Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Intel i354 support in 2.1

    Scheduled Pinned Locked Moved Hardware
    25 Posts 9 Posters 12.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • P
      peersu
      last edited by

      Looking forward to the update… I just bought the SuperMicro Rangeley 1U kit, and would love to get pfSense working on it :)

      1 Reply Last reply Reply Quote 0
      • J
        jasonlitka
        last edited by

        @peersu:

        Looking forward to the update… I just bought the SuperMicro Rangeley 1U kit, and would love to get pfSense working on it :)

        In the interim you could install vSphere on it and create a VM.

        http://www.servethehome.com/how-to-intel-i354-avoton-rangeley-adapter-vmware-esxi-5-5/

        I can break anything.

        1 Reply Last reply Reply Quote 0
        • P
          peersu
          last edited by

          Ah, that is exactly what I will do…thank you for the suggestion.

          One other thing I never had to deal with until I bought this barebones kit... it seems overly difficult to find SODIMM DDR3 w/ ECC from a vendor 'in stock'.

          Any suggestions for this new board? The compatible memory modules listed by SuperMicro turn up nothing.  Alternatively,  I found one DIMM from Amazon of:

          Kingston Technology ValueRAM 8GB 1333MHz DDR3L ECC CL9 SODIMM 1.35V Notebook Memory KVR13LSE9/8

          ... which I bought because it's all I could find from a vendor that has a return policy I trust.  I'd much prefer two sticks of  DDR3-1600 if I can find it.

          1 Reply Last reply Reply Quote 0
          • J
            jasonlitka
            last edited by

            @peersu:

            Ah, that is exactly what I will do…thank you for the suggestion.

            One other thing I never had to deal with until I bought this barebones kit... it seems overly difficult to find SODIMM DDR3 w/ ECC from a vendor 'in stock'.

            Any suggestions for this new board? The compatible memory modules listed by SuperMicro turn up nothing.  Alternatively,  I found one DIMM from Amazon of:

            Kingston Technology ValueRAM 8GB 1333MHz DDR3L ECC CL9 SODIMM 1.35V Notebook Memory KVR13LSE9/8

            ... which I bought because it's all I could find from a vendor that has a return policy I trust.  I'd much prefer two sticks of  DDR3-1600 if I can find it.

            Kingston:
            http://shop.kingston.com/partsinfo.aspx?ktcpartno=KVR16LSE11/8 - Due 11/25/2013
            http://shop.kingston.com/partsinfo.aspx?ktcpartno=KVR13LSE9/8 - In Stock

            Crucial (not sure if they have real-time inventory):
            http://www.crucial.com/store/partspecs.aspx?IMODULE=CT102472BF1339

            I can break anything.

            1 Reply Last reply Reply Quote 0
            • D
              demco
              last edited by

              @peersu:

              Looking forward to the update… I just bought the SuperMicro Rangeley 1U kit, and would love to get pfSense working on it :)

              Did you test if pfSense will boot on the machine? Will usb, sata and other peripherals be recognized? Since this is a complete new SoC.

              1 Reply Last reply Reply Quote 0
              • P
                peersu
                last edited by

                Nope… I'm installing ESXi first, and then pfSense... at least until it's supported; not going to waste so much time trying to get /maybe/ one thing to work, for another to break, etc.

                1 Reply Last reply Reply Quote 0
                • ?
                  Guest
                  last edited by

                  Looking forward to the update… I just bought the SuperMicro Rangeley 1U kit, and would love to get pfSense working on it

                  This is the same Supermicro hardware (maybe your ram and disk are different).

