PfSense with multiple MPLS sites
-
Hi Guys,
I have a 1 sites that using MPLS network to connect to my PfSense at my office. My problem is I cant access any of my servers that attached with PfSense LAN port.
PfSense Interfaces ;
WAN : myPublicIP
LAN : 172.16.3.0/16
OPT1 : 172.16.5.0/24MPLS network : (172.16.5.254 - router) / 172.16.5.0/24
MPLS network is connected to OPT1, from MPLS router, I can access my PfSense without any problem. The problem is I can't access all my servers from MPLS network.
My servers ;
Connected to PfSense LAN, example IP address 172.16.3.3 and 172.16.3.10
From my PfSense, I can ping MPLS router without any issue. I have done static route from OPT1 to MPLS router, do a firewall rules for OPT1 to MPLS network.
What setting and configuration need to be done to get my servers will be accessible from MPLS?
Please help.
-
The solution is ;
- You need to make and allow the rules for interface OPT1 to LAN interface, set your destination (all MPLS network)
- Create a gateway for OPT1 and do a static route for each MPLS network.