V2.1 - Enabling TRIM for SSD users
-
It's not sufficient to use the steps mentioned above. You also need to be using the ahci module, unless something changed in a later snap.
see: http://forum.pfsense.org/index.php/topic,63656.0.html
add ahci_load="YES" to /boot/loader.conf.localSee #20 for a way to convert you to ufslabels so that changing from ad* to ada* doesn't break your boot.
The AHCI module should be included in snapshots now (I just updated a VM and checked, it's there). Also look at /usr/local/sbin/ufslabels.sh - that would eliminate the need to make any fstab edits. Too late for 2.1 to grow an installer option for it, but perhaps for 2.2. -
It´s very simple to add TRIM to SSD disks now, it´s just hard to find out how in the first place.
Here´s what I did today:
Login with SSH and open the shell.
Run /usr/local/sbin/ufslabels.sh
Add the line ahci_load="YES" to /boot/loader.conf.local
reboot the machine
Login with SSH and open the shell
touch /root/TRIM_set; /etc/rc.rebootOnce the machine has rebooted check the status with: tunefs -p /
[2.1-RELEASE][admin@pfSense.hemma]/root(1): tunefs -p /
tunefs: POSIX.1e ACLs: (-a) disabled
tunefs: NFSv4 ACLs: (-N) disabled
tunefs: MAC multilabel: (-l) disabled
tunefs: soft updates: (-n) disabled
tunefs: gjournal: (-J) disabled
tunefs: trim: (-t) enabled
tunefs: maximum blocks per file in a cylinder group: (-e) 2048
tunefs: average file size: (-f) 16384
tunefs: average number of files in a directory: (-s) 64
tunefs: minimum percentage of free space: (-m) 8%
tunefs: optimization preference: (-o) time
tunefs: volume label: (-L)All done I guess
-
It's not sufficient to use the steps mentioned above. You also need to be using the ahci module, unless something changed in a later snap.
see: http://forum.pfsense.org/index.php/topic,63656.0.html
add ahci_load="YES" to /boot/loader.conf.localSee #20 for a way to convert you to ufslabels so that changing from ad* to ada* doesn't break your boot.
The AHCI module should be included in snapshots now (I just updated a VM and checked, it's there). Also look at /usr/local/sbin/ufslabels.sh - that would eliminate the need to make any fstab edits. Too late for 2.1 to grow an installer option for it, but perhaps for 2.2.My tunefs shows trim enabled without anything but the command in the first post.
-
I'm seeing the trim not enabled warning in my dmesg output.
I'm hesitant to break my pfSense box by poking at things I don't really understand and looking at the other topic I'm not seeing disk labels like they are discussing. Mine are /dev/ad12sla and /dev/ad12slb will the conversion script deal with these properly?
Adding to me hesitation, what impact will this have for the next update, will I have to find this info and make the changes again? If I do an update with this in place will it break my box?
Is enabling trim worth the risk of making these changes?
I really wish I had an SSD in my test box, that would be less scary than running these on my live system.
-
Above steps worked fine for me… on two different boxes.
-
stan-qaz - I think it really depends on the SSD.
Oddly enough, if you get a 2008/2009ish SLC SSD which run about $50 on ebay, those work well without incident for me (so far) without TRIM.
If you get a 2010/2011ish MLC SSD without TRIM, you might get trouble in short order.
If you get a newer 2013ish small MLC SSD with a newer sandforce controller and newer highly durable garbage collection you again would probably be OK. (According to specs anyway)
In all scenarios with MLC, your are far better off with TRIM than without.
-
I ran the command and got the following, the "swapoff invalid" argument is worrisome. I'm not feeling really confident so I did a backup of my original fstab in hopes that if I need it I can somehow replace it.
