Sarg package for pfsense

peruvichito2014

Gurus
After running this command:

[2.1.3-RELEASE][admin@firewall.hejcu.gob.pe]/root(4): sarg -x
SARG: Init
SARG: Loading configuration from /usr/pbi/sarg-i386/etc/sarg/sarg.conf
SARG: Chaining IP resolving module "dns"
SARG: Loading exclude host file from: /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG: Loading exclude file from: /usr/pbi/sarg-i386/etc/sarg/exclude_users.conf
SARG: Reading host alias file "/usr/pbi/sarg-i386/etc/sarg/hostalias"
SARG: List of host names to alias:
SARG: Deleting temporary directory "/tmp/sarg"
SARG: Parameters:
SARG: Hostname or IP address (-a) =
SARG: Useragent log (-b) =
SARG: Exclude file (-c) = /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG: Date from-until (-d) =
SARG: Email address to send reports (-e) =
SARG: Config file (-f) = /usr/pbi/sarg-i386/etc/sarg/sarg.conf
SARG: Date format (-g) = USA (mm/dd/yyyy)
SARG: IP report (-i) = No
SARG: Keep temporary files (-k) = No
SARG: Input log (-l) = /var/squid/logs/access.log
SARG: Resolve IP Address (-n) = Yes
SARG: Output dir (-o) = /usr/local/sarg-reports/
SARG: Use Ip Address instead of userid (-p) = No
SARG: Accessed site (-s) =
SARG: Time (-t) =
SARG: User (-u) =
SARG: Temporary dir (-w) = /tmp/sarg
SARG: Debug messages (-x) = Yes
SARG: Process messages (-z) = No
SARG: Previous reports to keep (–lastlog) = 0
SARG:
SARG: sarg version: 2.3.6 Arp-21-2013
SARG: Reading access log file: /var/squid/logs/access.log
SARG: Records in file: 970, reading: 100.00%
SARG: Records read: 970, written: 970, excluded: 0
SARG: Squid log format
SARG: Period: 2014 Jun 30
SARG: Sorting log /tmp/sarg/192_168_1_49.user_unsort
SARG: Sorting log /tmp/sarg/192_168_1_10.user_unsort
SARG: Sorting log /tmp/sarg/user2.user_unsort
SARG: Sorting log /tmp/sarg/192_168_1_71.user_unsort
SARG: Sorting log /tmp/sarg/192_168_1_9.user_unsort
SARG: (repday) Cannot open log file /usr/local/sarg-reports/2014/06/30/192_168_1_49/d192_168_1_49.html

[2.1.3-RELEASE][admin@firewall.x.x.x.x]/root(1): sarg -x
SARG: Init
SARG: Loading configuration from /usr/pbi/sarg-i386/etc/sarg/sarg.conf
SARG: Chaining IP resolving module "dns"
SARG: Loading exclude host file from: /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG: Loading exclude file from: /usr/pbi/sarg-i386/etc/sarg/exclude_users.conf
SARG: Reading host alias file "/usr/pbi/sarg-i386/etc/sarg/hostalias"
SARG: List of host names to alias:
SARG: Deleting temporary directory "/tmp/sarg"
SARG: Parameters:
SARG: Hostname or IP address (-a) =
SARG: Useragent log (-b) =
SARG: Exclude file (-c) = /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG: Date from-until (-d) =
SARG: Email address to send reports (-e) =
SARG: Config file (-f) = /usr/pbi/sarg-i386/etc/sarg/sarg.conf
SARG: Date format (-g) = USA (mm/dd/yyyy)
SARG: IP report (-i) = No
SARG: Keep temporary files (-k) = No
SARG: Input log (-l) = /var/squid/logs/access.log
SARG: Resolve IP Address (-n) = Yes
SARG: Output dir (-o) = /usr/local/sarg-reports/
SARG: Use Ip Address instead of userid (-p) = No
SARG: Accessed site (-s) =
SARG: Time (-t) =
SARG: User (-u) =
SARG: Temporary dir (-w) = /tmp/sarg
SARG: Debug messages (-x) = Yes
SARG: Process messages (-z) = No
SARG: Previous reports to keep (–lastlog) = 0
SARG:
SARG: sarg version: 2.3.6 Arp-21-2013
SARG: Reading access log file: /var/squid/logs/access.log
SARG: Records in file: 970, reading: 100.00%
SARG: Records read: 970, written: 970, excluded: 0
SARG: Squid log format
SARG: Period: 2014 Jun 30
SARG: Sorting log /tmp/sarg/192_168_1_49.user_unsort
SARG: Sorting log /tmp/sarg/192_168_1_10.user_unsort
SARG: Sorting log /tmp/sarg/user2.user_unsort
SARG: Sorting log /tmp/sarg/192_168_1_71.user_unsort
SARG: Sorting log /tmp/sarg/192_168_1_9.user_unsort
SARG: (repday) Cannot open log file /usr/local/sarg-reports/2014/06/30/192_168_1_49/d192_168_1_49.html