                  I wouldn't say the port is complete by any stretch (for example, the QuickAssist part isn't working), but there are results 8) :

                  enjoy!  :D

                  KDB: debugger backends: ddb      1                                                 
                  KDB: current backend: ddb
                  Copyright © 1992-2012 The FreeBSD Project.
                  Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                  The Regents of the University of California. All rights reserved.
                  FreeBSD is a registered trademark of The FreeBSD Foundation.
                  FreeBSD 8.3-RELEASE-p12 #0: Thu Dec  5 16:03:14 EST 2013
                      root@rebrand-dedicated-<redacted>-8.3-amd64.builders.pfsense.org:/usr/obj.<also-redacted>/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
                  Timecounter "i8254" frequency 1193182 Hz quality 0
                  CPU: Genuine Intel(R) CPU        @ 2.40GHz (2400.10-MHz K8-class CPU)
                    Origin = "GenuineIntel"  Id = 0x406d8  Family = 6  Model = 4d  Stepping = 8
                    Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x43d8e3bf<sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,movbe,popcnt,tscdlt,aesni,<b30>>
                    AMD Features=0x28100800 <syscall,nx,rdtscp,lm>AMD Features2=0x101 <lahf,prefetch>TSC: P-state invariant
                  real memory  = 8589934592 (8192 MB)
                  avail memory = 8203595776 (7823 MB)
                  ACPI APIC Table: <intel  tiano ="">FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
                  FreeBSD/SMP: 1 package(s) x 8 core(s)
                  cpu0 (BSP): APIC ID:  0
                  cpu1 (AP): APIC ID:  2
                  cpu2 (AP): APIC ID:  4
                  cpu3 (AP): APIC ID:  6
                  cpu4 (AP): APIC ID:  8
                  cpu5 (AP): APIC ID: 10
                  cpu6 (AP): APIC ID: 12
                  cpu7 (AP): APIC ID: 14
                  ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20101013/tbfadt-392)
                  ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20101013/tbfadt-707)
                  ioapic0 <version 2.0="">irqs 0-23 on motherboard
                  wlan: mac acl policy registered
                  ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff804aa8d0, 0) error 1
                  ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff804aa970, 0) error 1
                  ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff804aaa10, 0) error 1
                  kbd1 at kbdmux0
                  cryptosoft0: <software crypto="">on motherboard
                  padlock0: No ACE support.
                  acpi0: <alaska a="" m="" i="">on motherboard
                  acpi0: [ITHREAD]
                  acpi0: Power Button (fixed)
                  Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                  acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
                  cpu0: <acpi cpu="">on acpi0
                  cpu1: <acpi cpu="">on acpi0
                  cpu2: <acpi cpu="">on acpi0
                  cpu3: <acpi cpu="">on acpi0
                  cpu4: <acpi cpu="">on acpi0
                  cpu5: <acpi cpu="">on acpi0
                  cpu6: <acpi cpu="">on acpi0
                  cpu7: <acpi cpu="">on acpi0
                  pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                  pci0: <acpi pci="" bus="">on pcib0
                  pcib1: <acpi pci-pci="" bridge="">mem 0xdf2e0000-0xdf2fffff irq 16 at device 1.0 on pci0
                  pci1: <acpi pci="" bus="">on pcib1
                  pcib2: <acpi pci-pci="" bridge="">at device 0.0 on pci1
                  pci2: <acpi pci="" bus="">on pcib2
                  vgapci0: <vga-compatible display="">port 0xd000-0xd07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 16 at device 0.0 on pci2
                  pcib3: <acpi pci-pci="" bridge="">mem 0xdf2c0000-0xdf2dffff irq 16 at device 2.0 on pci0
                  pci3: <acpi pci="" bus="">on pcib3
                  pci3: <serial bus,="" usb="">at device 0.0 (no driver attached)
                  pcib4: <acpi pci-pci="" bridge="">mem 0xdf2a0000-0xdf2bffff irq 20 at device 3.0 on pci0
                  pci4: <acpi pci="" bus="">on pcib4
                  pci0: <processor>at device 11.0 (no driver attached)
                  pci0: <base peripheral=""> at device 15.0 (no driver attached)
                  pci0: <base peripheral=""> at device 19.0 (no driver attached)
                  igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0xe0c0-0xe0df mem 0xdf260000-0xdf27ffff,0xdf30c000-0xdf30ffff irq 20 at device 20.0 on pci0
                  igb0: Using MSIX interrupts with 9 vectors
                  igb0: [ITHREAD]
                  igb0: Bound queue 0 to cpu 0
                  igb0: [ITHREAD]
                  igb0: Bound queue 1 to cpu 1
                  igb0: [ITHREAD]
