APU set up with Wi-Fi
-
Thanks for the suggestions.
/var/log has no directory or file names messages?
Just these ones:
/var/log $ ls alternatives.log auth.log.4.gz dpkg.log kern.log.2.gz pm-powersave.log.3.gz teamviewer alternatives.log.1 boot.log dpkg.log.1 kern.log.3.gz pm-powersave.log.4.gz udev alternatives.log.2.gz bootstrap.log dpkg.log.2.gz kern.log.4.gz pycentral.log ufw.log alternatives.log.3.gz btmp dpkg.log.3.gz lastlog samba unattended-upgrades alternatives.log.4.gz btmp.1 dpkg.log.4.gz mail.err speech-dispatcher upstart alternatives.log.5.gz ConsoleKit dpkg.log.5.gz mail.log syslog vbox-install.log apt cups faillog mdm syslog.1 wtmp aptitude dmesg fontconfig.log mintsystem.log syslog.2.gz wtmp.1 aptitude.1.gz dmesg.0 fsck mintUpdate.history syslog.3.gz Xorg.0.log auth.log dmesg.1.gz hp news syslog.4.gz Xorg.0.log.old auth.log.1 dmesg.2.gz installer pm-powersave.log syslog.5.gz Xorg.20.log auth.log.2.gz dmesg.3.gz kern.log pm-powersave.log.1 syslog.6.gz Xorg.20.log.old auth.log.3.gz dmesg.4.gz kern.log.1 pm-powersave.log.2.gz syslog.7.gz -
Try dmesg | grep -i usb
-
Results are:
/var/log $ dmesg | grep -i usb [ 0.116162] ACPI: bus type USB registered [ 0.116175] usbcore: registered new interface driver usbfs [ 0.116181] usbcore: registered new interface driver hub [ 0.116199] usbcore: registered new device driver usb [ 0.554559] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.554638] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.568048] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.568070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.568071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.568073] usb usb1: Product: EHCI Host Controller [ 0.568074] usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd [ 0.568075] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.568145] hub 1-0:1.0: USB hub found [ 0.568273] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.584052] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.584067] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.584069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.584070] usb usb2: Product: EHCI Host Controller [ 0.584072] usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd [ 0.584073] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.584127] hub 2-0:1.0: USB hub found [ 0.584186] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.584191] uhci_hcd: USB Universal Host Controller Interface driver [ 0.584239] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 0.584432] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.584434] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.584435] usb usb3: Product: xHCI Host Controller [ 0.584437] usb usb3: Manufacturer: Linux 3.11.0-12-generic xhci_hcd [ 0.584438] usb usb3: SerialNumber: 0000:04:00.0 [ 0.584492] hub 3-0:1.0: USB hub found [ 0.584545] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 0.584564] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.584566] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.584567] usb usb4: Product: xHCI Host Controller [ 0.584568] usb usb4: Manufacturer: Linux 3.11.0-12-generic xhci_hcd [ 0.584570] usb usb4: SerialNumber: 0000:04:00.0 [ 0.584618] hub 4-0:1.0: USB hub found [ 0.882942] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.024631] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.024636] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.024905] hub 1-1:1.0: USB hub found [ 1.136210] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.268694] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.268699] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.268976] hub 2-1:1.0: USB hub found [ 1.340309] usb 1-1.6: new low-speed USB device number 3 using ehci-pci [ 1.436570] usb 1-1.6: New USB device found, idVendor=04f3, idProduct=0230 [ 1.436572] usb 