix? Thanks, Adrian
-
I've got the same problem with 2.0.3, presumably I could try the same fix? Thanks, Adrian
Yes if the same test/code is there on 2.0.x then the same fix should work.
-
Thanks - I'll give it a try in a couple of days and let you know. Adrian.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.