What am i doing wrong ?
-
Have a look at Status-Interfaces for your WAN. It needs to have something good for the DNS servers, which should have come along with the 10.1.1.5 DHCP lease. If not, then put a DNS server or 2 in System-General Setup (e.g. the Google DNS Servers 8.8.8.8 and 8.8.4.4)
Can you "ping 8.8.8.8" from the shell - that would show that IP connectivity works, and therefore the problem is likely just in translating names with DNS. -
Have a look at Status-Interfaces for your WAN. It needs to have something good for the DNS servers, which should have come along with the 10.1.1.5 DHCP lease. If not, then put a DNS server or 2 in System-General Setup (e.g. the Google DNS Servers 8.8.8.8 and 8.8.4.4)
Can you "ping 8.8.8.8" from the shell - that would show that IP connectivity works, and therefore the problem is likely just in translating names with DNS.Did all this and more, thought i had it working at one point, as i could ping and traceroute from the pf box to various IP's, and the update manager changed from cannot check for update to running the latest version, but still no browsing.
I rebooted the pf box and my pc 3-4 times each and reset the network adapter in my pc 10 times or more. Each time it came up as pfsense network, showed both local and internet connection, but still no browse. Added my ISP's supplied DNS server IP and the two google ones, nothing helped.
And all i get now is the network comes up local and internet, then drops out, in under 30 seconds, to local only in the Network and Sharing window on my pc.
I just can't work it out, nothing i try seems to fix it. -
Please post a pic of your firewall rules for LAN and WAN, your DHCP settings for LAN and WAN, your general settings page and the gateway status page.
-
What do you mean insert pfsense?
So you now have this
internet - NAT Router (not modem modems do NOT NAT) - pfsense - netgear - switch - pc
And your pfsense of lan is on 192.168.1.0/24 and so is lan of netgear?
Do not connect your netgear using is wan, connect it via is lan to pfsense and TURN off the netear dhcp server..
-
192.168.1.45 is still in the 192.168.1.1/24 subnet that your wifi router is probably using. Each segment needs to be a different subnet, try changing the pfSense LAN to 192.168.100.1 for example.
Steve
-
Please, get some system info what you are doing. Basically you want
- modem as a bridge
- pfsense with the WAN IP assigned directly
- AP somewhere on LAN with everything disabled, incl. the WAN, DHCP and whatever. Totally dumbed AP.
-
^ exactly! This would be normal common setup..
If your "modem" (isp connection device) does not support bridge mode and you have to double nat - then ok, but you sure and the hell do not want to add a triple nat to the mix. Your netgear should be used as just a Access Point.
Then put wan of pfsense into the dmz of your isp device, and control your forwards at pfsense.
-
Thanks, i am aware of how it's supposed to be, it's just not playing fair with me.
I know it's a simple thing i have missed and am missing, but it's driving me around the bend….I wish i could have the WAP as a standalone, but even following the Netgear instructions on how to set it as one fails....this bloody thing will be the death of me.
I'm sure i will figure it out one day, but right now it's beginning to piss me off. -
Well - Do things in baby steps.
Put the wireless router aside. Get yourself a cat 5 cable. Connect that to the LAN of pfsense and your computer. Directly connect your pfsesne WAN to the modem also. Get that working.
If you intend to have an OPT1 interface, create that and test it directly connected to your computer. Get that working.
Then when modem > pfsense is working perfectly, then add the wireless AP to the picture.
In my opinion, currently, you can't know what is and is not working.
-
And as for Netgear AP, there are tons of alternative much better firmwares, such as DD-WRT, Tomato or OpenWRT. Sadly, for your prehistoric model, the only way is to solder something better than the crappy 1MB chip on the board. Best dumped, frankly. Not worth the waste of time.
-
Yeah its not worth time and effort dicking with older wireless routers if you ask me. I just picked up a tp-link dual band wdr3600 I believe is the model number for $42 to my door.
Took all of 30 seconds to put dd-wrt on it.. And now got nice stable N both 2.4 and 5ghz AP – my old reliable wrt54gL was still working - but it was about time I moved to N.. only thing left that was g is my sons old laptop everything else is N.
As to getting it to work as AP - what do they have you doing.. The thing already has a 192.168.1.1 address right, leave it at that change pfsense to say .254 and turn off netgear dhcp server = bing bang zoom accesspoint. Just connect it to your switch or pfsense via the netgears LAN port.. Put some tape over the wan port on the netgear you have no use for it if using it as AP.
