Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    2.1.5 to 2.2 BETA

    Scheduled Pinned Locked Moved 2.2 Snapshot Feedback and Problems - RETIRED
    27 Posts 6 Posters 5.6k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • W
      wbennett77
      last edited by

      Thanks for the responses. I am using pfBlocker, OpenVpn Client and Snort. Is anyone having any problems with these packages on 2.2?

      Thanks!

      Dell Optiplex 390 Pfsense 2.2 / Asus AC56U Wireless AP / Asus Switch

      1 Reply Last reply Reply Quote 0
      • C
        cmb
        last edited by

        Those packages all work.

        1 Reply Last reply Reply Quote 0
        • X
          xbipin
          last edited by

          here are some errors that showed up in serial console after upgrading

          NanoBSD Firmware upgrade is complete.  Rebooting in 10 seconds.
          
          *** FINAL System shutdown message from root@ ***
          
          System going down IMMEDIATELY
          
          pfSense is now shutting down ...
          
          ovpnc1: link state changed to DOWN
          pflog0: promiscuous mode enabled
          pflog0: promiscuous mode disabled
          Waiting (max 60 seconds) for system process `vnlru' to stop...done
          Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
          Waiting (max 60 seconds) for system process `syncer' to stop...
          Syncing disks, vnodes remaining...0 0 done
          All buffers synced.
          Uptime: 23h34m15s
          usbus0: Controller shutdown
          usbus0: Controller shutdown complete
          usbus1: Controller shutdown
          usbus1: Controller shutdown complete
          Rebooting...
          PC Engines ALIX.2 v0.99h
          640 KB Base Memory
          261120 KB Extended Memory
          
          01F0 Master 044A CF 1GB
          Phys C/H/S 2015/16/63 Log C/H/S 1007/32/63
          
          1  pfSense
          2  pfSense
          
          F6 PXE
          Boot:  2
          \ô´ÿ÷ßÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ‚AƒÃÿûÿÿÿÿ›W
          öÊa×ӁW#Áÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
          ÿÿÿTÕÔÿÿÿÿÿÿÿÿÿÿÿÿ/boot/kernel/kernel text=0x11ef588 data=0x832d70+0x279e60 syms
          =[0x4+0xf3410+0x4+0x16b437]
          