1-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.436573] usb 1-1.6: Product: USB+PS/2 Optical Mouse [ 1.539296] usbcore: registered new interface driver usbhid [ 1.539298] usbhid: USB HID core driver [ 1.604101] input: USB+PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input3 [ 1.604186] hid-generic 0003:04F3:0230.0001: input,hidraw0: USB HID v1.11 Mouse [USB+PS/2 Optical Mouse] on usb-0000:00:1a.0-1.6/input0 [ 9232.342528] usb 2-1.2: new full-speed USB device number 3 using ehci-pci [ 9232.436085] usb 2-1.2: New USB device found, idVendor=1a86, idProduct=7523 [ 9232.436090] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 9232.436093] usb 2-1.2: Product: USB2.0-Ser! [ 9232.460808] usbcore: registered new interface driver usbserial [ 9232.460826] usbcore: registered new interface driver usbserial_generic [ 9232.460839] usbserial: USB Serial support registered for generic [ 9232.463155] usbcore: registered new interface driver ch341 [ 9232.463175] usbserial: USB Serial support registered for ch341-uart [ 9232.466347] usb 2-1.2: ch341-uart converter now attached to ttyUSB0 [14756.388091] usb 2-1.2: USB disconnect, device number 3 [14756.388293] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0 [14757.476486] usb 1-1.6: USB disconnect, device number 3 [14757.716443] usb 1-1.6: new low-speed USB device number 4 using ehci-pci [14757.812687] usb 1-1.6: New USB device found, idVendor=04f3, idProduct=0230 [14757.812692] usb 1-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [14757.812695] usb 1-1.6: Product: USB+PS/2 Optical Mouse [14757.815407] input: USB+PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11 [14757.815597] hid-generic 0003:04F3:0230.0002: input,hidraw0: USB HID v1.11 Mouse [USB+PS/2 Optical Mouse] on usb-0000:00:1a.0-1.6/input0 [14757.884482] usb 2-1.4: new full-speed USB device number 4 using ehci-pci [14757.977730] usb 2-1.4: New USB device found, idVendor=1a86, idProduct=7523 [14757.977735] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [14757.977739] usb 2-1.4: Product: USB2.0-Ser! [14757.980085] usb 2-1.4: ch341-uart converter now attached to ttyUSB0Maybe the memory card doesn't work?
I think the APU is supposed to have a Compact Flash 4GB card, but I have a MicroSD card 4GB? -
So, just ordered a new Serial female to female adaptor, in case the current serial female to female cable is faulty.
I also removed the APU's microSD 8GB card > placed the microSD 8GB card into the memory card reader > placed the memory card reader into the computer's USB > opened the microSD 8GB card's folder > unzipped pfSense-2.1.2-RELEASE-4g-amd64-nanobsd.img.gz > deleted pfSense-2.1.2-RELEASE-4g-amd64-nanobsd.img.gz > kept the unzipped file pfSense-2.1.2-RELEASE-4g-amd64-nanobsd-20140410-0542.img > ejected the memory card reader > removed the microSD 8GB card from the memory card reader > placed the microSD 8GB card into the APU > powered on the APU > connected the APU into my computer's USB port > the computer is still not recognising any USB from the APU (the computer recognises other USB devices ok).
I also tried the APU USB cable in another computer which recognised no USB when plugged into the 2nd computer.
-
Neither that adapter or the cable you linked to earlier are null-modem cables which is what you need. Something like this:
http://www.ebay.com.au/itm/1-5m-Serial-RS232-Null-Modem-Cable-Female-to-Female-DB9-FTA-DB9F-F-/161195465404?pt=AU_CablesConnectors&hash=item2587ff9abcI assume you're in Australia. :)
Try looking at the syslog in Mint:
cat /var/log/syslog|grep usbor tail it whilst you plug in the cable:
tail -f /var/log/syslogSteve
-
Thank you for the reply.
Forgive my ignorance, but what is the difference between the
null-modem cable and the
serial female to female cable I bought or the
serial female to female adaptor I bought?Not quite sure what I'm looking for with the below commands.