-
If you have all three routers in line they must have different subnets between them. Did you try my earlier suggestion?
Steve
-
If you have all three routers in line they must have different subnets between them. Did you try my earlier suggestion?
Steve
Im not sure if i tried all the things everyone suggested so far, i haven't had time in the last couple of days to do much.
I've had family issues come up , and have had no time for network tinkering, especially when my server 2003 box died and i had to
spend time getting that fixed.
I haven't given up, i'm still tinkering, just a few minutes a day instead of the few hours i would normally have. -
And as for Netgear AP, there are tons of alternative much better firmwares, such as DD-WRT, Tomato or OpenWRT. Sadly, for your prehistoric model, the only way is to solder something better than the crappy 1MB chip on the board. Best dumped, frankly. Not worth the waste of time.
I know it's old, but once it's set-up. it is stable and does what i need, i rarely use the wireless, it's mainly inline to use it as a second switching device.
I will be buying a real switch soon, and an dedicated WAP device to replace the Netgear, but each time i save the money for it, something comes up that eats up the savings…
It's hard to save any cash with the house, car and 5 kids , especially as i'm on a pension. -
How long does it take to turn off the dhcp server? That is ALL you have to do to turn that router into a accesspoint, and not use its wan/internet port to connect it to your network.
You have to uncheck 1 box, and connect it to your network via one of its lan ports vs its wan/internet and shazam its an AP
-
How long does it take to turn off the dhcp server? That is ALL you have to do to turn that router into a accesspoint, and not use its wan/internet port to connect it to your network.
You have to uncheck 1 box, and connect it to your network via one of its lan ports vs its wan/internet and shazam its an AP
I thank you for the post, but seriously, this thing is not a simple matter of unchecking a radio button….its a f**king nightmare this bloody thing, from day one it's been a son of a bitch.....i change one thing in it i can't access it...and have to reset to default...it's a feckin' nightmare....i swear.....but like i said, when i have the time to tinker i will, i have far more important things to think about this week, i have a funeral to organise now, and now a 16 month old grandchild just diagnosed with a hole in her heart. Damn firewall can wait.
The only reason i have replied to this post is to show i have read all, and am appreciating the assistance...when i can i will get back to the issue, but for now, it's of no importance.
-
Dude I have no idea what you have done in the past - but I am telling you to turn ANY wireless router into an access point is simple disable of dhcp on the wireless router, and connect it via LAN port. That is it.
I looked on your routers web ui via emulator and to disable dhcp all that is required is uncheck the enable box and click save..
I have done this on hundreds of wireless routers.. No matter the make, no matter the brand. In your setup you don't even have to change the wireless routers lan IP.. Since its on the default network pfsense lan network defaults too.. All you have to do is change pfsense lan IP to not be 192.168.1.1 - make it 192.168.1.254 for example. As long as you don't have something else already using 192.168.1.254 your ready to go. Just connect in your wireless router via its LAN PORT to your pfsense lan inteface or a switch connected to your pfsense lan port already. And you done!
If this takes you more than 30 seconds then your doing something wrong!
-
Dude I have no idea what you have done in the past - but I am telling you to turn ANY wireless router into an access point is simple disable of dhcp on the wireless router, and connect it via LAN port. That is it.
I looked on your routers web ui via emulator and to disable dhcp all that is required is uncheck the enable box and click save..
I have done this on hundreds of wireless routers.. No matter the make, no matter the brand. In your setup you don't even have to change the wireless routers lan IP.. Since its on the default network pfsense lan network defaults too.. All you have to do is change pfsense lan IP to not be 192.168.1.1 - make it 192.168.1.254 for example. As long as you don't have something else already using 192.168.1.254 your ready to go. Just connect in your wireless router via its LAN PORT to your pfsense lan inteface or a switch connected to your pfsense lan port already. And you done!
If this takes you more than 30 seconds then your doing something wrong!
I did that already and it did nothing, but somehow, its working now, i reset it to default, and suddenly it came up working.
Stupid thing is, i had done this a dozen or more times already.Thanks to all who offered suggestions, everything is working now.
-
Even me? :-\
-
What do you mean did nothing? Its not suppose to really do anything - you just turned of its dhcp server.. Do you mean you turned it off and it was still running?