[2.1.3-RELEASE][admin@firewall.x.x.x.x]/root(4): sarg -x
SARG: Init
SARG: Loading configuration from /usr/pbi/sarg-i386/etc/sarg/sarg.conf
SARG: Chaining IP resolving module "dns"
SARG: Loading exclude host file from: /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG: Loading exclude file from: /usr/pbi/sarg-i386/etc/sarg/exclude_users.conf
SARG: Reading host alias file "/usr/pbi/sarg-i386/etc/sarg/hostalias"
SARG: List of host names to alias:
SARG: Deleting temporary directory "/tmp/sarg"
SARG: Parameters:
SARG: Hostname or IP address (-a) =
SARG: Useragent log (-b) =
SARG: Exclude file (-c) = /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG: Date from-until (-d) =
SARG: Email address to send reports (-e) =
SARG: Config file (-f) = /usr/pbi/sarg-i386/etc/sarg/sarg.conf
SARG: Date format (-g) = USA (mm/dd/yyyy)
SARG: IP report (-i) = No
SARG: Keep temporary files (-k) = No
SARG: Input log (-l) = /var/squid/logs/access.log
SARG: Resolve IP Address (-n) = Yes
SARG: Output dir (-o) = /usr/local/sarg-reports/
SARG: Use Ip Address instead of userid (-p) = No
SARG: Accessed site (-s) =
SARG: Time (-t) =
SARG: User (-u) =
SARG: Temporary dir (-w) = /tmp/sarg
SARG: Debug messages (-x) = Yes
SARG: Process messages (-z) = No
SARG: Previous reports to keep (–lastlog) = 0
SARG:
SARG: sarg version: 2.3.6 Arp-21-2013
SARG: Reading access log file: /var/squid/logs/access.log
SARG: Records in file: 970, reading: 100.00%
SARG: Records read: 970, written: 970, excluded: 0
SARG: Squid log format
SARG: Period: 2014 Jun 30
SARG: Sorting log /tmp/sarg/192_168_1_49.user_unsort
SARG: Sorting log /tmp/sarg/192_168_1_10.user_unsort
SARG: Sorting log /tmp/sarg/user2.user_unsort
SARG: Sorting log /tmp/sarg/192_168_1_71.user_unsort
SARG: Sorting log /tmp/sarg/192_168_1_9.user_unsort
SARG: (repday) Cannot open log file /usr/local/sarg-reports/2014/06/30/192_168_1_49/d192_168_1_49.html
[2.1.3-RELEASE][admin@firewall.x.x.x.x]/root(6): cat /usr/pbi/sarg-i386/etc/sarg/sarg.conf | more

sarg.conf

TAG: access_log file

# Where is the access.log
# sarg -l file

access_log /var/squid/logs/access.log

TAG: graphs yes|no

# Use graphics where is possible.
# graph_days_bytes_bar_color blue|green|yellow|orange|brown|red

graphs yes
#graph_days_bytes_bar_color orange

TAG: graph_font

# The full path to the TTF font file to use to create the graphs. It is required
# if graphs is set to yes.

#graph_font /usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf

TAG: title

# Especify the title for html page.

#title "Squid User Access Reports"

TAG: font_face

# Especify the font for html page.

#font_face Tahoma,Verdana,Arial

TAG: header_color

# Especify the header color

#header_color darkblue

TAG: header_bgcolor

# Especify the header bgcolor

#header_bgcolor blanchedalmond

TAG: font_size

# Especify the text font size

#font_size 9px

TAG: header_font_size

# Especify the header font size

#header_font_size 9px

TAG: title_font_size

# Especify the title font size

#title_font_size 11px

TAG: background_color

TAG: background_color

# Html page background color

background_color white

TAG: text_color

# Html page text color

#text_color #000000

TAG: text_bgcolor

# Html page text background color

#text_bgcolor lavender

TAG: title_color

# Html page title color

#title_color green

TAG: logo_image

# Html page logo.

#logo_image none

TAG: logo_text

# Html page logo text.

#logo_text ""

TAG: logo_text_color

# Html page logo texti color.

#logo_text_color #000000

TAG: logo_image_size

# Html page logo image size.
# width height

#image_size 80 45

TAG: background_image

# Html page background image

#background_image none

TAG: password

# User password file used by Squid authentication scheme
# If used, generate reports just for that users.

#password none

TAG: temporary_dir

# Temporary directory name for work files
# sarg -w dir

#temporary_dir /tmp

TAG: output_dir

# The reports will be saved in that directory
# sarg -o dir

output_dir /usr/local/sarg-reports

TAG: anonymous_output_files yes/no

# Use anonymous file and directory names in the report. If it is set to
# no (the default), the user id/ip/name is slightly mangled to create a
# suitable file name to store the report of the user but the user's
# identity can easily be guessed from the mangled name. If this option is
# set, any file or directory belonging to the user is replaced by a short
# number. The purpose is to hide the identity of the user when looking
# at the report file names but it may serve to shorten the path too.

