New package Apcupsd is available.
-
Hi guys.
New package Apcupsd is available for 2.0.X and 2.1 (i386/amd64).
Screen shots:
Any problems, let me know.
Best regards.
-
Any problems, let me know.
I've just switched back to a hardware firewall from a VM, and have tried setting up my old APC smartups 620 again. This used to work in the past, but for the life of me I can't get the config right.
Here's what syslog is saying when I set up apcupsd
Dec 28 23:08:31 pfsense apcupsd[84527]: apcupsd exiting, signal 15
Dec 28 23:08:31 pfsense apcupsd[84527]: Lock file data error: X���^?
Dec 28 23:08:31 pfsense apcupsd[84527]: Lock file data error: '�
Dec 28 23:08:31 pfsense apcupsd[84527]: apcupsd shutdown succeeded
Dec 28 23:08:36 pfsense apcupsd[85926]: Lock file data error: X���^?
Dec 28 23:08:36 pfsense apcupsd[85926]: apcupsd FATAL ERROR in apcupsd.c at line 285 Failed to acquire device lock file
Dec 28 23:08:36 pfsense apcupsd[85926]: Lock file data error: M-^@�
Dec 28 23:08:36 pfsense apcupsd[85926]: apcupsd error shutdown completedI'm positive my serial cable is a 940-0095B because that what worked before.
It is into a physical serial port, but what is the port called? I used to use "/dev/cuau0" but that was through a serial/USB adapter. ttyv0 and ttyu0 don't work.
I do not have console enabled on the serial port, however I do have /dev/ttyu0.lock with a filetime of when the box was powered on.
Any ideas? -
Thanks.
I know the NUT package has been around for quite a long time but I've been using apcupsd in a Windows VM for a couple of years. This package is just what I need in a similar build I'm doing for a friend, provided I can figure out the script to execute on low battery.
-
I've just switched back to a hardware firewall from a VM, and have tried setting up my old APC smartups 620 again. This used to work in the past, but for the life of me I can't get the config right.
Hi.
Could you try this config:UPS CABLE: 940-0095A
UPS TYPE / Device: apcsmart /dev/cuau0 -
Thanks.
I know the NUT package has been around for quite a long time but I've been using apcupsd in a Windows VM for a couple of years. This package is just what I need in a similar build I'm doing for a friend, provided I can figure out the script to execute on low battery.
Soon, I want make an improvement for let you change these scripts:
killpower)
commfailure)
commok)
powerout)
onbattery)
offbattery)
mainsback)
failing)
timeout)
loadlimit)
runlimit)
doreboot)
doshutdown)
annoyme)
emergency)
changeme)
remotedown)
startselftest)
endselftest)
battdetach)
battattach)For now, you need to change manually or create your script on pfSense box.
Example for pfSense 2.1 amd64:
create the script:
touch /usr/pbi/apcupsd-amd64/etc/apcupsd/doshutdownedit it:
vi /usr/pbi/apcupsd-amd64/etc/apcupsd/doshutdownchange the permissions:
chmod +x /usr/pbi/apcupsd-amd64/etc/apcupsd/doshutdowncreate a symbolic link:
ln -s /usr/pbi/apcupsd-amd64/etc/apcupsd/doshutdown /usr/local/etc/apcupsd/Thanks
-
G'day Danilo ;D
Could I ask a question? I have an APC-UPS (SmartUPS 1000), which connects to a Synology NAS via a USB-cable which has some (I don't know which one yet, but Synology runs Linux) UPS-server running. So the APC-UPS sends a signal to the Synology when there is a power problem, after which the Synology can shut down itself and the other Synology NAS-ses I have via LAN. Would your package be able to act as a slave towards the Synology also? As in:
APC-UPS: power problem signal to Synology NAS 1
–----------> Synology NAS 1 (UPS server monitoring software)
-------------------------------> signal to other Synologies: shutdown
-------------------------------> signal to pfSense: shutdownIf so, what would be the settings in your package to accomplish this? I have been poking around, but to be honest: I have no clue :-[
Thank you in advance for your answer ;D
Bye,
-
@Hollander:
G'day Danilo ;D
Could I ask a question? I have an APC-UPS (SmartUPS 1000), which connects to a Synology NAS via a USB-cable which has some (I don't know which one yet, but Synology runs Linux) UPS-server running. So the APC-UPS sends a signal to the Synology when there is a power problem, after which the Synology can shut down itself and the other Synology NAS-ses I have via LAN. Would your package be able to act as a slave towards the Synology also? As in:
APC-UPS: power problem signal to Synology NAS 1
–----------> Synology NAS 1 (UPS server monitoring software)
-------------------------------> signal to other Synologies: shutdown
-------------------------------> signal to pfSense: shutdownHi Hollander.
searching on google, looks like you can install apcupsd on synology, but seems that you need to make some modifications. (I can't help you with that ).
