NAT Through Multi-WAN on pfSense
-
.90 is the IP of DVR.
You just invented that 155.102.xxx.90 IP, or??? Once again, this is not what you normally use on LANs (see RFC1918). You will never reach your DVR from outside unless you are
NetRange: 155.102.0.0 - 155.102.255.255 CIDR: 155.102.0.0/16 OriginAS: NetName: ERIM NetHandle: NET-155-102-0-0-1 Parent: NET-155-0-0-0-0 NetType: Direct Assignment RegDate: 1991-11-01 Updated: 2012-03-02 Ref: http://whois.arin.net/rest/net/NET-155-102-0-0-1 OrgName: Altarum Institute OrgId: ALTARU-1 Address: 3520 Green Court City: Ann Arbor StateProv: MI PostalCode: 48105 Country: US RegDate: 2002-08-22 Updated: 2008-08-28 Ref: http://whois.arin.net/rest/org/ALTARU-1 -
No, i didn't, i know the RFC1918 and the rules.
I got this network completly crappy from an ex-employee, and i'm trying to fix stuffs here. ;) -
Are you really sure about the ports? Because, that's not what I can see in the manual - page 29 (despite my non-existent Portuguese). Also, this config screen from the DVR would help. Other than that, no chance to check with 2.0.3, way too outdated, no such box here.
-
yes, i do.
I saw the manual too, it says that comes with another ports by default, but checking the DVR Config, i saw this three ports setted. I'll try to change it.About the IP Range, was a known issue, i'll see what i can do to fix this in a short time! ;)
Thanks for you attention! ;D
-
I saw the manual too, it says that comes with another ports by default, but checking the DVR Config, i saw this three ports setted. I'll try to change it.
Well it should not matter as long as those are really the ports configured there and as long as you can see them open when checking from outside, like with http://www.canyouseeme.org/
-
Could be an ADSL router related issue?
Would be a good idea put it on a "bridge" mode?
Because sometimes looks like pfSense doesnt receive the packages to delivery to DVR. I runned a tcpdump, and i couldnt identify traffic coming from outside to any desired ports. -
Yes, it would be definitely a good idea to put that in bridge mode and configure PPPoE in pfSense – since otherwise the pfSense configuration is pretty much irrelevant, the packets will never arrive there.
-
Ok! I'll try this in the end of this Business Day, and feedback here as soon i have results! :D
-
Solved using "Bridge" mode, thank you! ;)
-
Good. ;)