anonymous_output_files no

TAG: output_email

# Email address to send the reports. If you use this tag, no html reports will be generated.
# sarg -e email

#output_email none

TAG: resolve_ip yes/no

# Convert ip address to dns name
# sarg -n
resolve_ip yes

TAG: user_ip yes/no

# Use Ip Address instead userid in reports.
# sarg -p
user_ip no

TAG: topuser_sort_field field normal/reverse

# Sort field for the Topuser Report.
# Allowed fields: USER CONNECT BYTES TIME

topuser_sort_field TIME normal

TAG: user_sort_field field normal/reverse

# Sort field for the User Report.
# Allowed fields: SITE CONNECT BYTES TIME

user_sort_field TIME normal

TAG: exclude_users file

# users within the file will be excluded from reports.
# you can use indexonly to have only index.html file.

exclude_users /usr/pbi/sarg-i386/etc/sarg/exclude_users.conf

TAG: exclude_hosts file

# Hosts, domains or subnets will be excluded from reports.

# Eg.: 192.168.10.10 - exclude ip address only
# 192.168.10.0/24 - exclude full C class
# s1.acme.foo - exclude hostname only
# *.acme.foo - exclude full domain name

exclude_hosts /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf

TAG: useragent_log file

# useragent.log file patch to generate useragent report.

#useragent_log none

TAG: date_format

# Date format in reports: e (European=dd/mm/yy), u (American=mm/dd/yy), w (Weekly=yy.ww)

#date_format u
date_format u

TAG: per_user_limit file MB

# Saves userid on file if download exceed n MB.
# This option allow you to disable user access if user exceed a download limit.

#per_user_limit none

TAG: lastlog n

# How many reports files must be kept in reports directory.
# The oldest report file will be automatically removed.
# 0 - no limit.

#lastlog 0
lastlog 0

TAG: remove_temp_files yes

# Remove temporary files: geral, usuarios, top, periodo from root report directory.

remove_temp_files yes

TAG: index yes|no|only

# Generate the main index.html.
# only - generate only the main index.html

index yes

TAG: index_tree date|file

# How to generate the index.

index_tree date

TAG: index_fields

# The columns to show in the index of the reports
# Columns are: dirsize

#index_fields dirsize

TAG: overwrite_report yes|no

# yes - if report date already exist then will be overwrited.
# no - if report date already exist then will be renamed to filename.n, filename.n+1

overwrite_report yes

TAG: records_without_userid ignore|ip|everybody

# What can I do with records without user id (no authentication) in access.log file ?

# ignore - This record will be ignored.
# ip - Use ip address instead. (default)
# everybody - Use "everybody" instead.

#records_without_userid ip

TAG: use_comma no|yes

# Use comma instead point in reports.
# Eg.: use_comma yes => 23,450,110
# use_comma no => 23.450.110

use_comma yes

TAG: mail_utility

# Mail command to use to send reports via SMTP. Sarg calls it like this:
# mail_utility -s "SARG report, date" "output_email" <"mail_content"

# Therefore, it is possible to add more arguments to the command by specifying them
# here.

# If you need too, you can use a shell script to process the content of /dev/stdin
# (/dev/stdin is the mail_content passed by sarg to the script) and call whatever
# command you like. It is not limited to mailing the report via SMTP.

# Don't forget to quote the command if necessary (i.e. if the path contains
# characters that must be quoted).

#mail_utility mailx

TAG: topsites_num n

# How many sites in topsites report.

#topsites_num 100

TAG: topsites_sort_order CONNECT|BYTES|TIME A|D

# Sort for topsites report, where A=Ascendent, D=Descendent

#topsites_sort_order CONNECT D

TAG: index_sort_order A/D

# Sort for index.html, where A=Ascendent, D=Descendent

#index_sort_order D

TAG: exclude_codes file

# Ignore records with these codes. Eg.: NONE/400
# Write one code per line. Lines starting with a # are ignored.
# Only codes matching exactly one of the line is rejected. The
# comparison is not case sensitive.

exclude_codes /usr/pbi/sarg-i386/etc/sarg/exclude_codes

TAG: replace_index string

# Replace "index.html" in the main index file with this string
# If null "index.html" is used

#replace_index

TAG: max_elapsed milliseconds

# If elapsed time is recorded in log is greater than max_elapsed use 0 for elapsed time.
# Use 0 for no checking

#max_elapsed 28800000

8 Hours

max_elapsed 0

TAG: report_type type

# What kind of reports to generate.
# topusers - users, sites, times, bytes, connects, links to accessed sites, etc
# topsites - site, connect and bytes report
# sites_users - users and sites report
# users_sites - accessed sites by the user report
# date_time - bytes used per day and hour report
# denied - denied sites with full URL report
# auth_failures - autentication failures report
# site_user_time_date - sites, dates, times and bytes report
# downloads - downloads per user report

# Eg.: report_type topsites denied

#report_type topusers topsites sites_users users_sites date_time denied auth_failures site_user_time_date downloads
report_type topusers

TAG: usertab filename

# You can change the "userid" or the "ip address" to be a real user name on the reports.
# If resolve_ip is active, the ip address is resolved before being looked up into this
# file. That is, if you want to map the ip address, be sure to set resolv_ip to no or
# the resolved name will be looked into the file instead of the ip address. Note that
# it can be used to resolve any ip address known to the dns and then map the unresolved
# ip addresses to a name found in the usertab file.
# Table syntax:
# userid name or ip address name
# Eg:
# SirIsaac Isaac Newton
# vinci Leonardo da Vinci
# 192.168.10.1 Karol Wojtyla

# Each line must be terminated with '\ n'
# If usertab have value "ldap" (case ignoring), user names
# will be taken from LDAP server. This method as approaches for reception
# of usernames from Active Didectory

#usertab none
usertab none

TAG: LDAPHost hostname

# FQDN or IP address of host with LDAP service or AD DC
# default is '127.0.0.1'
#LDAPHost 127.0.0.1

TAG: LDAPPort port

# LDAP service port number
# default is '389'
#LDAPPort 389

TAG: LDAPBindDN CN=username,OU=group,DC=mydomain,DC=com

# DN of LDAP user, who is authorized to read user's names from LDAP base
# default is empty line
#LDAPBindDN cn=proxy,dc=mydomain,dc=local

