Intel i354 support in 2.1

Guest

Looking forward to the update… I just bought the SuperMicro Rangeley 1U kit, and would love to get pfSense working on it

This is the same Supermicro hardware (maybe your ram and disk are different).

I wouldn't say the port is complete by any stretch (for example, the QuickAssist part isn't working), but there are results 8) :

enjoy! :D

KDB: debugger backends: ddb 1
KDB: current backend: ddb
Copyright 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p12 #0: Thu Dec 5 16:03:14 EST 2013
root@rebrand-dedicated-<redacted>-8.3-amd64.builders.pfsense.org:/usr/obj.<also-redacted>/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU @ 2.40GHz (2400.10-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x406d8 Family = 6 Model = 4d Stepping = 8
Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x43d8e3bf<sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,movbe,popcnt,tscdlt,aesni,<b30>>
AMD Features=0x28100800 <syscall,nx,rdtscp,lm>AMD Features2=0x101 <lahf,prefetch>TSC: P-state invariant
real memory = 8589934592 (8192 MB)
avail memory = 8203595776 (7823 MB)
ACPI APIC Table: <intel tiano ="">FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
cpu4 (AP): APIC ID: 8
cpu5 (AP): APIC ID: 10
cpu6 (AP): APIC ID: 12
cpu7 (AP): APIC ID: 14
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20101013/tbfadt-392)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20101013/tbfadt-707)
ioapic0 <version 2.0="">irqs 0-23 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff804aa8d0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff804aa970, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff804aaa10, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0: <alaska a="" m="" i="">on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <acpi cpu="">on acpi0
cpu1: <acpi cpu="">on acpi0
cpu2: <acpi cpu="">on acpi0
cpu3: <acpi cpu="">on acpi0
cpu4: <acpi cpu="">on acpi0
cpu5: <acpi cpu="">on acpi0
cpu6: <acpi cpu="">on acpi0
cpu7: <acpi cpu="">on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus="">on pcib0
pcib1: <acpi pci-pci="" bridge="">mem 0xdf2e0000-0xdf2fffff irq 16 at device 1.0 on pci0
pci1: <acpi pci="" bus="">on pcib1
pcib2: <acpi pci-pci="" bridge="">at device 0.0 on pci1
pci2: <acpi pci="" bus="">on pcib2
vgapci0: <vga-compatible display="">port 0xd000-0xd07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 16 at device 0.0 on pci2
pcib3: <acpi pci-pci="" bridge="">mem 0xdf2c0000-0xdf2dffff irq 16 at device 2.0 on pci0
pci3: <acpi pci="" bus="">on pcib3
pci3: <serial bus,="" usb="">at device 0.0 (no driver attached)
pcib4: <acpi pci-pci="" bridge="">mem 0xdf2a0000-0xdf2bffff irq 20 at device 3.0 on pci0
pci4: <acpi pci="" bus="">on pcib4
pci0: <processor>at device 11.0 (no driver attached)
pci0: <base peripheral=""> at device 15.0 (no driver attached)
pci0: <base peripheral=""> at device 19.0 (no driver attached)
igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0xe0c0-0xe0df mem 0xdf260000-0xdf27ffff,0xdf30c000-0xdf30ffff irq 20 at device 20.0 on pci0
igb0: Using MSIX interrupts with 9 vectors
igb0: [ITHREAD]
igb0: Bound queue 0 to cpu 0
igb0: [ITHREAD]
igb0: Bound queue 1 to cpu 1
igb0: [ITHREAD]
igb0: Bound queue 2 to cpu 2
igb0: [ITHREAD]
igb0: Bound queue 3 to cpu 3
igb0: [ITHREAD]
igb0: Bound queue 4 to cpu 4
igb0: [ITHREAD]
igb0: Bound queue 5 to cpu 5
igb0: [ITHREAD]
igb0: Bound queue 6 to cpu 6
igb0: [ITHREAD]
igb0: Bound queue 7 to cpu 7
igb0: [ITHREAD]
igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0xe0a0-0xe0bf mem 0xdf240000-0xdf25ffff,0xdf308000-0xdf30bfff irq 21 at device 20.1 on pci0
igb1: Using MSIX interrupts with 9 vectors
igb1: [ITHREAD]
igb1: Bound queue 0 to cpu 0
igb1: [ITHREAD]
igb1: Bound queue 1 to cpu 1
igb1: [ITHREAD]
igb1: Bound queue 2 to cpu 2
igb1: [ITHREAD]
igb1: Bound queue 3 to cpu 3
igb1: [ITHREAD]
igb1: Bound queue 4 to cpu 4
igb1: [ITHREAD]
igb1: Bound queue 5 to cpu 5
igb1: [ITHREAD]
igb1: Bound queue 6 to cpu 6
igb1: [ITHREAD]
igb1: Bound queue 7 to cpu 7
igb1: [ITHREAD]
igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0xe080-0xe09f mem 0xdf220000-0xdf23ffff,0xdf304000-0xdf307fff irq 22 at device 20.2 on pci0
igb2: Using MSIX interrupts with 9 vectors
igb2: [ITHREAD]
igb2: Bound queue 0 to cpu 0
igb2: [ITHREAD]
igb2: Bound queue 1 to cpu 1
igb2: [ITHREAD]
igb2: Bound queue 2 to cpu 2
igb2: [ITHREAD]
igb2: Bound queue 3 to cpu 3
igb2: [ITHREAD]
igb2: Bound queue 4 to cpu 4
igb2: [ITHREAD]
igb2: Bound queue 5 to cpu 5
igb2: [ITHREAD]
igb2: Bound queue 6 to cpu 6
igb2: [ITHREAD]
igb2: Bound queue 7 to cpu 7
igb2: [ITHREAD]
igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0xe060-0xe07f mem 0xdf200000-0xdf21ffff,0xdf300000-0xdf303fff irq 23 at device 20.3 on pci0
igb3: Using MSIX interrupts with 9 vectors
igb3: [ITHREAD]
igb3: Bound queue 0 to cpu 0
igb3: [ITHREAD]
igb3: Bound queue 1 to cpu 1
igb3: [ITHREAD]
igb3: Bound queue 2 to cpu 2
igb3: [ITHREAD]
igb3: Bound queue 3 to cpu 3
igb3: [ITHREAD]
igb3: Bound queue 4 to cpu 4
igb3: [ITHREAD]
igb3: Bound queue 5 to cpu 5
igb3: [ITHREAD]
igb3: Bound queue 6 to cpu 6
igb3: [ITHREAD]
igb3: Bound queue 7 to cpu 7
igb3: [ITHREAD]
ehci0: <ehci (generic)="" usb="" 2.0="" controller="">mem 0xdf317000-0xdf3173ff irq 23 at device 22.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <ehci (generic)="" usb="" 2.0="" controller="">on ehci0
ahci0: <ahci sata="" controller="">port 0xe150-0xe157,0xe140-0xe143,0xe130-0xe137,0xe120-0xe123,0xe040-0xe05f mem 0xdf316000-0xdf3167ff irq 19 at device 23.0 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <ahci channel="">at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <ahci channel="">at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <ahci channel="">at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <ahci channel="">at channel 3 on ahci0
ahcich3: [ITHREAD]
ahci1: <ahci sata="" controller="">port 0xe110-0xe117,0xe100-0xe103,0xe0f0-0xe0f7,0xe0e0-0xe0e3,0xe020-0xe03f mem 0xdf315000-0xdf3157ff irq 19 at device 24.0 on pci0
ahci1: [ITHREAD]
ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
ahcich4: <ahci channel="">at channel 0 on ahci1
ahcich4: [ITHREAD]
ahcich5: <ahci channel="">at channel 1 on ahci1
ahcich5: [ITHREAD]
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
acpi_hpet0: <high precision="" event="" timer="">on acpi0
device_attach: acpi_hpet0 attach returned 12
atrtc0: <at realtime="" clock="">port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
sc0: <system console="">at flags 0x100 on isa0
sc0: CGA <16 virtual consoles, flags=0x300>
vga0: <generic isa="" vga="">at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
atkbd: unable to get the current command byte value.
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to get the current command byte value.
ppc0: cannot reserve I/O port range
est0: <enhanced speedstep="" frequency="" control="">on cpu0
p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
est1: <enhanced speedstep="" frequency="" control="">on cpu1
p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
est2: <enhanced speedstep="" frequency="" control="">on cpu2
p4tcc2: <cpu frequency="" thermal="" control="">on cpu2
est3: <enhanced speedstep="" frequency="" control="">on cpu3
p4tcc3: <cpu frequency="" thermal="" control="">on cpu3
est4: <enhanced speedstep="" frequency="" control="">on cpu4
p4tcc4: <cpu frequency="" thermal="" control="">on cpu4
est5: <enhanced speedstep="" frequency="" control="">on cpu5
p4tcc5: <cpu frequency="" thermal="" control="">on cpu5
est6: <enhanced speedstep="" frequency="" control="">on cpu6
p4tcc6: <cpu frequency="" thermal="" control="">on cpu6
est7: <enhanced speedstep="" frequency="" control="">on cpu7
p4tcc7: <cpu frequency="" thermal="" control="">on cpu7
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <intel>at usbus0
uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus0
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <vendor 0x8087="">at usbus0
uhub1: <vendor 2="" 9="" 0x8087="" product="" 0x07db,="" class="" 0,="" rev="" 2.00="" 0.02,="" addr="">on usbus0
uhub1: 4 ports with 4 removable, self powered
ugen0.3: <avocent>at usbus0
ukbd0: <ep1 interrupt="">on usbus0
kbd2 at ukbd0
ums0: <ep2 interrupt="">on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=1
ugen0.4: <vendor 0x0000="">at usbus0
uhub2: <vendor 4="" 9="" 0x0000="" product="" 0x0001,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus0
uhub2: 4 ports with 3 removable, self powered
ugen0.5: <vendor 0x0557="">at usbus0
ukbd1: <vendor 0="" 5="" 0x0557="" product="" 0x2419,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">on usbus0
kbd3 at ukbd1
ums1: <vendor 0="" 5="" 0x0557="" product="" 0x2419,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">on usbus0
ums1: 3 buttons and [Z] coordinates ID=0
ada0 at ahcich4 bus 0 scbus4 target 0 lun 0
ada0: <intel ssdsc2bb080g4="" d2010355="">ATA-8 SATA 3.x device
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
Trying to mount root from ufs:/dev/ada0s1a
Configuring crash dumps…
Using /dev/ada0s1b for dump device.
Mounting filesystems...
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
Consider tuning vm.kmem_size and vm.kmem_size_max
in /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28

