PfSense with multiple MPLS sites

The Predator

Hi Guys,

I have a 1 sites that using MPLS network to connect to my PfSense at my office. My problem is I cant access any of my servers that attached with PfSense LAN port.

PfSense Interfaces ;

WAN : myPublicIP
LAN : 172.16.3.0/16
OPT1 : 172.16.5.0/24

MPLS network : (172.16.5.254 - router) / 172.16.5.0/24

MPLS network is connected to OPT1, from MPLS router, I can access my PfSense without any problem. The problem is I can't access all my servers from MPLS network.

My servers ;

Connected to PfSense LAN, example IP address 172.16.3.3 and 172.16.3.10

From my PfSense, I can ping MPLS router without any issue. I have done static route from OPT1 to MPLS router, do a firewall rules for OPT1 to MPLS network.

What setting and configuration need to be done to get my servers will be accessible from MPLS?

Please help.

The Predator

The solution is ;

You need to make and allow the rules for interface OPT1 to LAN interface, set your destination (all MPLS network)
Create a gateway for OPT1 and do a static route for each MPLS network.