TAG: LDAPBindPW secret

# Password of DN, who is authorized to read user's names from LDAP base
# default is empty line
#LDAPBindPW secret

TAG: LDAPBaseSearch OU=users,DC=mydomain,DC=com

# LDAP search base
# default is empty line
#LDAPBaseSearch ou=users,dc=mydomain,dc=local

TAG: LDAPFilterSearch (uid=%s)

# User search filter by user's logins in LDAP
# First founded record will be used
# %s - will be changed to userlogins from access.log file
# filter string can have up to 5 '%s' tags
# default value is '(uid=%s)'
#LDAPFilterSearch (uid=%s)

TAG: LDAPTargetAttr attributename

# Name of the attribute containing a name of the user
# default value is 'cn'
#LDAPTargetAttr cn

TAG: long_url yes|no

# If yes, the full url is showed in report.
# If no, only the site will be showed

# YES option generate very big sort files and reports.

long_url no

TAG: date_time_by bytes|elap

# Date/Time reports show the downloaded volume or the elapsed time or both.

#date_time_by bytes
date_time_by bytes

TAG: charset name

# ISO 8859 is a full series of 10 standardized multilingual single-byte coded (8bit)
# graphic character sets for writing in alphabetic languages
# You can use the following charsets:
# Latin1 - West European
# Latin2 - East European
# Latin3 - South European
# Latin4 - North European
# Cyrillic
# Arabic
# Greek
# Hebrew
# Latin5 - Turkish
# Latin6
# Windows-1251
# Japan
# Koi8-r
# UTF-8

#charset Latin1
charset UTF-8

TAG: user_invalid_char "&/"

# Records that contain invalid characters in userid will be ignored by Sarg.

#user_invalid_char "&/"

TAG: privacy yes|no

# privacy_string "..."
# privacy_string_color blue
# In some countries the sysadm cannot see the visited sites by a restrictive law.
# Using privacy yes the visited url will be changes by privacy_string and the link
# will be removed from reports.

privacy no
#privacy_string "..."
#privacy_string_color blue

TAG: include_users "user1:user2:…:usern"

# Reports will be generated only for listed users.

#include_users none

TAG: exclude_string "string1:string2:...:stringn"

# Records from access.log file that contain one of listed strings will be ignored.

#exclude_string none

TAG: show_successful_message yes|no

# Shows "Successful report generated on dir" at end of process.

#show_successful_message yes

TAG: show_read_statistics yes|no

# Shows some reading statistics.

#show_read_statistics yes

TAG: topuser_fields

# Which fields must be in Topuser report.

#topuser_fields NUM DATE_TIME USERID CONNECT BYTES %BYTES IN-CACHE-OUT USED_TIME MILISEC %TIME TOTAL AVERAGE

TAG: user_report_fields

# Which fields must be in User report.

#user_report_fields CONNECT BYTES %BYTES IN-CACHE-OUT USED_TIME MILISEC %TIME TOTAL AVERAGE

TAG: bytes_in_sites_users_report yes|no

# Bytes field must be in Site & Users Report ?

#bytes_in_sites_users_report no
bytes_in_sites_users_report no

TAG: topuser_num n

# How many users in topsites report. 0 = no limit

#topuser_num 0
topuser_num 0

TAG: datafile file

# Save the report results in a file to populate some database

#datafile none

TAG: datafile_delimiter " "

# ascii character to use as a field separator in datafile

#datafile_delimiter ""

TAG: datafile_fields all

# Which data fields must be in datafile
# user;date;time;url;connect;bytes;in_cache;out_cache;elapsed

#datafile_fields user;date;time;url;connect;bytes;in_cache;out_cache;elapsed

TAG: datafile_url ip|name

# Saves the URL as ip or name in datafile

#datafile_url ip

TAG: weekdays

# The weekdays to take into account ( Sunday->0, Saturday->6 )

Example:

#weekdays 1-3,5

Default:

#weekdays 0-6

TAG: hours

# The hours to take into account

Example:

#hours 7-12,14,16,18-20

Default:

#hours 0-23

TAG: dansguardian_conf file

# DansGuardian.conf file path
# Generate reports from DansGuardian logs.
# Use 'none' to disable it.
# dansguardian_conf /usr/dansguardian/dansguardian.conf

dansguardian_conf

TAG: dansguardian_filter_out_date on|off

# This option replaces dansguardian_ignore_date whose name was not appropriate with respect to its action.
# Note the change of parameter value compared with the old option.
# 'off' use the record even if its date is outside of the range found in the input log file.
# 'on' use the record only if its date is in the range found in the input log file.

TAG: squidguard_conf file

# path to squidGuard.conf file
# Generate reports from SquidGuard logs.
# Use 'none' to disable.
# You can use sarg -L filename to use an alternate squidGuard log.
# squidguard_conf /usr/local/squidGuard/squidGuard.conf

TAG: redirector_log file

# the location of the web proxy redirector log such as one created by squidGuard or Rejik. The option
# may be repeated up to 64 times to read multiple files.
# If this option is specified, it takes precedence over squidguard_conf.
# The command line option -L override this option.