          Hit [Enter] to boot immediately, or any other key for command prompt.
          Booting [/boot/kernel/kernel]...
          KDB: debugger backends: ddb
          KDB: current backend: ddb
          Copyright (c) 1992-2014 The FreeBSD Project.
          Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                  The Regents of the University of California. All rights reserved.
          FreeBSD is a registered trademark of The FreeBSD Foundation.
          FreeBSD 10.1-RELEASE #0 29f4af5(releng/10.1)-dirty: Thu Dec  4 09:01:35 CST 2014
              root@pfsense-22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_wr
          ap.10.i386 i386
          FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
          VT: running with driver "vga".
          CPU: Geode(TM) Integrated Processor by AMD PCS (498.06-MHz 586-class CPU)
            Origin = "AuthenticAMD"  Id = 0x5a2  Family = 0x5  Model = 0xa  Stepping = 2
            Features=0x88a93d <fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx>AMD Features=0xc0400000 <mmx+,3dnow!+,3dnow!>real memory  = 268435456 (256 MB)
          avail memory = 226209792 (215 MB)
          pnpbios: Bad PnP BIOS data checksum
          random device not loaded; using insecure entropy
          ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
          ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /bo
          ot/loader.conf.
          module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0809390, 0) error 1
          ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
          ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /b
          oot/loader.conf.
          module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0809440, 0) error 1
          ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw
          /.
          ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in
           /boot/loader.conf.
          module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc08094f0, 0) error 1
          iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
          iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /bo
          ot/loader.conf.
          module_register_init: MOD_LOAD (iwi_bss_fw, 0xc0831b20, 0) error 1
          iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
          iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /b
          oot/loader.conf.
          module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc0831bd0, 0) error 1
          iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi
          /.
          iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in
           /boot/loader.conf.
          module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc0831c80, 0) error 1
          wlan: mac acl policy registered
          kbd0 at kbdmux0
          K6-family MTRR support enabled (2 registers)
          random: <software, yarrow="">initialized
          ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223)
          ACPI: Table initialisation failed: AE_NOT_FOUND
          ACPI: Try disabling either ACPI or apic support.
          cryptosoft0: <software crypto="">on motherboard
          padlock0: No ACE support.
          pcib0 pcibus 0 on motherboard
          pci0: <pci bus="">on pcib0
          Geode LX: PC Engines ALIX.2 v0.99h tinyBIOS V1.4a (C)1997-2007
          pci0: <encrypt decrypt,="" entertainment="" crypto="">at device 1.2 (no driver attached)
          vr0: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1000-0x10ff mem 0xe0000000-0xe0
          0000ff irq 10 at device 9.0 on pci0
          vr0: Quirks: 0x2
          vr0: Revision: 0x96
          miibus0: <mii bus="">on vr0
          ukphy0: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus0
          ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
          vr1: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1400-0x14ff mem 0xe0040000-0xe0
          0400ff irq 11 at device 10.0 on pci0
          vr1: Quirks: 0x2
          vr1: Revision: 0x96
          miibus1: <mii bus="">on vr1
          ukphy1: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus1
          ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
          vr2: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1800-0x18ff mem 0xe0080000-0xe0
          0800ff irq 15 at device 11.0 on pci0
          vr2: Quirks: 0x2
          vr2: Revision: 0x96
          miibus2: <mii bus="">on vr2
          ukphy2: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus2
          ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
          ath0: <atheros 5413="">mem 0xe00c0000-0xe00cffff irq 9 at device 12.0 on pci0
          ath0: AR5413 mac 10.5 RF5413 phy 6.1
          ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0063
          isab0: <pci-isa bridge="">port 0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x
          9d7f,0x9c00-0x9c3f at device 15.0 on pci0
          isa0: <isa bus="">on isab0
          atapci0: <amd cs5536="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
          6,0xff00-0xff0f at device 15.2 on pci0
          ata0: <ata channel="">at channel 0 on atapci0
          ata1: <ata channel="">at channel 1 on atapci0
          ohci0: <ohci (generic)="" usb="" controller="">mem 0xefffe000-0xefffefff irq 12 at devic
          e 15.4 on pci0
          usbus0 on ohci0
          ehci0: <amd cs5536="" (geode)="" usb="" 2.0="" controller="">mem 0xefffd000-0xefffdfff irq 12
          at device 15.5 on pci0
          usbus1: EHCI version 1.0
          usbus1 on ehci0
          cpu0 on motherboard
          pmtimer0 on isa0
          orm0: <isa option="" rom="">at iomem 0xe0000-0xea7ff pnpid ORM0000 on isa0
          atrtc0: <at realtime="" clock="">at port 0x70 irq 8 on isa0
          Event timer "RTC" frequency 32768 Hz quality 0
          attimer0: <at timer="">at port 0x40 on isa0
          Timecounter "i8254" frequency 1193182 Hz quality 0
          Event timer "i8254" frequency 1193182 Hz quality 100
          ppc0: parallel port not found.
          uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
          uart0: console (9600,n,8,1)
          uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
          Timecounters tick every 1.000 msec
          IPsec: Initialized Security Association Processing.
          usbus0: 12Mbps Full Speed USB v1.0
          usbus1: 480Mbps High Speed USB v2.0
          ugen0.1: <amd>at usbus0
          uhub0: <amd 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
          ugen1.1: <amd>at usbus1
          uhub1: <amd 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1
          ada0 at ata0 bus 0 scbus0 target 0 lun 0
          ada0: <cf 20071116="" 1gb="">ATA-0 device
          ada0: Serial Number TSS20036081218011525
          ada0: 16.700MB/s transfers (PIO4, PIO 512bytes)
          ada0: 991MB (2031120 512 byte sectors: 16H 63S/T 2015C)
          ada0: Previously was known as ad0
          random: unblocking device.
          Timecounter "TSC" frequency 498060762 Hz quality 800
          uhub0: 4 ports with 4 removable, self powered
          Root mount waiting for: usbus1
          Root mount waiting for: usbus1
          uhub1: 4 ports with 4 removable, self powered
          Trying to mount root from ufs:/dev/ufs/pfsense1 [ro]...
          Configuring crash dumps...
          Mounting filesystems...
          Setting up memory disks... done.
          