I have included the output if it helps check the USB with the APU cable plugged in.$ cat /var/log/syslog | grep usb May 16 11:20:26 linuxmint-Z68MA-D2H-B3 kernel: [ 9232.342528] usb 2-1.2: new full-speed USB device number 3 using ehci-pci May 16 11:20:26 linuxmint-Z68MA-D2H-B3 kernel: [ 9232.436085] usb 2-1.2: New USB device found, idVendor=1a86, idProduct=7523 May 16 11:20:26 linuxmint-Z68MA-D2H-B3 kernel: [ 9232.436090] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 May 16 11:20:26 linuxmint-Z68MA-D2H-B3 kernel: [ 9232.436093] usb 2-1.2: Product: USB2.0-Ser! May 16 11:20:26 linuxmint-Z68MA-D2H-B3 mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2" May 16 11:20:26 linuxmint-Z68MA-D2H-B3 kernel: [ 9232.460808] usbcore: registered new interface driver usbserial May 16 11:20:26 linuxmint-Z68MA-D2H-B3 kernel: [ 9232.460826] usbcore: registered new interface driver usbserial_generic May 16 11:20:26 linuxmint-Z68MA-D2H-B3 kernel: [ 9232.460839] usbserial: USB Serial support registered for generic May 16 11:20:26 linuxmint-Z68MA-D2H-B3 kernel: [ 9232.463155] usbcore: registered new interface driver ch341 May 16 11:20:26 linuxmint-Z68MA-D2H-B3 kernel: [ 9232.463175] usbserial: USB Serial support registered for ch341-uart May 16 11:20:26 linuxmint-Z68MA-D2H-B3 kernel: [ 9232.466347] usb 2-1.2: ch341-uart converter now attached to ttyUSB0 May 16 12:52:29 linuxmint-Z68MA-D2H-B3 kernel: [14756.388091] usb 2-1.2: USB disconnect, device number 3 May 16 12:52:30 linuxmint-Z68MA-D2H-B3 kernel: [14757.476486] usb 1-1.6: USB disconnect, device number 3 May 16 12:52:30 linuxmint-Z68MA-D2H-B3 kernel: [14757.716443] usb 1-1.6: new low-speed USB device number 4 using ehci-pci May 16 12:52:30 linuxmint-Z68MA-D2H-B3 kernel: [14757.812687] usb 1-1.6: New USB device found, idVendor=04f3, idProduct=0230 May 16 12:52:30 linuxmint-Z68MA-D2H-B3 kernel: [14757.812692] usb 1-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 May 16 12:52:30 linuxmint-Z68MA-D2H-B3 kernel: [14757.812695] usb 1-1.6: Product: USB+PS/2 Optical Mouse May 16 12:52:30 linuxmint-Z68MA-D2H-B3 kernel: [14757.815407] input: USB+PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11 May 16 12:52:30 linuxmint-Z68MA-D2H-B3 kernel: [14757.815597] hid-generic 0003:04F3:0230.0002: input,hidraw0: USB HID v1.11 Mouse [USB+PS/2 Optical Mouse] on usb-0000:00:1a.0-1.6/input0 May 16 12:52:30 linuxmint-Z68MA-D2H-B3 mtp-probe: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6" May 16 12:52:30 linuxmint-Z68MA-D2H-B3 kernel: [14757.884482] usb 2-1.4: new full-speed USB device number 4 using ehci-pci May 16 12:52:30 linuxmint-Z68MA-D2H-B3 kernel: [14757.977730] usb 2-1.4: New USB device found, idVendor=1a86, idProduct=7523 May 16 12:52:30 linuxmint-Z68MA-D2H-B3 kernel: [14757.977735] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 May 16 12:52:30 linuxmint-Z68MA-D2H-B3 kernel: [14757.977739] usb 2-1.4: Product: USB2.0-Ser! May 16 12:52:30 linuxmint-Z68MA-D2H-B3 kernel: [14757.980085] usb 2-1.4: ch341-uart converter now attached to ttyUSB0 May 16 12:52:30 linuxmint-Z68MA-D2H-B3 mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4" May 16 16:08:16 linuxmint-Z68MA-D2H-B3 kernel: [26507.052035] usb 2-1.4: USB disconnect, device number 4 May 16 16:08:17 linuxmint-Z68MA-D2H-B3 kernel: [26507.350341] usb 2-1.4: new full-speed USB device number 5 using ehci-pci May 16 16:08:17 linuxmint-Z68MA-D2H-B3 kernel: [26507.443614] usb 2-1.4: New USB device found, idVendor=1a86, idProduct=7523 May 16 16:08:17 linuxmint-Z68MA-D2H-B3 kernel: [26507.443620] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 May 16 16:08:17 linuxmint-Z68MA-D2H-B3 kernel: [26507.443623] usb 2-1.4: Product: USB2.0-Ser! May 16 16:08:17 linuxmint-Z68MA-D2H-B3 kernel: [26507.445789] usb 2-1.4: ch341-uart converter now attached to ttyUSB0 May 16 16:08:17 linuxmint-Z68MA-D2H-B3 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4" May 16 16:12:47 linuxmint-Z68MA-D2H-B3 kernel: [26778.170560] usb 2-1.2: new high-speed USB device number 6 using ehci-pci May 16 16:12:47 linuxmint-Z68MA-D2H-B3 kernel: [26778.263211] usb 2-1.2: New USB device found, idVendor=1e3d, idProduct=4082 May 16 16:12:47 linuxmint-Z68MA-D2H-B3 kernel: [26778.263216] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=3 May 16 16:12:47 linuxmint-Z68MA-D2H-B3 kernel: [26778.263219] usb 2-1.2: Product: Flash Disk May 16 16:12:47 linuxmint-Z68MA-D2H-B3 kernel: [26778.263222] usb 2-1.2: SerialNumber: 213244704081 May 16 16:12:47 linuxmint-Z68MA-D2H-B3 mtp-probe: checking bus 2, device 6: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2" May 16 16:12:47 linuxmint-Z68MA-D2H-B3 kernel: [26778.285404] usb-storage 2-1.2:1.0: USB