#redirector_log /usr/local/squidGuard/var/logs/urls.log

TAG: redirector_filter_out_date on|off

# This option replaces squidguard_ignore_date and redirector_ignore_date whose names were not
# appropriate with respect to their action.
# Note the change of parameter value compared with the old options.
# 'off' use the record even if its date is outside of the range found in the input log file.
# 'on' use the record only if its date is in the range found in the input log file.

#redirector_filter_out_date on

TAG: redirector_log_format

# Format string for web proxy redirector logs.
# This option was named squidguard_log_format before sarg 2.3.
# REJIK #year#-#mon#-#day# #hour# #list#:#tmp# #ip# #user# #tmp#/#tmp#/#url#/#end#
# SQUIDGUARD #year#-#mon#-#day# #hour# #tmp#/#list#/#tmp#/#tmp#/#url#/#tmp# #ip#/#tmp# #user# #end#
#redirector_log_format #year#-#mon#-#day# #hour# #tmp#/#list#/#tmp#/#tmp#/#url#/#tmp# #ip#/#tmp# #user# #end#

TAG: show_sarg_info yes|no

# shows sarg information and site path on each report bottom

show_sarg_info no

TAG: show_sarg_logo yes|no

# shows sarg logo

show_sarg_logo no

TAG: parsed_output_log directory

# Saves the processed log in a sarg format after parsing the squid log file.
# This is a way to dump all of the data structures out, after parsing from
# the logs (presumably this data will be much smaller than the log files themselves),
# and pull them back in for later processing and merging with data from previous logs.

#parsed_output_log none

TAG: parsed_output_log_compress /bin/gzip|/usr/bin/bzip2|nocompress

# Command to run to compress sarg parsed output log. It may contain
# options (such as -f to overwrite existing target file). The name of
# the file to compresse is provided at the end of this
# command line. Don't forget to quote things appropriately.

#parsed_output_log_compress /bin/gzip

TAG: displayed_values bytes|abbreviation

# how the values will be displayed in reports.
# eg. bytes - 209.526
# abbreviation - 210K

#displayed_values bytes
displayed_values bytes

Report limits

TAG: authfail_report_limit n

TAG: denied_report_limit n

TAG: siteusers_report_limit n

TAG: squidguard_report_limit n

TAG: user_report_limit n

TAG: dansguardian_report_limit n

TAG: download_report_limit n

# report limits (lines).
# '0' no limit

#authfail_report_limit 10
authfail_report_limit 0
#denied_report_limit 10
denied_report_limit 0
#siteusers_report_limit 0
#squidguard_report_limit 10
#dansguardian_report_limit 10
#user_report_limit 10
#user_report_limit 50
siteusers_report_limit 0
user_report_limit 0

TAG: www_document_root dir

# Where is your Web DocumentRoot
# Sarg will create sarg-php directory with some PHP modules:
# - sarg-squidguard-block.php - add urls from user reports to squidGuard DB

#www_document_root /var/www/html
www_document_root /usr/local/www

TAG: block_it module_url

# This tag allow you to pass urls from user reports to a cgi or php module,
# to be blocked by some Squid acl

# Eg.: block_it /sarg-php/sarg-block-it.php
# sarg-block-it is a php that will append a url to a flat file.
# You must change /var/www/html/sarg-php/sarg-block-it to point to your file
# in variable, and chown to a httpd owner.

# sarg will pass http://module_url?url=url

#block_it none

TAG: external_css_file path

# Provide the path to an external css file to link into the HTML reports instead of
# the inline css written by sarg when this option is not set.

# In versions prior to 2.3, this used to be an absolute file name to
# a file to include verbatim in each HTML page but, as it takes a lot of
# space, version 2.3 switched to a link to an external css file.
# Therefore, this option must contain the HTTP server path on which a client
# browser may find the css file.

# Sarg use theses style classes:
# .logo logo class
# .info sarg information class, align=center
# .title_c title class, align=center
# .header_c header class, align:center
# .header_l header class, align:left
# .header_r header class, align:right
# .text text class, align:right
# .data table text class, align:right
# .data2 table text class, align:left
# .data3 &nb

lucapsg

Hi guys, two questions and a suggestion.
I configured Sarg in order to analyze the logs of DansGuardian.

How many days keeps the log rotation made by Sarg?
Where do you configure this period, both for Sarg and DansGuardian?

As Marcelo (https://forum.pfsense.org/index.php?topic=50239.msg270375#msg270375), at this time my scheduled tasks are only two:

Status	Update	Aditional Args						Post		Description
	Frequency							Action
on	1h 	-d `date +%d/%m/%Y`					none		Today
on	1d 	-d `date +01/%m/%Y`-`date +31/%m/%Y`			none		This month

Since these operations produce reports that do not include the data generated in the last part of the period (respectively, from 23:00 to 00:00 and in the last day of the month), it would be a useful planning like this:

Status	Update	Aditional Args						Post		Description
	Frequency							Action
on	1h 	-d `date +%d/%m/%Y`					none		Today
on	1d	-d `date -v-1d +%d/%m/%Y`				none		Consolidate yesterday
on	1d 	-d `date +01/%m/%Y`-`date +31/%m/%Y`			none		This month
	30d	-d `date -v-1m +01/%m/%Y`-`date -v-1m +31/%m/%Y`	rotate		Consolidate last month

But this is not possible because planning more operations with the same frequency produces an error:

Jun 27 00:00:01 	php: sarg.php: The command 'export LC_ALL=C && /usr/pbi/sarg-amd64/bin/sarg -d `date -v-1d +%d/%m/%Y`' returned exit code '1', the output was 'SARG: Cannot create directory /tmp/sarg - File exists'
Jun 27 00:00:00 	php: sarg.php: Sarg: force refresh now with -d `date +01/%m/%Y`-`date +31/%m/%Y` args, compress() and none action after sarg finish.
Jun 27 00:00:00 	php: sarg.php: Sarg: force refresh now with -d `date -v-1d +%d/%m/%Y` args, compress() and none action after sarg finish.

