Sarg package for pfsense

KOM

You should probably start a new thread instead of hijacking this one that's already 27 pages long.

peruvichito2014

Hi Gurus
After some investigation I obtaind some type of report

By command line I changed some value and obtain these parameter in the sarg.conf file:

[2.1.3-RELEASE][admin@pfSense.localdomain]/usr/pbi/sarg-amd64/etc/sarg(28): cat sarg.conf | sed -e '/^#/d' -e '/^$/d'
access_log /var/squid/logs/access.log
graphs yes
output_dir /usr/local/sarg-reports
anonymous_output_files yes
resolve_ip yes
user_ip no
topuser_sort_field BYTES normal
user_sort_field BYTES normal
exclude_users /usr/pbi/sarg-amd64/etc/sarg/exclude_users.conf
exclude_hosts /usr/pbi/sarg-amd64/etc/sarg/exclude_hosts.conf
date_format e
lastlog 0
remove_temp_files yes
index yes
index_tree file
overwrite_report yes
use_comma yes
exclude_codes /usr/pbi/sarg-amd64/etc/sarg/exclude_codes
max_elapsed 0
report_type sites_users users_sites
usertab none
long_url yes
date_time_by bytes
charset Latin3
privacy no
bytes_in_sites_users_report no
topuser_num 0
dansguardian_conf
show_sarg_info no
show_sarg_logo no
displayed_values bytes
authfail_report_limit 0
denied_report_limit 0
siteusers_report_limit 0
user_report_limit 0
www_document_root /usr/local/www
ntlm_user_format domainname+username
realtime_refresh_time 0
realtime_types GET,PUT,CONNECT
realtime_unauthenticated_records show
sorttable /sarg_sorttable.js
hostalias /usr/pbi/sarg-amd64/etc/sarg/hostalias
[2.1.3-RELEASE][admin@pfSense.localdomain]/usr/pbi/sarg-amd64/etc/sarg(29):

And after run this executable command:

[2.1.3-RELEASE][admin@pfSense.localdomain]/usr/pbi/sarg-amd64/etc/sarg(30): sarg -x

Appear a succesfull response:

….....
...........
..............
SARG: Sorting log /tmp/sarg/141.user_unsort
SARG: Making index.html
SARG: Successful report generated on /usr/local/sarg-reports/06Aug2014-20Aug2014
SARG: Purging temporary file sarg-general
SARG: End
[2.1.3-RELEASE][admin@pfSense.localdomain]/usr/pbi/sarg-amd64/etc/sarg(31):

See the picture below

But this report appear another problem

Fatal error: Allowed memory size of 262144000 bytes exhausted (tried to allocate 103903809 bytes) in /usr/local/www/sarg_frame.php on line 77

This line means in this file means:

[2.1.3-RELEASE][admin@pfSense.localdomain]/usr/local/www(43): sed '77q;d' sarg_frame.php
print preg_replace($pattern,$replace,$report);
[2.1.3-RELEASE][admin@pfSense.localdomain]/usr/local/www(44):

The question is how to resolv this event???

I hope your suggestion / Recomendation

Regard

Reportes.jpg_thumb

MarkVLK

My Sarg doesn't seem to be generating reports anymore since I updated to pfSense 2.1.5, is this expected or do I need to change something? I already changed the conf so that it was pointing to what I think is the correct access.log (or something like that, I forget if that was the exact file name now) and that seems to have fixed an error I was seeing in my system logs, but no reports are being generated anymore, I just see this in the system logs when it is meant to create a report

php: sarg.php: Sarg: force refresh now with args, compress() and none action after sarg finish.

Any ideas what might be wrong?

sujyo1

my sarg problem start after update to 2.1.5.

sarg view report showing:

Error: Could not find report index file.
Check and save sarg settings and try to force sarg schedule.

sys log showing:

Sep 16 00:00:01 php: sarg.php: Sarg: force refresh now with -d date +%d/%m/%Y-date +%d/%m/%Y args, compress(on) and none action after sarg finish.
Sep 16 00:00:01 php: sarg.php: Sarg: force refresh now with -d date +%d/%m/%Y-date +%d/%m/%Y args, compress(on) and none action after sarg finish.