Mass Storage device detected May 16 16:12:47 linuxmint-Z68MA-D2H-B3 kernel: [26778.285464] scsi4 : usb-storage 2-1.2:1.0 May 16 16:12:47 linuxmint-Z68MA-D2H-B3 kernel: [26778.285560] usbcore: registered new interface driver usb-storage May 16 16:25:17 linuxmint-Z68MA-D2H-B3 kernel: [27528.501341] usb 2-1.2: USB disconnect, device number 6 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.116191] usbcore: registered new interface driver usbfs May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.116197] usbcore: registered new interface driver hub May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.116215] usbcore: registered new device driver usb May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.568106] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.568108] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.568109] usb usb1: Product: EHCI Host Controller May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.568111] usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.568112] usb usb1: SerialNumber: 0000:00:1a.0 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584106] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584108] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584109] usb usb2: Product: EHCI Host Controller May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584111] usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584112] usb usb2: SerialNumber: 0000:00:1d.0 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584474] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584475] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584476] usb usb3: Product: xHCI Host Controller May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584478] usb usb3: Manufacturer: Linux 3.11.0-12-generic xhci_hcd May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584479] usb usb3: SerialNumber: 0000:04:00.0 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584603] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584605] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584606] usb usb4: Product: xHCI Host Controller May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584608] usb usb4: Manufacturer: Linux 3.11.0-12-generic xhci_hcd May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.584609] usb usb4: SerialNumber: 0000:04:00.0 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 0.882965] usb 1-1: new high-speed USB device number 2 using ehci-pci May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.024644] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.024649] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.136244] usb 2-1: new high-speed USB device number 2 using ehci-pci May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.268708] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.268713] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.340474] usb 1-1.6: new low-speed USB device number 3 using ehci-pci May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.436502] usb 1-1.6: New USB device found, idVendor=04f3, idProduct=0230 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.436507] usb 1-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.436510] usb 1-1.6: Product: USB+PS/2 Optical Mouse May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.540529] usb 2-1.4: new full-speed USB device number 3 using ehci-pci May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.567410] usbcore: registered new interface driver usbhid May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.567412] usbhid: USB HID core driver May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.632907] input: USB+PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input3 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.632972] hid-generic 0003:04F3:0230.0001: input,hidraw0: USB HID v1.11 Mouse [USB+PS/2 Optical Mouse] on usb-0000:00:1a.0-1.6/input0 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.649389] usb 2-1.4: New USB device found, idVendor=1a86, idProduct=7523 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.649391] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 1.649393] usb 2-1.4: Product: USB2.0-Ser! May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 3.553345] usbcore: registered new interface driver usbserial May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 3.553546] usbcore: registered new interface driver usbserial_generic May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 3.553715] usbserial: USB Serial support registered for generic May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 3.556629] usbcore: registered new interface driver ch341 