To solve this problem it would seem sufficient to create the directory /tmp/sarg only if it does not exist and every time create a subdirectory with the name of the report to be generated. In any case, any other solution that would enable the simultaneous execution of multiple operations is welcome :D

Obviously, the last operation specified above can not be performed every 30 days, but the 1st day of each month: this is not possible to specify it in the GUI, although CRON could do it. ;)

Thank you.

Cattura.JPG_thumb

Averenix

Potential fix for those experiencing the:

Error: Could not find report index file.
Check and save sarg settings and try to force sarg schedule.

Seems there is a bug with Sarg 2.3.6 (which the pfSense package uses) which means you MUST select sites_users and users_sites in the report types, otherwise Sarg fails to run.
See bug here: http://sourceforge.net/p/sarg/bugs/154/

This has been resolved in Sarg 2.4.

MarkVLK

Hey guys, I just installed pfSense today and have been trying to get everything set up and am running into some issues with Sarg (and Lightsquid for that matter).

I'm trying to get Sarg and Lightsquid to generate reports from Squid proxy, but for some reason they're both having trouble.

Sarg gives me an error:

[ Sarg config error: squid log file (/var/squid/logs/access.log) does not exists]

and Lightsquid gives me the error:

Error : report folder '/var/lightsquid/report' not contain any valid data! Please run lightparser.pl (and check 'report' folder content)

For Lightsquid, I tried clicking both "Refresh now" and "Refresh full" but still got the same error. For Sarg I checked /var/squid/logs/ and there is only one file - cache.log

Is there something I haven't configured correctly with Squid, or anyone experience and solve these issues in the past? Any help would be greatly appreciated!

KOM

Please start a new thread for your problem and I'll be happy to take a look. This thread is for a particular Sarge issue.

MarkVLK

@KOM:

Please start a new thread for your problem and I'll be happy to take a look. This thread is for a particular Sarge issue.

Sorry, didn't mean to hijack this thread! I posted a new thread here:
https://forum.pfsense.org/index.php?topic=79140.0

PokerMunkee

I'm a newb at this. Forgive me.

Is there a pretty way of exporting logs? If a manager asks for an Internet usage report for certain computer with a date range, how would I do this?

I take it I create a custom Schedule. I want the report to show the Date/Time and website.

KOM

You should probably start a new thread instead of hijacking this one that's already 27 pages long.

peruvichito2014

Hi Gurus
After some investigation I obtaind some type of report

By command line I changed some value and obtain these parameter in the sarg.conf file:

[2.1.3-RELEASE][admin@pfSense.localdomain]/usr/pbi/sarg-amd64/etc/sarg(28): cat sarg.conf | sed -e '/^#/d' -e '/^$/d'
access_log /var/squid/logs/access.log
graphs yes
output_dir /usr/local/sarg-reports
anonymous_output_files yes
resolve_ip yes
user_ip no
topuser_sort_field BYTES normal
user_sort_field BYTES normal
exclude_users /usr/pbi/sarg-amd64/etc/sarg/exclude_users.conf
exclude_hosts /usr/pbi/sarg-amd64/etc/sarg/exclude_hosts.conf
date_format e
lastlog 0
remove_temp_files yes
index yes
index_tree file
overwrite_report yes
use_comma yes
exclude_codes /usr/pbi/sarg-amd64/etc/sarg/exclude_codes
max_elapsed 0
report_type sites_users users_sites
usertab none
long_url yes
date_time_by bytes
charset Latin3
privacy no
bytes_in_sites_users_report no
topuser_num 0
dansguardian_conf
show_sarg_info no
show_sarg_logo no
displayed_values bytes
authfail_report_limit 0
denied_report_limit 0
siteusers_report_limit 0
user_report_limit 0
www_document_root /usr/local/www
ntlm_user_format domainname+username
realtime_refresh_time 0
realtime_types GET,PUT,CONNECT
realtime_unauthenticated_records show
sorttable /sarg_sorttable.js
hostalias /usr/pbi/sarg-amd64/etc/sarg/hostalias
[2.1.3-RELEASE][admin@pfSense.localdomain]/usr/pbi/sarg-amd64/etc/sarg(29):

And after run this executable command:

[2.1.3-RELEASE][admin@pfSense.localdomain]/usr/pbi/sarg-amd64/etc/sarg(30): sarg -x

Appear a succesfull response:

….....
...........
..............
SARG: Sorting log /tmp/sarg/141.user_unsort
SARG: Making index.html
SARG: Successful report generated on /usr/local/sarg-reports/06Aug2014-20Aug2014
SARG: Purging temporary file sarg-general
SARG: End
[2.1.3-RELEASE][admin@pfSense.localdomain]/usr/pbi/sarg-amd64/etc/sarg(31):

See the picture below

But this report appear another problem

Fatal error: Allowed memory size of 262144000 bytes exhausted (tried to allocate 103903809 bytes) in /usr/local/www/sarg_frame.php on line 77

This line means in this file means:

[2.1.3-RELEASE][admin@pfSense.localdomain]/usr/local/www(43): sed '77q;d' sarg_frame.php
print preg_replace($pattern,$replace,$report);
[2.1.3-RELEASE][admin@pfSense.localdomain]/usr/local/www(44):

The question is how to resolv this event???