If you can run apcupsd on synology, then you can integrate with others systems running apcupsd.
Sorry for not helping too much.
-
Could you try this config:
UPS CABLE: 940-0095A
UPS TYPE / Device: apcsmart /dev/cuau0Same kind of thing again
Jan 3 21:18:27 pfsense apcupsd[27864]: Lock file data error: X<ec><ff><ff><ff>^?
Jan 3 21:18:27 pfsense apcupsd[27864]: apcupsd FATAL ERROR in apcupsd.c at line 285 Failed to acquire device lock file
Jan 3 21:18:27 pfsense apcupsd[27864]: Lock file data error: M-^@ <da><fd>Jan 3 21:18:27 pfsense apcupsd[27864]: apcupsd error shutdown completed[2.1-RELEASE][root@pfsense.criggie.org.nz]/root(10): ls -la /dev/cuau0*
crw-rw–-- 1 root dialer 0, 40 Dec 28 23:16 /dev/cuau0
crw-rw---- 1 uucp dialer 0, 41 Dec 28 22:06 /dev/cuau0.init
crw-rw---- 1 uucp dialer 0, 42 Dec 28 22:06 /dev/cuau0.lockHow do I find out what's using /dev/cuau0? Normally I'd run fuser or lsof but they're not available.</fd></da></ff></ff></ff></ec>
-
Hi,
Many thanks for the package.
It looks like it has been compiled without snmp support, see below:
php: /pkg_edit.php: The command '/usr/local/etc/rc.d/apcupsd.sh restart' returned exit code '1', the output was 'Stopping APC UPS Daemon… No matching processes were found Starting APC UPS Daemon... apcupsd FATAL ERROR in apcupsd.c at line 259 Apcupsd cannot continue without a valid driver. Apcupsd driver snmplite not found. The available apcupsd drivers are: dumb apcsmart net usb pcnet Most likely, you need to add --enable-snmplite to your ./configure options. '
Can this be changed?
Thanks
Kane
-
@Hollander:
G'day Danilo ;D
Could I ask a question? I have an APC-UPS (SmartUPS 1000), which connects to a Synology NAS via a USB-cable which has some (I don't know which one yet, but Synology runs Linux) UPS-server running. So the APC-UPS sends a signal to the Synology when there is a power problem, after which the Synology can shut down itself and the other Synology NAS-ses I have via LAN. Would your package be able to act as a slave towards the Synology also? As in:
APC-UPS: power problem signal to Synology NAS 1
–----------> Synology NAS 1 (UPS server monitoring software)
-------------------------------> signal to other Synologies: shutdown
-------------------------------> signal to pfSense: shutdownIf so, what would be the settings in your package to accomplish this? I have been poking around, but to be honest: I have no clue :-[
Thank you in advance for your answer ;D
Bye,
[/quote]I have done this with the NUT package. The USB cable from my backups ES700 is connected to a Synology NAS and this NAS acts as a server for my Pfsense box.