                  igb0: Bound queue 2 to cpu 2
                  igb0: [ITHREAD]
                  igb0: Bound queue 3 to cpu 3
                  igb0: [ITHREAD]
                  igb0: Bound queue 4 to cpu 4
                  igb0: [ITHREAD]
                  igb0: Bound queue 5 to cpu 5
                  igb0: [ITHREAD]
                  igb0: Bound queue 6 to cpu 6
                  igb0: [ITHREAD]
                  igb0: Bound queue 7 to cpu 7
                  igb0: [ITHREAD]
                  igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0xe0a0-0xe0bf mem 0xdf240000-0xdf25ffff,0xdf308000-0xdf30bfff irq 21 at device 20.1 on pci0
                  igb1: Using MSIX interrupts with 9 vectors
                  igb1: [ITHREAD]
                  igb1: Bound queue 0 to cpu 0
                  igb1: [ITHREAD]
                  igb1: Bound queue 1 to cpu 1
                  igb1: [ITHREAD]
                  igb1: Bound queue 2 to cpu 2
                  igb1: [ITHREAD]
                  igb1: Bound queue 3 to cpu 3
                  igb1: [ITHREAD]
                  igb1: Bound queue 4 to cpu 4
                  igb1: [ITHREAD]
                  igb1: Bound queue 5 to cpu 5
                  igb1: [ITHREAD]
                  igb1: Bound queue 6 to cpu 6
                  igb1: [ITHREAD]
                  igb1: Bound queue 7 to cpu 7
                  igb1: [ITHREAD]
                  igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0xe080-0xe09f mem 0xdf220000-0xdf23ffff,0xdf304000-0xdf307fff irq 22 at device 20.2 on pci0
                  igb2: Using MSIX interrupts with 9 vectors
                  igb2: [ITHREAD]
                  igb2: Bound queue 0 to cpu 0
                  igb2: [ITHREAD]
                  igb2: Bound queue 1 to cpu 1
                  igb2: [ITHREAD]
                  igb2: Bound queue 2 to cpu 2
                  igb2: [ITHREAD]
                  igb2: Bound queue 3 to cpu 3
                  igb2: [ITHREAD]
                  igb2: Bound queue 4 to cpu 4
                  igb2: [ITHREAD]
                  igb2: Bound queue 5 to cpu 5
                  igb2: [ITHREAD]
                  igb2: Bound queue 6 to cpu 6
                  igb2: [ITHREAD]
                  igb2: Bound queue 7 to cpu 7
                  igb2: [ITHREAD]
                  igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0xe060-0xe07f mem 0xdf200000-0xdf21ffff,0xdf300000-0xdf303fff irq 23 at device 20.3 on pci0
                  igb3: Using MSIX interrupts with 9 vectors
                  igb3: [ITHREAD]
                  igb3: Bound queue 0 to cpu 0
                  igb3: [ITHREAD]
                  igb3: Bound queue 1 to cpu 1
                  igb3: [ITHREAD]
                  igb3: Bound queue 2 to cpu 2
                  igb3: [ITHREAD]
                  igb3: Bound queue 3 to cpu 3
                  igb3: [ITHREAD]
                  igb3: Bound queue 4 to cpu 4
                  igb3: [ITHREAD]
                  igb3: Bound queue 5 to cpu 5
                  igb3: [ITHREAD]
                  igb3: Bound queue 6 to cpu 6
                  igb3: [ITHREAD]
                  igb3: Bound queue 7 to cpu 7
                  igb3: [ITHREAD]
                  ehci0: <ehci (generic)="" usb="" 2.0="" controller="">mem 0xdf317000-0xdf3173ff irq 23 at device 22.0 on pci0
                  ehci0: [ITHREAD]
                  usbus0: EHCI version 1.0
                  usbus0: <ehci (generic)="" usb="" 2.0="" controller="">on ehci0
                  ahci0: <ahci sata="" controller="">port 0xe150-0xe157,0xe140-0xe143,0xe130-0xe137,0xe120-0xe123,0xe040-0xe05f mem 0xdf316000-0xdf3167ff irq 19 at device 23.0 on pci0
                  ahci0: [ITHREAD]
                  ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported
                  ahcich0: <ahci channel="">at channel 0 on ahci0
                  ahcich0: [ITHREAD]
                  ahcich1: <ahci channel="">at channel 1 on ahci0
                  ahcich1: [ITHREAD]
                  ahcich2: <ahci channel="">at channel 2 on ahci0
                  ahcich2: [ITHREAD]
                  ahcich3: <ahci channel="">at channel 3 on ahci0
                  ahcich3: [ITHREAD]
                  ahci1: <ahci sata="" controller="">port 0xe110-0xe117,0xe100-0xe103,0xe0f0-0xe0f7,0xe0e0-0xe0e3,0xe020-0xe03f mem 0xdf315000-0xdf3157ff irq 19 at device 24.0 on pci0
                  ahci1: [ITHREAD]
                  ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
                  ahcich4: <ahci channel="">at channel 0 on ahci1
                  ahcich4: [ITHREAD]
                  ahcich5: <ahci channel="">at channel 1 on ahci1
                  ahcich5: [ITHREAD]
                  isab0: <pci-isa bridge="">at device 31.0 on pci0
                  isa0: <isa bus="">on isab0
                  pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
                  acpi_hpet0: <high precision="" event="" timer="">on acpi0
                  device_attach: acpi_hpet0 attach returned 12