[2.1.5-RELEASE][admin@xxxxxx.localdomain]/root(1): sarg
SARG: Records in file: 50, reading: 100.00%
SARG: No records found
SARG: End

[2.1.5-RELEASE][admin@xxxxxx.localdomain]/root(5): pkg_info
bsdinstaller-2.0.2014.0410 BSD Installer mega-package
gettext-0.18.3.1 GNU gettext package
libiconv-1.14_1 A character set conversion library

[2.1.5-RELEASE][admin@xxxxx.localdomain]/root(6): sarg -x
SARG: Init
SARG: Loading configuration from /usr/pbi/sarg-i386/etc/sarg/sarg.conf
SARG: Loading exclude host file from: /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG: Loading exclude file from: /usr/pbi/sarg-i386/etc/sarg/exclude_users.conf
SARG: Reading host alias file "/usr/pbi/sarg-i386/etc/sarg/hostalias"
SARG: List of host names to alias:
SARG: Deleting temporary directory "/tmp/sarg"
SARG: Parameters:
SARG: Hostname or IP address (-a) =
SARG: Useragent log (-b) =
SARG: Exclude file (-c) = /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG: Date from-until (-d) =
SARG: Email address to send reports (-e) =
SARG: Config file (-f) = /usr/pbi/sarg-i386/etc/sarg/sarg.conf
SARG: Date format (-g) = USA (mm/dd/yyyy)
SARG: IP report (-i) = No
SARG: Keep temporary files (-k) = No
SARG: Input log (-l) = /var/squid/logs/access.log
SARG: Resolve IP Address (-n) = No
SARG: Output dir (-o) = /usr/local/sarg-reports/
SARG: Use Ip Address instead of userid (-p) = No
SARG: Accessed site (-s) =
SARG: Time (-t) =
SARG: User (-u) =
SARG: Temporary dir (-w) = /tmp/sarg
SARG: Debug messages (-x) = Yes
SARG: Process messages (-z) = No
SARG: Previous reports to keep (–lastlog) = 0
SARG:
SARG: sarg version: 2.3.6 Arp-21-2013
SARG: Reading access log file: /var/squid/logs/access.log
SARG: Records in file: 50, reading: 100.00%
SARG: Records read: 50, written: 0, excluded: 0
SARG: Squid log format
SARG: No records found
SARG: End

cat /usr/pbi/sarg-i386/etc/sarg/sarg.conf | more

sarg.conf

TAG: access_log file

# Where is the access.log
# sarg -l file

access_log /var/squid/logs/access.log

TAG: graphs yes|no

graphs yes
#graph_days_bytes_bar_color orange

TAG: graph_font

# The full path to the TTF font file to use to create the graphs. It is required
# if graphs is set to yes.

#graph_font /usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf

TAG: title

--More--(byte 529)# sarg.conf

ck42

Looks like Sarg is not working again.
Updated to 2.2 the other day. Sarg is the latest version available in packages (2.3.9 pkg v.0.6.4) and running squid (2.7.9 pkg v.4.3.6)

Attempting to run the Reports gives 'Could not find report index file.' message.
Trying to run Sarg from the CLI gives me 'Cannot set the locale LC_ALL to the environment variable'

Anyone have Sarg working with pf 2.2?

KOM

Doing a quick search for Sarg and picking a result a little more current would have led you to this thread here with a solution.

ck42

Funny that you refer to that thread, KOM. I had actually read through that prior to posting.
I had already tried creating the symlink on my system with no luck. That's why I wanted to know if anyone actually has this working with 2.2…hoping that they would confirm whether or not any special steps needed to be taken to make it work.

marcelloc

I have. I did only the symlink.

Try to run sarg on console to see what erros do you get.

If you install cron package, you can see how I call configured report schedule.

KOM

Cannot set the locale LC_ALL to the environment variable

I saw this on Solaris about 10 years ago. I forget what the fix was. Haven't seen it on 2.2 x64, and I've installed it many, many times. As Mercello said, run sarg or sarg -x from the console and see what it says.

marcelloc

@KOM:

Cannot set the locale LC_ALL to the environment variable

This is already applied to the package since pfSense 2.1 . Run an export before the sarg cmd.

 export LC_ALL=C && sarg...

ck42

$  export LC_ALL=C && sarg
SARG: Records in file: 0, reading: 0.00%
SARG: No records found
SARG: End
SARG: Records in file: 0, reading: 100.00%

$ sarg -x
SARG: Cannot set the locale LC_ALL to the environment variable

marcelloc

looks like you have no logs on squid file

sarg -x also need the export LC_ALL=C &&

ck42

@marcelloc:

looks like you have no logs on squid file

sarg -x also need the export LC_ALL=C &&

Not entirely following you by this suggestion. But I think you are wanting the output of this from?
sarg -x export LC_ALL=C &&

If so, the output just shows the same command entered (this is from the GUI). No error messages or anything else.