Works like a charm:-
On your NAS check shutdown UPS and enable Network UPS Server
-
In Permitted disk stations enter IP adres of your Pfsense box (Lan IP address in most cases)
-
In the NUT package settings set Remote UPS
-
And Remote NUT ups settings set name to "ups", Remote address to you NAS IP, User "monuser" and Password "secret"
Thats all there is. But don't forget that with a power failure your network doesn't have power too, so your switch must be connected to the UPS too (that's what I forgot while testing) :D
-
-
@Hollander:
G'day Danilo ;D
Could I ask a question? I have an APC-UPS (SmartUPS 1000), which connects to a Synology NAS via a USB-cable which has some (I don't know which one yet, but Synology runs Linux) UPS-server running. So the APC-UPS sends a signal to the Synology when there is a power problem, after which the Synology can shut down itself and the other Synology NAS-ses I have via LAN. Would your package be able to act as a slave towards the Synology also? As in:
APC-UPS: power problem signal to Synology NAS 1
–----------> Synology NAS 1 (UPS server monitoring software)
-------------------------------> signal to other Synologies: shutdown
-------------------------------> signal to pfSense: shutdownIf so, what would be the settings in your package to accomplish this? I have been poking around, but to be honest: I have no clue :-[
Thank you in advance for your answer ;D
Bye,
[/quote]I have done this with the NUT package. The USB cable from my backups ES700 is connected to a Synology NAS and this NAS acts as a server for my Pfsense box.
Works like a charm:-
On your NAS check shutdown UPS and enable Network UPS Server
-
In Permitted disk stations enter IP adres of your Pfsense box (Lan IP address in most cases)
-
In the NUT package settings set Remote UPS
-
And Remote NUT ups settings set name to "ups", Remote address to you NAS IP, User "monuser" and Password "secret"
Thats all there is. But don't forget that with a power failure your network doesn't have power too, so your switch must be connected to the UPS too (that's what I forgot while testing) :D
Thank you Gogol for the very clear instructions, very kind of you ;D
Of course, knowing me, it didn't work :-[
( ;D)
I will open a new thread in order not to hijack Danilo's thread. Perhaps you'd be willing to look in that new thread? (I'll post it here once I've created it). EDIT: new thread is here: http://forum.pfsense.org/index.php/topic,71121.msg388428.html#msg388428
Thank you ;D
-
-
The package was updated. (apcupsd-3.14.10_1 pkg v0.2)
-
Fixed snmp.
-
Added device option.
-
Added script to send alerts if you have smtp notifications enabled and mailreport package.
If you use pcnet on the Upstype field, the parameters need to be on same field.
If you use snmp, the parameters need to be on device field. -
-
Hello!
Love the UPS monitoring feature; very nice!
Question/request though - it is possible to get email notifications when the power is cut out?
Thanks!
-
Question/request though - it is possible to get email notifications when the power is cut out?
May I suggest reading the previous post, right above yours?
-
Question/request though - it is possible to get email notifications when the power is cut out?
May I suggest reading the previous post, right above yours?
blind, i am :D
-
So I am hitting a bit of a weird issue…
Upgraded to 2.1.2 and all was well; apcupsd worked fine with my USB based APC UPS.
Then all of the sudden, I started getting the operation timed out error when clicking on the status tab. Checking the logs, I see this:
2014-04-10 21:21:48 -0700 Lock file data error: Xìÿÿÿ^? 2014-04-10 21:21:48 -0700 apcupsd FATAL ERROR in apcupsd.c at line 285 Failed to acquire device lock file 2014-04-10 21:21:48 -0700 Lock file data error: Ø^ËB 2014-04-10 21:21:48 -0700 apcupsd error shutdown completed
Tried restarting the service, reinstalling, rebooting, removing, rebooting, reinstalling… no dice.
Then, I just put a random string in the 'Device' field (the one right above 'Poll Time') - not to confuse with 'USB Type / Device' field which shows "usb BLANK"
Now I see this:
2014-04-10 21:27:50 -0700 apcupsd FATAL ERROR in generic-usb.c at line 674 Cannot find UPS device -- For a link to detailed USB trouble shooting information, please see <http: www.apcupsd.com="" support.html="">. 2014-04-10 21:27:50 -0700 apcupsd error shutdown completed</http:>
For testing sake - I installed NUT and it seems to be working just fine.
So, any ideas of why apcupsd ceased to work? :(
-
Before, We had just one field to be filled: UPS Type / Device.
Now, We have Device field separated.For pcnet config, parameters need to be just on UPS Type field.
With snmp, the parameters need to be on device field.How was your config before the upgrade?
-
Hello!
Love the UPS monitoring feature; very nice!
Question/request though - it is possible to get email notifications when the power is cut out?
Thanks!
Hi.
You need to configure smtp email notifications on pfSense and install mailreport package (just install it).
After that, apcupsd will send email alerts to you. -
Before, We had just one field to be filled: UPS Type / Device.