[2.1-RELEASE][root@pfsense.home]/root(6): /usr/local/sbin/ufslabels.sh FS: / on device ad12s1a with ufsid 50f89405e017f40f FS: Swap on device ad12s1b ==================== Current fstab: # Device Mountpoint FStype Options Dump Pass# /dev/ad12s1a / ufs rw,noatime 1 1 /dev/ad12s1b none swap sw 0 0 ==================== New fstab: # Device Mountpoint FStype Options Dump Pass# /dev/ufsid/50f89405e017f40f / ufs rw,noatime 1 1 /dev/label/swap none swap sw 0 0 Commit changes? (y/n): y Disabling swap to apply label swapoff: /dev/ad12s1b: Invalid argument Applying label to swap parition Activating new fstab Re-enabling swapAdded the load module line and I'm going to reboot once I've downloaded the 2.1 boot CD.
-
It seems to have worked, no obvious error messages. My dmesg output for the SSD is now looking like this:
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 ada0: <m4-ct064m4ssd2 040h="">ATA-9 SATA 3.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 61057MB (125045424 512 byte sectors: 16H 63S/T 16383C)</m4-ct064m4ssd2>I'll print out a cheat sheet for this just in case. :-)
-
It's not sufficient to use the steps mentioned above. You also need to be using the ahci module, unless something changed in a later snap.
see: http://forum.pfsense.org/index.php/topic,63656.0.html
add ahci_load="YES" to /boot/loader.conf.localSee #20 for a way to convert you to ufslabels so that changing from ad* to ada* doesn't break your boot.
The AHCI module should be included in snapshots now (I just updated a VM and checked, it's there). Also look at /usr/local/sbin/ufslabels.sh - that would eliminate the need to make any fstab edits. Too late for 2.1 to grow an installer option for it, but perhaps for 2.2.I don't know if I have to start a new topic, or can reply here.
I also am trying to enable TRIM, and tried the following steps
http://forum.pfsense.org/index.php/topic,63656.msg344604.html#msg344604
But I don't understand step 6.
When I reboot the system, I can choose to escape to loader prompt by pressing '7'
Is that correct or do I have to do something else?
Do I even need to do all those steps?My motherboard is Supermicro X7SP-HF-D525 and I am using an Intel 320 series SSD.
-
Thanks very much for consolidating all of the steps into one easily followable list! Worked perfectly!
It´s very simple to add TRIM to SSD disks now, it´s just hard to find out how in the first place.
Here´s what I did today:
Login with SSH and open the shell.
Run /usr/local/sbin/ufslabels.sh
Add the line ahci_load="YES" to /boot/loader.conf.local
reboot the machine
Login with SSH and open the shell
touch /root/TRIM_set; /etc/rc.rebootOnce the machine has rebooted check the status with: tunefs -p /
[2.1-RELEASE][admin@pfSense.hemma]/root(1): tunefs -p /
tunefs: POSIX.1e ACLs: (-a) disabled
tunefs: NFSv4 ACLs: (-N) disabled
tunefs: MAC multilabel: (-l) disabled
tunefs: soft updates: (-n) disabled
tunefs: gjournal: (-J) disabled
tunefs: trim: (-t) enabled
tunefs: maximum blocks per file in a cylinder group: (-e) 2048
tunefs: average file size: (-f) 16384
tunefs: average number of files in a directory: (-s) 64
tunefs: minimum percentage of free space: (-m) 8%
tunefs: optimization preference: (-o) time
tunefs: volume label: (-L)All done I guess
-
Had to go back and re-read some of these posts regarding "Trim" to answer a question for a friend.
Any chance this (TRIM_set) will become an advanced system setup checkbox on an upcoming release?? I mean SSDs are becoming "de rigueur" and the release of FreeBSD now being employed does support the Trim command. I'll ask nicely…. PLEASE?
edit: I'll be greedy while I'm asking... also have it be an installation setup option?
Rick
-
It's not sufficient to use the steps mentioned above. You also need to be using the ahci module, unless something changed in a later snap.
see: http://forum.pfsense.org/index.php/topic,63656.0.html
add ahci_load="YES" to /boot/loader.conf.localSee #20 for a way to convert you to ufslabels so that changing from ad* to ada* doesn't break your boot.
