PfSense on a SuperMicro Atom Server Randomly Rebooting
-
Turning RAID on and off is just a BIOS setting, no jumpers or anything on the board for it. SATA ports are the same, there aren't special ones for the RAID. According to SuperMicro, AHCI mode is supported, which is what I have it on now. I'm accomplishing the RAID with gmirror now.
I just swapped the RAM out with a different brand that I happened to have, so I'm going to give this a go now and see what happens. So I went from 8GB of crucial ram to 8GB of Hynix ram that I had left over from a ram upgrade on my laptop.
I just can't think of what would be physically wrong with the board to only give me grief in FreeBSD, but work fine in other linux variants. But if the RAM doesn't do it, I think my only other option is to see if SuperMicro will send me another board. I just don't know if they will.
-
Well it's not the RAM. It rebooted in less than three hours this time.
I've submitted an RMA to SuperMicro, hopefully they'll send a replacement.
-
SuperMicro is shipping a new system board. Hope to have it in a day or two.
-
New system board is in, so we'll soon see if this is the answer.
Interesting side note. It's been up for about 3 hours now. The CPU is running about 10 degrees cooler than on the other board. It was never close to overheating. I just thought it was note worthy that the new one is running cooler.
-
Running 2 of those same boxes here with 2.0.2 amd64 on them.
Never had any issues.. I did read however that a lot of people had temperature issues with them, and to fix them they taped the vents on the FRONT (?!) closed so it forced air in from the back, across the passive CPU cooler, and out through the power supply. Seemed weird, but they say that the temps drop more than 10 degrees C when they do that..
Mine run in the mid 50's, and the chips are specced up to 100 degrees C, so I'm gonna leave mine alone for now.
They're surprisingly fast squid boxes when paired with an intel or samsung SSD.. :) Nice low budget really fast router.
-
The CPU temp on the new system board is sitting at 55-56 degrees celsius. On the only one it was always 65-70 degrees celsius. So it never got to the point that it was over heating, but the difference tells me that there was definitely something going on.
It's been up 1.5 days now without rebooting, so I'm optimistic.
-
Four days and counting. I think it's solved.
-
Curious…how did you end up accomplishing RAID on the replacement board? I understood where you switched to gmirror; did you revert to the onboard RAID again with the new board?
-
Curious…how did you end up accomplishing RAID on the replacement board? I understood where you switched to gmirror; did you revert to the onboard RAID again with the new board?
I did revert back to the onboard raid on the new board and it is working perfectly. I have it set to raid mode in bios and the code base is set to adaptec.
-
We have 2 boxes with this Supermicro board and PFsense 2.0.1 running. One Year it was no problems at all, no restarts, very stable. Since today morning we have the same problem with these two boxes. Suddenly reboots, weird hdd problems (says it's full but it isn't full and fsck and smart and vendor tools say it's all right with hdds). ram is OK. CPU temp on one box 38 and another box 21 Celsius. It's looks like something with cable or sata controller. It's runs with one hdd, no raid.
For 3 month I had the same issue with another boxes (absolut the same hardware configs) at my customers Datacenter. All was running about 6 month good and suddenly both boxes weird problems, reboots and so on. Those problem was solved changing sata cables and hdds from WD black scorpio 160 GB 2,5" to Seagate. Now they running 4 Month with no problems.
And today these problems in our Infrastrucure too :( There was IPMI update at supermicro website -> now installed and waiting if it helps. box #2 since 5 hours -> OK, box #1 since 1 hour updated -> no crashes.
I'll keep You updated if anything goes wrong, but for me now: no more these Boards with pfsense.