I hope your suggestion / Recomendation

Regard

Reportes.jpg_thumb

MarkVLK

My Sarg doesn't seem to be generating reports anymore since I updated to pfSense 2.1.5, is this expected or do I need to change something? I already changed the conf so that it was pointing to what I think is the correct access.log (or something like that, I forget if that was the exact file name now) and that seems to have fixed an error I was seeing in my system logs, but no reports are being generated anymore, I just see this in the system logs when it is meant to create a report

php: sarg.php: Sarg: force refresh now with args, compress() and none action after sarg finish.

Any ideas what might be wrong?

sujyo1

my sarg problem start after update to 2.1.5.

sarg view report showing:

Error: Could not find report index file.
Check and save sarg settings and try to force sarg schedule.

sys log showing:

Sep 16 00:00:01 php: sarg.php: Sarg: force refresh now with -d date +%d/%m/%Y-date +%d/%m/%Y args, compress(on) and none action after sarg finish.
Sep 16 00:00:01 php: sarg.php: Sarg: force refresh now with -d date +%d/%m/%Y-date +%d/%m/%Y args, compress(on) and none action after sarg finish.

[2.1.5-RELEASE][admin@xxxxxx.localdomain]/root(1): sarg
SARG: Records in file: 50, reading: 100.00%
SARG: No records found
SARG: End

[2.1.5-RELEASE][admin@xxxxxx.localdomain]/root(5): pkg_info
bsdinstaller-2.0.2014.0410 BSD Installer mega-package
gettext-0.18.3.1 GNU gettext package
libiconv-1.14_1 A character set conversion library

[2.1.5-RELEASE][admin@xxxxx.localdomain]/root(6): sarg -x
SARG: Init
SARG: Loading configuration from /usr/pbi/sarg-i386/etc/sarg/sarg.conf
SARG: Loading exclude host file from: /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG: Loading exclude file from: /usr/pbi/sarg-i386/etc/sarg/exclude_users.conf
SARG: Reading host alias file "/usr/pbi/sarg-i386/etc/sarg/hostalias"
SARG: List of host names to alias:
SARG: Deleting temporary directory "/tmp/sarg"
SARG: Parameters:
SARG: Hostname or IP address (-a) =
SARG: Useragent log (-b) =
SARG: Exclude file (-c) = /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG: Date from-until (-d) =
SARG: Email address to send reports (-e) =
SARG: Config file (-f) = /usr/pbi/sarg-i386/etc/sarg/sarg.conf
SARG: Date format (-g) = USA (mm/dd/yyyy)
SARG: IP report (-i) = No
SARG: Keep temporary files (-k) = No
SARG: Input log (-l) = /var/squid/logs/access.log
SARG: Resolve IP Address (-n) = No
SARG: Output dir (-o) = /usr/local/sarg-reports/
SARG: Use Ip Address instead of userid (-p) = No
SARG: Accessed site (-s) =
SARG: Time (-t) =
SARG: User (-u) =
SARG: Temporary dir (-w) = /tmp/sarg
SARG: Debug messages (-x) = Yes
SARG: Process messages (-z) = No
SARG: Previous reports to keep (–lastlog) = 0
SARG:
SARG: sarg version: 2.3.6 Arp-21-2013
SARG: Reading access log file: /var/squid/logs/access.log
SARG: Records in file: 50, reading: 100.00%
SARG: Records read: 50, written: 0, excluded: 0
SARG: Squid log format
SARG: No records found
SARG: End

cat /usr/pbi/sarg-i386/etc/sarg/sarg.conf | more

sarg.conf

TAG: access_log file

# Where is the access.log
# sarg -l file

access_log /var/squid/logs/access.log

TAG: graphs yes|no

graphs yes
#graph_days_bytes_bar_color orange

TAG: graph_font

# The full path to the TTF font file to use to create the graphs. It is required
# if graphs is set to yes.

#graph_font /usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf

TAG: title

--More--(byte 529)# sarg.conf

ck42

Looks like Sarg is not working again.
Updated to 2.2 the other day. Sarg is the latest version available in packages (2.3.9 pkg v.0.6.4) and running squid (2.7.9 pkg v.4.3.6)

Attempting to run the Reports gives 'Could not find report index file.' message.
Trying to run Sarg from the CLI gives me 'Cannot set the locale LC_ALL to the environment variable'

Anyone have Sarg working with pf 2.2?

KOM

Doing a quick search for Sarg and picking a result a little more current would have led you to this thread here with a solution.

ck42

Funny that you refer to that thread, KOM. I had actually read through that prior to posting.
I had already tried creating the symlink on my system with no luck. That's why I wanted to know if anyone actually has this working with 2.2…hoping that they would confirm whether or not any special steps needed to be taken to make it work.

marcelloc

I have. I did only the symlink.