                  atrtc0: <at realtime="" clock="">port 0x70-0x77 irq 8 on acpi0
                  atrtc0: Warning: Couldn't map I/O.
                  uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                  uart0: [FILTER]
                  uart0: console (115200,n,8,1)
                  uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                  uart1: [FILTER]
                  orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
                  sc0: <system console="">at flags 0x100 on isa0
                  sc0: CGA <16 virtual consoles, flags=0x300>
                  vga0: <generic isa="" vga="">at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
                  atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
                  atkbd0: <at keyboard="">irq 1 on atkbdc0
                  kbd0 at atkbd0
                  atkbd: unable to get the current command byte value.
                  atkbd0: [GIANT-LOCKED]
                  atkbd0: [ITHREAD]
                  psm0: unable to get the current command byte value.
                  ppc0: cannot reserve I/O port range
                  est0: <enhanced speedstep="" frequency="" control="">on cpu0
                  p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                  est1: <enhanced speedstep="" frequency="" control="">on cpu1
                  p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                  est2: <enhanced speedstep="" frequency="" control="">on cpu2
                  p4tcc2: <cpu frequency="" thermal="" control="">on cpu2
                  est3: <enhanced speedstep="" frequency="" control="">on cpu3
                  p4tcc3: <cpu frequency="" thermal="" control="">on cpu3
                  est4: <enhanced speedstep="" frequency="" control="">on cpu4
                  p4tcc4: <cpu frequency="" thermal="" control="">on cpu4
                  est5: <enhanced speedstep="" frequency="" control="">on cpu5
                  p4tcc5: <cpu frequency="" thermal="" control="">on cpu5
                  est6: <enhanced speedstep="" frequency="" control="">on cpu6
                  p4tcc6: <cpu frequency="" thermal="" control="">on cpu6
                  est7: <enhanced speedstep="" frequency="" control="">on cpu7
                  p4tcc7: <cpu frequency="" thermal="" control="">on cpu7
                  Timecounters tick every 1.000 msec
                  IPsec: Initialized Security Association Processing.
                  usbus0: 480Mbps High Speed USB v2.0
                  ugen0.1: <intel>at usbus0
                  uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus0
                  uhub0: 8 ports with 8 removable, self powered
                  ugen0.2: <vendor 0x8087="">at usbus0
                  uhub1: <vendor 2="" 9="" 0x8087="" product="" 0x07db,="" class="" 0,="" rev="" 2.00="" 0.02,="" addr="">on usbus0
                  uhub1: 4 ports with 4 removable, self powered
                  ugen0.3: <avocent>at usbus0
                  ukbd0: <ep1 interrupt="">on usbus0
                  kbd2 at ukbd0
                  ums0: <ep2 interrupt="">on usbus0
                  ums0: 5 buttons and [XYZ] coordinates ID=1
                  ugen0.4: <vendor 0x0000="">at usbus0
                  uhub2: <vendor 4="" 9="" 0x0000="" product="" 0x0001,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus0
                  uhub2: 4 ports with 3 removable, self powered
                  ugen0.5: <vendor 0x0557="">at usbus0
                  ukbd1: <vendor 0="" 5="" 0x0557="" product="" 0x2419,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">on usbus0
                  kbd3 at ukbd1
                  ums1: <vendor 0="" 5="" 0x0557="" product="" 0x2419,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">on usbus0
                  ums1: 3 buttons and [Z] coordinates ID=0
                  ada0 at ahcich4 bus 0 scbus4 target 0 lun 0
                  ada0: <intel ssdsc2bb080g4="" d2010355="">ATA-8 SATA 3.x device
                  ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
                  ada0: Command Queueing enabled
                  ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
                  SMP: AP CPU #7 Launched!
                  SMP: AP CPU #3 Launched!
                  SMP: AP CPU #1 Launched!
                  SMP: AP CPU #6 Launched!
                  SMP: AP CPU #5 Launched!
                  SMP: AP CPU #2 Launched!
                  SMP: AP CPU #4 Launched!
                  Trying to mount root from ufs:/dev/ada0s1a
                  Configuring crash dumps…
                  Using /dev/ada0s1b for dump device.
                  Mounting filesystems...
                  ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
                              Consider tuning vm.kmem_size and vm.kmem_size_max
                              in /boot/loader.conf.
                  ZFS filesystem version 5
                  ZFS storage pool version 28