Now, We have Device field separated.For pcnet config, parameters need to be just on UPS Type field.
With snmp, the parameters need to be on device field.How was your config before the upgrade?
Config was as attached (of course service was enabled; I disabled it for now since I am using NUT). All other settings are left at default.
![Screen Shot 2014-04-11 at 9.28.52 AM.png_thumb](/public/imported_attachments/1/Screen Shot 2014-04-11 at 9.28.52 AM.png_thumb)
![Screen Shot 2014-04-11 at 9.28.52 AM.png](/public/imported_attachments/1/Screen Shot 2014-04-11 at 9.28.52 AM.png) -
Config was as attached (of course service was enabled; I disabled it for now since I am using NUT). All other settings are left at default.
When you have a chance, on UPSType / Device put just "usb" and try again.
-
Config was as attached (of course service was enabled; I disabled it for now since I am using NUT). All other settings are left at default.
When you have a chance, on UPSType / Device put just "usb" and try again.
Unfortunately that did not help :\ still have the same problem:
2014-04-11 13:58:04 -0700 Lock file data error: X���� 2014-04-11 13:58:04 -0700 apcupsd FATAL ERROR in apcupsd.c at line 285 Failed to acquire device lock file 2014-04-11 13:58:04 -0700 Lock file data error: ؋B 2014-04-11 13:58:04 -0700 apcupsd error shutdown completed
-
Could you collect all the log?
On Diagnostics –> Command Prompt
cat /var/log/apcupsd.events
Use a pastebin like pastebin.ca
Thank you.
Config was as attached (of course service was enabled; I disabled it for now since I am using NUT). All other settings are left at default.
When you have a chance, on UPSType / Device put just "usb" and try again.
Unfortunately that did not help :\ still have the same problem:
2014-04-11 13:58:04 -0700 Lock file data error: X���� 2014-04-11 13:58:04 -0700 apcupsd FATAL ERROR in apcupsd.c at line 285 Failed to acquire device lock file 2014-04-11 13:58:04 -0700 Lock file data error: ؋B 2014-04-11 13:58:04 -0700 apcupsd error shutdown completed
-
Could you collect the log?
On Diagnostics –> Command Prompt
cat /var/log/apcupsd.events
Use a pastebin like pastebin.ca
Thank you.
Config was as attached (of course service was enabled; I disabled it for now since I am using NUT). All other settings are left at default.
When you have a chance, on UPSType / Device put just "usb" and try again.
Unfortunately that did not help :\ still have the same problem:
2014-04-11 13:58:04 -0700 Lock file data error: X���� 2014-04-11 13:58:04 -0700 apcupsd FATAL ERROR in apcupsd.c at line 285 Failed to acquire device lock file 2014-04-11 13:58:04 -0700 Lock file data error: ؋B 2014-04-11 13:58:04 -0700 apcupsd error shutdown completed
Log here:
http://pastebin.com/9e347baC
The log is as-of yesterday.
-
Thanks for the log.
Could you check what is on this directory?
ls -lha /var/spool/lock/
Log here:
http://pastebin.com/9e347baC
The log is as-of yesterday.
-
Also, this file exists?
/var/run/apcupsd.pid
Thanks for the log.
Could you check what is on this directory?
ls -lha /var/spool/lock/
Log here:
http://pastebin.com/9e347baC
The log is as-of yesterday.
-
Also, this file exists?
/var/run/apcupsd.pid
Thanks for the log.
Could you check what is on this directory?
ls -lha /var/spool/lock/
Log here:
http://pastebin.com/9e347baC
The log is as-of yesterday.
I enabled the service and checked /var/spool/lock - nothing there except LCK..:
[2.1.2-RELEASE][root@pfsense]/var/spool/lock(8): ls -la total 4 drwxrwxr-x 2 uucp dialer 512 Apr 10 21:37 . drwxr-xr-x 8 root wheel 512 Apr 10 23:37 .. -rw-r--r-- 1 root dialer 0 Apr 10 19:46 LCK..