In looking at the log files in /var/squid/log, I noticed that all of the access.log files are EMPTY (0 byte files). The cache logs look normal though. Also, all the dates on the log files in that dir are current from the last few days.
I'm not sure how to proceed next though to troubleshoot this. Seems to me that this may be the issue (or at least part of it). Why are the access log files not accumulating data?

[EDIT] Might be on to something. I forced an update in a schedule and then noticed that the .0 access log is accumulating. The View Report tab also now no longer gives me the error about the index file.
So what I've done for a test is to disable the log rotation in the report settings. Log rotation is already set for 30 days in the Squid setup.

Still seeing " Cannot set the locale LC_ALL to the environment variable" when I try to run sarg -x though.

Something else that might be helpful from my system.

# LC_ALL=C sarg -x
SARG: Init
SARG: Loading configuration from /usr/local/etc/sarg/sarg.conf
SARG: Chaining IP resolving module "dns"
SARG: Loading exclude host file from: /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG: Loading exclude file from: /usr/pbi/sarg-i386/etc/sarg/exclude_users.conf
SARG: Reading host alias file "/usr/pbi/sarg-i386/etc/sarg/hostalias"
SARG: List of host names to alias:
SARG: Parameters:
SARG:           Hostname or IP address (-a) =
SARG:                    Useragent log (-b) =
SARG:                     Exclude file (-c) = /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG:                  Date from-until (-d) =
SARG:    Email address to send reports (-e) =
SARG:                      Config file (-f) = /usr/local/etc/sarg/sarg.conf
SARG:                      Date format (-g) = Sites & Users (yyyy/ww)
SARG:                        IP report (-i) = No
SARG:             Keep temporary files (-k) = No
SARG:                        Input log (-l) = /var/squid/logs/access.log
SARG:               Resolve IP Address (-n) = Yes
SARG:                       Output dir (-o) = /usr/local/sarg-reports/
SARG: Use Ip Address instead of userid (-p) = Yes
SARG:                    Accessed site (-s) =
SARG:                             Time (-t) =
SARG:                             User (-u) =
SARG:                    Temporary dir (-w) = /tmp/sarg
SARG:                   Debug messages (-x) = Yes
SARG:                 Process messages (-z) = No
SARG:  Previous reports to keep (--lastlog) = 0
SARG:
SARG: sarg version: 2.3.9 Sep-21-2014
SARG: Loading User table: /usr/pbi/sarg-i386/etc/sarg/usertab.conf
SARG: Reading access log file: /var/squid/logs/access.log
SARG: Records in file: 174, reading: 100.00%
SARG:    Records read: 174, written: 174, excluded: 0
SARG: Squid log format
SARG: Period: 2015.05
SARG: Sorting log /tmp/sarg/0.user_unsort
SARG: Sorting log /tmp/sarg/1.user_unsort
SARG: Sorting log /tmp/sarg/2.user_unsort
SARG: (repday) Cannot open log file /usr/local/sarg-reports/2015.05/0/d0.html

Regarding that very last line of output, here's what in the 2015.05 directory:

# ls -la /usr/local/sarg-reports/2015.05
total 18
drwxr-xr-x  2 root  wheel   512 Feb  4 11:54 .
drwxr-xr-x  5 root  wheel   512 Feb  4 11:54 ..
-rw-r--r--  1 root  wheel  4437 Feb  4 11:54 index.html
-rw-r--r--  1 root  wheel    22 Feb  4 11:54 sarg-date
-rw-r--r--  1 root  wheel  1398 Feb  4 11:54 sarg-general
-rw-r--r--  1 root  wheel     2 Feb  4 11:54 sarg-users
-rw-r--r--  1 root  wheel   116 Feb  4 11:54 top

So it's correct in that there's no "0" directory in which to find the d0.html file it's looking for.
A system wide search for this file DOES show that a copy exist here though.
/usr/pbi/sarg-i386/local/sarg-reports/2015.01.1/0/d0.html

And lastly, the Realtime logging appears to be working correctly.

marcelloc

@ck42:

Not entirely following you by this suggestion. But I think you are wanting the output of this from?
sarg -x export LC_ALL=C &&

export LC_ALL=C && sarg -x

ck42

@marcelloc:

@ck42:

Not entirely following you by this suggestion. But I think you are wanting the output of this from?
sarg -x export LC_ALL=C &&

export LC_ALL=C && sarg -x

Here we go:

$ export LC_ALL=C && sarg -x
SARG: Init
SARG: Loading configuration from /usr/local/etc/sarg/sarg.conf
SARG: Chaining IP resolving module "dns"
SARG: Loading exclude host file from: /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG: Loading exclude file from: /usr/pbi/sarg-i386/etc/sarg/exclude_users.conf
SARG: Reading host alias file "/usr/pbi/sarg-i386/etc/sarg/hostalias"
SARG: List of host names to alias:
SARG: Deleting temporary directory "/tmp/sarg"
SARG: Parameters:
SARG:           Hostname or IP address (-a) = 
SARG:                    Useragent log (-b) = 
SARG:                     Exclude file (-c) = /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf
SARG:                  Date from-until (-d) = 
SARG:    Email address to send reports (-e) = 
SARG:                      Config file (-f) = /usr/local/etc/sarg/sarg.conf
SARG:                      Date format (-g) = USA (mm/dd/yyyy)
SARG:                        IP report (-i) = No
SARG:             Keep temporary files (-k) = No
SARG:                        Input log (-l) = /var/squid/logs/access.log
SARG:               Resolve IP Address (-n) = Yes
SARG:                       Output dir (-o) = /usr/local/sarg-reports/
SARG: Use Ip Address instead of userid (-p) = Yes
SARG:                    Accessed site (-s) = 
SARG:                             Time (-t) = 
SARG:                             User (-u) = 
SARG:                    Temporary dir (-w) = /tmp/sarg
SARG:                   Debug messages (-x) = Yes
SARG:                 Process messages (-z) = No
SARG:  Previous reports to keep (--lastlog) = 0
SARG: 
SARG: sarg version: 2.3.9 Sep-21-2014
SARG: Loading User table: /usr/pbi/sarg-i386/etc/sarg/usertab.conf
SARG: Reading access log file: /var/squid/logs/access.log
SARG: Records in file: 1042, reading: 0.00%
SARG:    Records read: 1042, written: 1042, excluded: 0
SARG: Squid log format
SARG: Period: 2015 Feb 04
SARG: File /usr/local/sarg-reports/2015Feb04-2015Feb04 already exists, moved to /usr/local/sarg-reports/2015Feb04-2015Feb04.2
SARG: Sorting log /tmp/sarg/0.user_unsort
SARG: Making file: /tmp/sarg/0
SARG: Sorting log /tmp/sarg/1.user_unsort
SARG: Making file: /tmp/sarg/1
SARG: Sorting log /tmp/sarg/2.user_unsort
SARG: Making file: /tmp/sarg/2
SARG: Sorting log /tmp/sarg/3.user_unsort
SARG: Making file: /tmp/sarg/3
SARG: Sorting log /tmp/sarg/4.user_unsort
SARG: Making file: /tmp/sarg/4
SARG: Sorting log /tmp/sarg/5.user_unsort
SARG: Making file: /tmp/sarg/5
SARG: Sorting log /tmp/sarg/6.user_unsort
SARG: Making file: /tmp/sarg/6
SARG: (repday) Cannot open log file /usr/local/sarg-reports/2015Feb04-2015Feb04/5/d5.html
SARG: Records in file: 1042, reading: 100.00%

KOM

OK, making progress. Sarg seems to be one of the more fragile packages. If you happen to select the wrong report options or report to generate, it won't work. Here is what I use and it seems to work OK:

sarg.png_thumb

ck42

KOM: That's pretty odd that something like the chosen report selection is causing this…but that was issue! :o
Is this a bug or is this something that is out of Sarg's control?

BTW: Thank you both, KOM and marcelloc!!

KOM

Is this a bug or is this something that is out of Sarg's control?

Probably a bug in the pfSense Sarg package. Sarg is currently at 2.3.9 while the pfSense package is 2.3.6 so it's 1.5 years older, and as far as I know it's always acted funky like that. Pick the wrong report and the whole thing falls over.

Glad to hear you got it working.

Cino

looks like its using 2.3.9 on 2.2

https://github.com/pfsense/pfsense-packages/blob/master/pkg_config.10.xml

<depends_on_package_pbi>sarg-2.3.9-##ARCH##.pbi</depends_on_package_pbi>

I haven't downloaded the package myself yet on 2.2

KOM

I must have been looking at my 2.1.5 box.