May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 3.556857] usbserial: USB Serial support registered for ch341-uart May 16 16:27:36 linuxmint-Z68MA-D2H-B3 kernel: [ 3.558988] usb 2-1.4: ch341-uart converter now attached to ttyUSB0 May 16 16:45:05 linuxmint-Z68MA-D2H-B3 kernel: [ 1052.238828] usb 2-1.4: USB disconnect, device number 3 May 16 21:04:10 linuxmint-Z68MA-D2H-B3 kernel: [16602.119770] usb 2-1.2: new full-speed USB device number 4 using ehci-pci May 16 21:04:10 linuxmint-Z68MA-D2H-B3 kernel: [16602.213050] usb 2-1.2: New USB device found, idVendor=1a86, idProduct=7523 May 16 21:04:10 linuxmint-Z68MA-D2H-B3 kernel: [16602.213056] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 May 16 21:04:10 linuxmint-Z68MA-D2H-B3 kernel: [16602.213059] usb 2-1.2: Product: USB2.0-Ser! May 16 21:04:10 linuxmint-Z68MA-D2H-B3 mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2" May 16 21:04:10 linuxmint-Z68MA-D2H-B3 kernel: [16602.215761] usb 2-1.2: ch341-uart converter now attached to ttyUSB0$ tail -f /var/log/syslog May 16 20:53:51 linuxmint-Z68MA-D2H-B3 mate-screensaver-dialog: pam_ecryptfs: seteuid error May 16 20:59:16 linuxmint-Z68MA-D2H-B3 mate-screensaver-dialog: pam_ecryptfs: seteuid error May 16 21:04:10 linuxmint-Z68MA-D2H-B3 kernel: [16602.119770] usb 2-1.2: new full-speed USB device number 4 using ehci-pci May 16 21:04:10 linuxmint-Z68MA-D2H-B3 kernel: [16602.213050] usb 2-1.2: New USB device found, idVendor=1a86, idProduct=7523 May 16 21:04:10 linuxmint-Z68MA-D2H-B3 kernel: [16602.213056] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 May 16 21:04:10 linuxmint-Z68MA-D2H-B3 kernel: [16602.213059] usb 2-1.2: Product: USB2.0-Ser! May 16 21:04:10 linuxmint-Z68MA-D2H-B3 kernel: [16602.213465] ch341 2-1.2:1.0: ch341-uart converter detected May 16 21:04:10 linuxmint-Z68MA-D2H-B3 mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2" May 16 21:04:10 linuxmint-Z68MA-D2H-B3 mtp-probe: bus: 2, device: 4 was not an MTP device May 16 21:04:10 linuxmint-Z68MA-D2H-B3 kernel: [16602.215761] usb 2-1.2: ch341-uart converter now attached to ttyUSB0 -
A null-modem cable has the transmit and receive lines crossed such that two machines with standard serial ports can talk to one another. A standard serial cable for connecting a PC to some other serial device does not.
See:
http://en.wikipedia.org/wiki/Null_modemIt looks like your USB-serial adapter was recognised just fine:
May 16 21:04:10 linuxmint-Z68MA-D2H-B3 kernel: [16602.215761] usb 2-1.2: ch341-uart converter now attached to ttyUSB0You should be able to open ttyUSB0 in a serial terminal emulator, like putty. In Xubuntu there is an issue where the user doesn't have permissions to access the serial port and putty gives no helpful errors or log entries. Nice ::). The workaround is to add your user to the modem group. There may be a similar issues in Mint.
Steve
-
Oh, great to see the APU is connecting via the USB port.
So, I've tried a few ways to connect to the serial APU.
Terminal > $ cu -1 /dev/ttyUSB0 -s 19200
cu: /dev/ttyUSB0: System not found$ screen /dev/ttysUSB0 19200
[screen is terminating]
$ screen /dev/ttys0 19200
[screen is terminating]$ minicom
minicom: cannot open /dev/tty8: Permission denied$ sudo mincom
Welcome to minicom 2.6.2OPTIONS: I18n
Compiled on Feb 8 2013, 07:03:03.
Port /dev/tty8, 22:05:36Press CTRL-A Z for help on special keys
$ putty
Serial line: /dev/ttyUSB0 > Speed: 9600 > PuTTY Fatal Error: Unable to open connection to: Unable to open serial port. -
Right so you have the permissions error.
Looks like it's the 'dialout' group you need to be added to. Try doingsudo adduser your_account_name dialoutThen logout and back in again. Try Putty again.
https://bugs.launchpad.net/ubuntu/+source/gtkterm/+bug/949597
Steve
-
Yes, I did the line $ sudo adduser user_name dialout.
Logging gives the same results?
-
Hmm, well that's all that's requiered in Xubuntu but Mint may be different (different versions of Mint too) but usually isn't because they're all Debian based.
You may need to reboot if logging out and back in didn't do it.
You may also need to do:sudo chmod a+rw /dev/ttyUSB0https://fedorahosted.org/fldigi/wiki/Documentation/HOWTO/Serial_Port_Setup
Steve
-
Thanks. Yes, I had actually tried the chmod a+rw /dev/ttyUSB0, but same errors.
I tried:
Terminal > $ putty > Connection type: Serial > Serial line: /dev/ttyUSB0 > Speed: 9600 > Open > Black window opens with the Title /dev/ttyUSB0 - PuTTY and green blinking cursor, but unable to type anything.Terminal > $ putty > Connection type: Serial > Serial line: /dev/ttyUSB0 > Speed: 19200 > Open > Black window opens with the Title /dev/ttyUSB0 - PuTTY and green blinking cursor, but unable to type anything.