In /var/run - apcupsd.pid does not exist :\
-
remove this LCK and restart the service, please
I enabled the service and checked /var/spool/lock - nothing there except LCK..:
[2.1.2-RELEASE][root@pfsense]/var/spool/lock(8): ls -la total 4 drwxrwxr-x 2 uucp dialer 512 Apr 10 21:37 . drwxr-xr-x 8 root wheel 512 Apr 10 23:37 .. -rw-r--r-- 1 root dialer 0 Apr 10 19:46 LCK..
In /var/run - apcupsd.pid does not exist :\
-
remove this LCK and restart the service, please
I enabled the service and checked /var/spool/lock - nothing there except LCK..:
[2.1.2-RELEASE][root@pfsense]/var/spool/lock(8): ls -la total 4 drwxrwxr-x 2 uucp dialer 512 Apr 10 21:37 . drwxr-xr-x 8 root wheel 512 Apr 10 23:37 .. -rw-r--r-- 1 root dialer 0 Apr 10 19:46 LCK..
In /var/run - apcupsd.pid does not exist :\
Yup! That did it!
Thanks!!!
Now - the email functionality; I presume there's nothing to modify or change, right? Once it goes on battery power - an email is automatically dispatched?
-
Yup! That did it!
Thanks!!!
Now - the email functionality; I presume there's nothing to modify or change, right? Once it goes on battery power - an email is automatically dispatched?
Thank you McFuzz.
I will update the package for fix this problem.
About notifications.
Config:
System -> Advanced -> Notifications –> SMTP E-MailInstall:
mailgraph packageAnd then, you can test apcupsd e-mail notifications:
/usr/pbi/apcupsd-i386/etc/apcupsd/onbattery
/usr/pbi/apcupsd-i386/etc/apcupsd/offbatteryor
/usr/pbi/apcupsd-amd64/etc/apcupsd/onbattery
/usr/pbi/apcupsd-amd64/etc/apcupsd/offbatteryBest Regards.
-
https://forum.pfsense.org/index.php?topic=91783
Sent you a PM about this. I am having the same issue now where multiple instances of it get ran.
-
https://forum.pfsense.org/index.php?topic=91783
Sent you a PM about this. I am having the same issue now where multiple instances of it get ran.
Ok thanks.
I've sent a PR for adding apcupsd on pfSense 2.3.
https://github.com/pfsense/FreeBSD-ports/pull/128
On pfSense 2.3 the problem with emails won't happening. ;D
-
Rockin…I am thinking I will have to install it.
-
Are there plans to make Apcupsd available for PfSense 2.3.x ?
Sorry, forget my question above. I overlooked that you are already working on that. Great!
Greetings
flu -
Just posting to show interest.. Used this on a older install, immediately went to look for it on this new install and was sad when I didn't see it..
Appreciate your work on this.
-
How to install apcupsd on pfSense 2.3.2 ???
This package is not available in the "Package Manager" :-[ -
How to install apcupsd on pfSense 2.3.2 ???
This package is not available in the "Package Manager" :-[
[/quote]I think it will be available soon.
A developer was assigned to the PR:
https://github.com/pfsense/FreeBSD-ports/pull/128 -
But… should be "merged it only for 2.3.3-snapshots"? (https://github.com/pfsense/FreeBSD-ports/pull/128)
I'm on 2.3.3 but apcupsd isn't listed on packages page.
There is a way to get the pkg…? -
But… should be "merged it only for 2.3.3-snapshots"? (https://github.com/pfsense/FreeBSD-ports/pull/128)
I'm on 2.3.3 but apcupsd isn't listed on packages page.
There is a way to get the pkg…?I've sent a message to the devs about this.
I think it will be available very soon. -
apcupsd is now published! :)
Service starts and on "Status information" I can see UPS parameters.
But in system logs:Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided Aug 10 09:35:18 apcupsd 58288 apcupsd FATAL ERROR in newups.c at line 103 Mutex lock failure. ERR=Resource deadlock avoided
My system:
pfsense 2.3.3-DEVELOPMENT (amd64) built on Tue Aug 09 21:57:46 CDT 2016
ups APC sua1000i controlled via network card AP9630 -
But… should be "merged it only for 2.3.3-snapshots"? (https://github.com/pfsense/FreeBSD-ports/pull/128)
I'm on 2.3.3 but apcupsd isn't listed on packages page.
There is a way to get the pkg…?I've sent a message to the devs about this.
I think it will be available very soon.And it is available now. ;D