The AHCI module should be included in snapshots now (I just updated a VM and checked, it's there). Also look at /usr/local/sbin/ufslabels.sh - that would eliminate the need to make any fstab edits. Too late for 2.1 to grow an installer option for it, but perhaps for 2.2.My tunefs shows trim enabled without anything but the command in the first post.
Exactly the same to me. Disk used:
Model Family: SandForce Driven SSDs
Device Model: KINGSTON SV300S37A60G2.1-RELEASE (amd64)
built on Wed Sep 11 18:17:34 EDT 2013
FreeBSD 8.3-RELEASE-p11Platform: nanobsd (4g)
-
Hello,
I managed to enable TRIM on a Samsung 840 Pro SSD, but not so simply.
The appliance used is a Teak 5020. By default AHCI is not enabled in the bios, and i used ufslabels.sh before enabling AHCI in the bios.
After, ufsid was set but the TRIM_set trick was not working.
I enabled AHCI, rebooted, then after started in single user mode, issued '/sbin/mount', and then "/sbin/tunefs -t enable /dev/ufsid/533f10e87e412553" (adapt with your own ufsid).
Then "./tunefs -p /" returns well "tunefs: trim: (-t) enabled".
However "camcontrol identity ada0" does not show that TRIM is enabled :
"data set management (TRIM) yes [empty]"
Any idea ?
Thank you -
I also have a samsung SSD and i cant enable trim. Using the latest pfsense 2.1.4
Please help
-
What have you tried? What was the result? What board is it connected to?
Steve
-
added the following
Login with SSH or locally and open a shell
Run /usr/local/sbin/ufslabels.sh
Add ahci_load="YES" to /boot/loader.conf.local
Reboottouch /root/TRIM_set; /etc/rc.reboot
When i try to boot in single user mode i get a kernel panic.
Hardware
Supermicro SuperServer 5018A-FTN4 with 16GB ECC ram.
Samsung pro 120GB SSD.pfsense 2.1.4
-
Did you set the SATA controller to AHCI mode in the BIOS?
Steve
-
You may try this instead in single user mode:
/sbin/tunefs -t enable /
After that reboot and then run tunefs -p /
The touch /root/TRIM_set; /etc/rc.reboot has been removed in the newer version.
-
Hi,
Took a look, and it does seem that this allows enabling TRIM - that's great. But I do have a couple questions,
- is there a way to check what the current state is?
- if TRIM hasn't been on so far, is there a way to tell the SSD / BIOS to clean up the SSD?
Thanks!
-
added the following
Login with SSH or locally and open a shell
Run /usr/local/sbin/ufslabels.sh
Add ahci_load="YES" to /boot/loader.conf.local
Reboottouch /root/TRIM_set; /etc/rc.reboot
When i try to boot in single user mode i get a kernel panic.
Hardware
Supermicro SuperServer 5018A-FTN4 with 16GB ECC ram.
Samsung pro 120GB SSD.pfsense 2.1.4
cfipilot - have you been able to get TRIM working? I have pretty much the same hardware except only using 8GB ECC RAM for now. I have a Samsung 840 Pro 120GB, is that what you are using?
I wrote in another thread which was a bit newer (dealing with 2.1.1 as opposed to 2.1), but maybe the issue is hardware specific or it could just be my lack of FreeBSD knowledge…
I seem to have a problem with the TRIM enabled setting remaining after reboot.
Once I executed /sbin/tunefs -t enable / what exactly should I do. I can't run /etc/rc.reboot because I get the following:
lockf: cannot open /tmp/config.lock: Read-only file system Cannot reboot at this moment, a config write operation is in progress, and 30 seconds have passedIf I just exit single-user mode then when restart and /sbin/tunefs -t enable / it indicates it is disabled.
FYI - already added ahci_load="YES" to /boot/load.conf.local
3vian