Terminal > $ putty > Connection type: Serial > Serial line: /dev/ttyUSB0 > Speed: 38400 > Open > Black window opens with the Title /dev/ttyUSB0 - PuTTY and green blinking cursor, but unable to type anything.
Terminal > $ putty > Connection type: Serial > Serial line: /dev/ttyUSB0 > Speed: 115200 > Open > Black window opens with the Title /dev/ttyUSB0 - PuTTY and green blinking cursor, but unable to type anything.
-
That is the expected behaviour if you're not connected to a serial console. Since your cable is not a null-modem you aren't seeing anything. Putty has a gui you can use to set the serial speed etc.
Steve
-
Okay, I bought a Null Modem cable.
Plugged into APU and USB cable.I tried:
Terminal > $ putty > Connection type: Serial > Serial line: /dev/ttyUSB0 > Speed: 9600 > Open > Black window opens with the Title /dev/ttyUSB0 - PuTTY and green blinking cursor, but unable to type anything.Terminal > $ putty > Connection type: Serial > Serial line: /dev/ttyUSB0 > Speed: 19200 > Open > Black window opens with the Title /dev/ttyUSB0 - PuTTY and green blinking cursor, but unable to type anything.
Terminal > $ putty > Connection type: Serial > Serial line: /dev/ttyUSB0 > Speed: 38400 > Open > Black window opens with the Title /dev/ttyUSB0 - PuTTY and green blinking cursor, but unable to type anything.
Terminal > $ putty > Connection type: Serial > Serial line: /dev/ttyUSB0 > Speed: 115200 > Open > Black window opens with the Title /dev/ttyUSB0 - PuTTY and green blinking cursor, but unable to type anything.
-
Hmm. Well you clearly have some problem there. Do you have anything else you can use to prove the serial terminal with?
Steve
-
I'm trying to think of a way of proving the serial terminal.
All I can think of is
trying another Null modem cable
trying another computer's USB port. (I tried Linux, Mac and Windows).I thought the MicroSD 8GB card might not have the pfSense OS file properly, but I understand this would not effect the serial connection needed to configure the MicroSD 8GB card?
-
One simple way to test basic connectivity is to use a paper clip or short piece of wire to connect the Tx and Rx pins at the end of the null modem cable. Take the end of the null-modem cable (where it connects to the APU) and connect pins 2 and 3. See photo. Now when you open Putty, at any speed, you should see anything you type echoed back to you.
Steve
-
Thanks, that's a handy test to try :-)
I disconnected the Null Modem cable from the APU.
I stuck a paper clip into the Null Modem cable pins 2 and 3.
On my computer > Terminal > $ putty > putty window appears >
Terminal > $ putty > Connection type: Serial > Serial line: /dev/ttyUSB0 > Speed: 9600 > Open > Black window opens with the Title putty and another windows opens with PuTTY Fatal Error. Unable to open connection to : Unable to open serial port.Terminal > $ putty > Connection type: Serial > Serial line: /dev/ttyUSB0 > Speed: 19200 > Open > Black window opens with the Title putty and another windows opens with PuTTY Fatal Error. Unable to open connection to : Unable to open serial port.
Terminal > $ putty > Connection type: Serial > Serial line: /dev/ttyUSB0 > Speed: 38400 > Open > Black window opens with the Title putty and another windows opens with PuTTY Fatal Error. Unable to open connection to : Unable to open serial port.
Terminal > $ putty > Connection type: Serial > Serial line: /dev/ttyUSB0 > Speed: 115200 > Open > Black window opens with the Title putty and another windows opens with PuTTY Fatal Error. Unable to open connection to : Unable to open serial port.
-
That's back to the permissions problem. Try chmodding the port again.
Steve
-
Oops, I had the USB in the 2nd computer.
Now with the USB back in this 1st computer and the paper clip in the Null modem cable pins 2 and 3.
Putty > black screen opens > I can type in the black window > Enter > cursor moves to top left of black screen?Tried Terminal > $ sudo chmod a+rw /dev/ttyUSB0 > Enter > putty > black window and same error of cursor moves to top left of black screen when I type and press Enter.
With the paper clip pulled out of pins 2 and 3, the Putty black window opens, but I can't type.