                  ___
                  / f
                  / p _                  / Sense
                  _                  / 
                      _                  _/

                  Welcome to pfSense 2.1p1-RELEASE  ...

                  No core dumps found.
                  Creating symlinks......done.
                  External config loader 1.0 is now starting...
                  Launching the init system... done.
                  Initializing............................. done.
                  Starting device manager (devd)...done.
                  Loading configuration......done.
                  Updating configuration...done.
                  Cleaning backup cache............done.
                  Setting up extended sysctls...done.
                  Setting timezone...done.
                  Configuring loopback interface...done.
                  Starting syslog...done.
                  Starting Secure Shell Services...done.
                  Setting up polling defaults...done.
                  Setting up interfaces microcode...done.
                  Configuring loopback interface...done.
                  Creating wireless clone interfaces...done.
                  Configuring LAGG interfaces...done.
                  Configuring VLAN interfaces...done.
                  Configuring QinQ interfaces...done.
                  Configuring WAN interface...done.
                  Configuring LAN interface...done.
                  Configuring OPT1 interface...done.
                  Syncing OpenVPN settings...done.
                  Configuring firewall......done.
                  Starting PFLOG...done.
                  Setting up gateway monitors...done.
                  Synchronizing user settings...done.
                  Starting webConfigurator...done.
                  Configuring CRON...done.
                  Starting DNS forwarder...done.
                  Starting NTP time client...done.
                  Configuring firewall......done.
                  Generating RRD graphs...done.
                  Starting syslog...done.
                  Starting CRON... done.
                  Bootup complete

                  FreeBSD/amd64 (pfSense.localdomain) (console)