___
/ f
/ p _/ Sense
_/
__/

Welcome to pfSense 2.1p1-RELEASE ...

No core dumps found.
Creating symlinks......done.
External config loader 1.0 is now starting...
Launching the init system... done.
Initializing............................. done.
Starting device manager (devd)...done.
Loading configuration......done.
Updating configuration...done.
Cleaning backup cache............done.
Setting up extended sysctls...done.
Setting timezone...done.
Configuring loopback interface...done.
Starting syslog...done.
Starting Secure Shell Services...done.
Setting up polling defaults...done.
Setting up interfaces microcode...done.
Configuring loopback interface...done.
Creating wireless clone interfaces...done.
Configuring LAGG interfaces...done.
Configuring VLAN interfaces...done.
Configuring QinQ interfaces...done.
Configuring WAN interface...done.
Configuring LAN interface...done.
Configuring OPT1 interface...done.
Syncing OpenVPN settings...done.
Configuring firewall......done.
Starting PFLOG...done.
Setting up gateway monitors...done.
Synchronizing user settings...done.
Starting webConfigurator...done.
Configuring CRON...done.
Starting DNS forwarder...done.
Starting NTP time client...done.
Configuring firewall......done.
Generating RRD graphs...done.
Starting syslog...done.
Starting CRON... done.
Bootup complete

FreeBSD/amd64 (pfSense.localdomain) (console)

*** Welcome to pfSense 2.1p1-RELEASE-pfSense (amd64) on pfSense ***

WAN (wan) -> igb0 -> v4: 10.0.1.10/24
LAN (lan) -> igb1 -> v4: 192.168.1.65/24
OPT1 (opt1) -> igb2 -> v4: 172.27.44.45/24

Logout (SSH only) 8) Shell
Assign Interfaces 9) pfTop
Set interface(s) IP address 10) Filter Logs
Reset webConfigurator password 11) Restart webConfigurator
Reset to factory defaults 12) pfSense Developer Shell
Reboot system 13) Upgrade from console
Halt system 14) Enable Secure Shell (sshd)
Ping host 15) Restore recent configuration

Enter an option:</intel></vendor></vendor></vendor></vendor></vendor></ep2></ep1></avocent></vendor></vendor></intel></intel></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></high></serial></isa></pci-isa></ahci></ahci></ahci></ahci></ahci></ahci></ahci></ahci></ehci></ehci></intel(r)></intel(r)></intel(r)></intel(r)></processor></acpi></acpi></serial></acpi></acpi></vga-compatible></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></alaska></software></version></intel ></lahf,prefetch></syscall,nx,rdtscp,lm></sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,movbe,popcnt,tscdlt,aesni,<b30></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></also-redacted></redacted>

jasonlitka

Does the 2.4.0 driver you're using fix the mbuf allocation issue in the current one?

Guest

I'll just quote myself:

"I wouldn't say the port is complete by any stretch (for example, the QuickAssist part isn't working), but there are results."

piotrasd

hi, where we can get this build ?? for i354 ???

peersu

You have to go the VM route with ESX or some other to have supported drivers. Not in current pfSense build, and I don't think generally available anywhere I can find.

Guest

@peersu:

You have to go the VM route with ESX or some other to have supported drivers. Not in current pfSense build, and I don't think generally available anywhere I can find.

Well, not in a build you have, but still coming.

piotrasd

Hi
someone could confirm me if exist any build of pfsense with support Intel i354 ??

I want order mainboard Supermicro A1SAi-2750F special for pfSense.
There is possibility build pfSense on FreeBSD 10 ? just for get driver working ?

stephenw10

There is no public build that will support it currently. As far as I know only the bleeding edge pre-alpha builds of 2.2 (built on FreeBSD 10) will support it and they are not available for good reason, they are not functional in many areas as of the last report.
It's not possible to to just build ontop of FreeBSD 10 either, all the current development effort is to get this working.

That said it's not necessary to use the complete FreeBSD code base to get drivers. If the newer igb driver, with i354 support, becomes available as a backport it would be possible to load it under 2.1.

Steve

Guest

how many times do I have to explain that we have backported the driver from 10?

no, it's not available (yet).

xparanoik

Any updates on this topic?

Guest

https://forum.pfsense.org/index.php?topic=70400.msg402623#msg402623