Try to run sarg on console to see what erros do you get.

If you install cron package, you can see how I call configured report schedule.

KOM

Cannot set the locale LC_ALL to the environment variable

I saw this on Solaris about 10 years ago. I forget what the fix was. Haven't seen it on 2.2 x64, and I've installed it many, many times. As Mercello said, run sarg or sarg -x from the console and see what it says.

marcelloc

@KOM:

Cannot set the locale LC_ALL to the environment variable

This is already applied to the package since pfSense 2.1 . Run an export before the sarg cmd.

 export LC_ALL=C && sarg...

ck42

$  export LC_ALL=C && sarg
SARG: Records in file: 0, reading: 0.00%
SARG: No records found
SARG: End
SARG: Records in file: 0, reading: 100.00%

$ sarg -x
SARG: Cannot set the locale LC_ALL to the environment variable

marcelloc

looks like you have no logs on squid file

sarg -x also need the export LC_ALL=C &&

ck42

@marcelloc:

looks like you have no logs on squid file

sarg -x also need the export LC_ALL=C &&

Not entirely following you by this suggestion. But I think you are wanting the output of this from?
sarg -x export LC_ALL=C &&

If so, the output just shows the same command entered (this is from the GUI). No error messages or anything else.

In looking at the log files in /var/squid/log, I noticed that all of the access.log files are EMPTY (0 byte files). The cache logs look normal though. Also, all the dates on the log files in that dir are current from the last few days.
I'm not sure how to proceed next though to troubleshoot this. Seems to me that this may be the issue (or at least part of it). Why are the access log files not accumulating data?

[EDIT] Might be on to something. I forced an update in a schedule and then noticed that the .0 access log is accumulating. The View Report tab also now no longer gives me the error about the index file.
So what I've done for a test is to disable the log rotation in the report settings. Log rotation is already set for 30 days in the Squid setup.

Still seeing " Cannot set the locale LC_ALL to the environment variable" when I try to run sarg -x though.

Something else that might be helpful from my system.

# LC_ALL=C sarg -x
SARG: Init
SARG: Loading configuration from /usr/local/etc/sarg/sarg.conf
SARG: Chaining IP resolving module "dns"
SARG: Loading exclude host file from: /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG: Loading exclude file from: /usr/pbi/sarg-i386/etc/sarg/exclude_users.conf
SARG: Reading host alias file "/usr/pbi/sarg-i386/etc/sarg/hostalias"
SARG: List of host names to alias:
SARG: Parameters:
SARG:           Hostname or IP address (-a) =
SARG:                    Useragent log (-b) =
SARG:                     Exclude file (-c) = /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG:                  Date from-until (-d) =
SARG:    Email address to send reports (-e) =
SARG:                      Config file (-f) = /usr/local/etc/sarg/sarg.conf
SARG:                      Date format (-g) = Sites & Users (yyyy/ww)
SARG:                        IP report (-i) = No
SARG:             Keep temporary files (-k) = No
SARG:                        Input log (-l) = /var/squid/logs/access.log
SARG:               Resolve IP Address (-n) = Yes
SARG:                       Output dir (-o) = /usr/local/sarg-reports/
SARG: Use Ip Address instead of userid (-p) = Yes
SARG:                    Accessed site (-s) =
SARG:                             Time (-t) =
SARG:                             User (-u) =
SARG:                    Temporary dir (-w) = /tmp/sarg
SARG:                   Debug messages (-x) = Yes
SARG:                 Process messages (-z) = No
SARG:  Previous reports to keep (--lastlog) = 0
SARG:
SARG: sarg version: 2.3.9 Sep-21-2014
SARG: Loading User table: /usr/pbi/sarg-i386/etc/sarg/usertab.conf
SARG: Reading access log file: /var/squid/logs/access.log
SARG: Records in file: 174, reading: 100.00%
SARG:    Records read: 174, written: 174, excluded: 0
SARG: Squid log format
SARG: Period: 2015.05
SARG: Sorting log /tmp/sarg/0.user_unsort
SARG: Sorting log /tmp/sarg/1.user_unsort
SARG: Sorting log /tmp/sarg/2.user_unsort
SARG: (repday) Cannot open log file /usr/local/sarg-reports/2015.05/0/d0.html

Regarding that very last line of output, here's what in the 2015.05 directory:

# ls -la /usr/local/sarg-reports/2015.05
total 18
drwxr-xr-x  2 root  wheel   512 Feb  4 11:54 .
drwxr-xr-x  5 root  wheel   512 Feb  4 11:54 ..
-rw-r--r--  1 root  wheel  4437 Feb  4 11:54 index.html
-rw-r--r--  1 root  wheel    22 Feb  4 11:54 sarg-date
-rw-r--r--  1 root  wheel  1398 Feb  4 11:54 sarg-general
-rw-r--r--  1 root  wheel     2 Feb  4 11:54 sarg-users
-rw-r--r--  1 root  wheel   116 Feb  4 11:54 top

So it's correct in that there's no "0" directory in which to find the d0.html file it's looking for.
A system wide search for this file DOES show that a copy exist here though.
/usr/pbi/sarg-i386/local/sarg-reports/2015.01.1/0/d0.html

And lastly, the Realtime logging appears to be working correctly.