                  *** Welcome to pfSense 2.1p1-RELEASE-pfSense (amd64) on pfSense ***

                  WAN (wan)      -> igb0      -> v4: 10.0.1.10/24
                  LAN (lan)      -> igb1      -> v4: 192.168.1.65/24
                  OPT1 (opt1)    -> igb2      -> v4: 172.27.44.45/24

                  1. Logout (SSH only)                  8) Shell
                  2. Assign Interfaces                  9) pfTop
                  3. Set interface(s) IP address      10) Filter Logs
                  4. Reset webConfigurator password    11) Restart webConfigurator
                  5. Reset to factory defaults        12) pfSense Developer Shell
                  6. Reboot system                    13) Upgrade from console
                  7. Halt system                      14) Enable Secure Shell (sshd)
                  8. Ping host                        15) Restore recent configuration

                  Enter an option:</intel></vendor></vendor></vendor></vendor></vendor></ep2></ep1></avocent></vendor></vendor></intel></intel></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></high></serial></isa></pci-isa></ahci></ahci></ahci></ahci></ahci></ahci></ahci></ahci></ehci></ehci></intel(r)></intel(r)></intel(r)></intel(r)></processor></acpi></acpi></serial></acpi></acpi></vga-compatible></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></alaska></software></version></intel ></lahf,prefetch></syscall,nx,rdtscp,lm></sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,movbe,popcnt,tscdlt,aesni,<b30></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></also-redacted></redacted>

                  1 Reply Last reply Reply Quote 0
                  • J
                    jasonlitka
                    last edited by

                    Does the 2.4.0 driver you're using fix the mbuf allocation issue in the current one?

                    I can break anything.

                    1 Reply Last reply Reply Quote 0
                    • ?
                      Guest
                      last edited by

                      I'll just quote myself:

                      "I wouldn't say the port is complete by any stretch (for example, the QuickAssist part isn't working), but there are results."

                      1 Reply Last reply Reply Quote 0
                      • P
                        piotrasd
                        last edited by

                        hi, where we can get this build ?? for i354  ???

                        1 Reply Last reply Reply Quote 0
                        • P
                          peersu
                          last edited by

                          You have to go the VM route with ESX or some other to have supported drivers.  Not in current pfSense build, and I don't think generally available anywhere I can find.

                          1 Reply Last reply Reply Quote 0
                          • ?
                            Guest
                            last edited by

                            @peersu:

                            You have to go the VM route with ESX or some other to have supported drivers.  Not in current pfSense build, and I don't think generally available anywhere I can find.

                            Well, not in a build you have, but still coming.

                            1 Reply Last reply Reply Quote 0
                            • P
                              piotrasd
                              last edited by

                              Hi
                              someone could confirm me if exist any build of pfsense with support Intel i354 ??

                              I want order mainboard Supermicro A1SAi-2750F special for pfSense.
                              There is possibility build pfSense on FreeBSD 10 ? just for get driver working ?

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                There is no public build that will support it currently. As far as I know only the bleeding edge pre-alpha builds of 2.2 (built on FreeBSD 10) will support it and they are not available for good reason, they are not functional in many areas as of the last report.
                                It's not possible to to just build ontop of FreeBSD 10 either, all the current development effort is to get this working.

                                That said it's not necessary to use the complete FreeBSD code base to get drivers. If the newer igb driver, with i354 support, becomes available as a backport it would be possible to load it under 2.1.

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • ?
                                  Guest
                                  last edited by

                                  how many times do I have to explain that we have backported the driver from 10?

                                  no, it's not available (yet).

                                  1 Reply Last reply Reply Quote 0
                                  • X
                                    xparanoik
                                    last edited by

                                    Any updates on this topic?

                                    1 Reply Last reply Reply Quote 0
                                    • ?
                                      Guest
                                      last edited by

                                      https://forum.pfsense.org/index.php?topic=70400.msg402623#msg402623

                                      1 Reply Last reply Reply Quote 0
                                      • First post
                                        Last post
                                      Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.