               ___
           ___/ f \
          / p \___/ Sense
          \___/   \
              \___/
          
          Welcome to pfSense 2.2-BETA  ...
          
          Creating symlinks......ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/loc
          al/lib
          a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
          done.
          >>> Under 512 megabytes of ram detected.  Not enabling APC.
          External config loader 1.0 is now starting...
          Launching the init system... done.
          Initializing...................... done.
          Starting device manager (devd)...done.
          Loading configuration......done.
          Updating configuration..................done.
          Cleaning backup cache...done.
          Setting up extended sysctls...sysctl: empty numeric value
          sysctl: oid 'hw.bce.tso_enable' is a read only tunable
          sysctl: Tunable values are set in /boot/loader.conf
          sysctl: empty numeric value
          sysctl: oid 'hw.bce.tso_enable' is a read only tunable
          sysctl: Tunable values are set in /boot/loader.conf
          done.
          Setting timezone...done.
          Configuring loopback interface...done.
          Starting syslog...done.
          Starting Secure Shell Services...done.
          Setting up polling defaults...done.
          Setting up interfaces microcode...done.
          Configuring loopback interface...done.
          Creating wireless clone interfaces...done.
          Configuring LAGG interfaces...done.
          Configuring VLAN interfaces...done.
          Configuring QinQ interfaces...done.
          Configuring WAN interface...done.
          Configuring LAN interface...done.
          Configuring CARP settings...done.
          Syncing OpenVPN settings...done.
          Configuring firewall..DUMMYNET 0 with IPv6 initialized (100409)
          load_dn_sched dn_sched FIFO loaded
          load_dn_sched dn_sched QFQ loaded
          load_dn_sched dn_sched RR loaded
          load_dn_sched dn_sched WF2Q+ loaded
          load_dn_sched dn_sched PRIO loaded
          ....done.
          Starting PFLOG...done.
          Setting up gateway monitors...done.
          Synchronizing user settings...done.
          Starting webConfigurator...done.
          Configuring CRON...done.
          Starting DNS forwarder...done.
          Starting NTP time client...done.
          Starting DHCP service...done.
          Configuring firewall......done.
          Generating RRD graphs...done.
          kldload: can't load cpufreq: No such file or directory
          One moment please, reinstalling packages...
           >>> Trying to fetch package info...
           >>> Unable to communicate with https://packages.pfsense.org. Please verify DNS
          and interface configuration, and that pfSense has functional Internet connectivi
          ty.
          Starting syslog...done.
          Starting CRON... done.
           Starting package Cron...
          
          done.
          pfSense (nanobsd) 2.2-BETA i386 Thu Dec 04 08:23:23 CST 2014
          Bootup complete
          
          FreeBSD/i386 (firewall) (ttyu0)
          
          *** Welcome to pfSense 2.2-BETA-nanobsd (i386) on firewall ***</cf></amd></amd></amd></amd></at></at></isa></amd></ohci></ata></ata></amd></isa></pci-isa></atheros></generic></mii></via></generic></mii></via></generic></mii></via></encrypt></pci></software></software,></mmx+,3dnow!+,3dnow!></fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx> 
          
          1 Reply Last reply Reply Quote 0
          • X
            xbipin
            last edited by

            notice the broken text after boot: 2 and other symlink and sysctl errors.
            even cron doesnt install after upgrade, tried manually installing it but says installation halted

            1 Reply Last reply Reply Quote 0
            • X
              xbipin
              last edited by

              cron install log

              Beginning package installation for Cron .
              Downloading package configuration file... done.
              Saving updated package information... done.
              Downloading Cron and its dependencies... 
              Loading package configuration... done.
              Configuring package components...
              Loading package configuration... done.
              Additional files... cron.inc failed.
              Loading package instructions...
              Include cron.inc is missing!
              Removing package...
              Removing Cron components...
              Tabs items... done.
              Menu items... done.
              Services... done.
              Loading package instructions...
              Include file cron.inc could not be found for inclusion.
              Deinstall commands... 
              Not executing custom deinstall hook because an include is missing.
              Removing package instructions...done.
              Auxiliary files... done.
              Package XML... done.
              Configuration... done.
              done.
              Failed to install package.
              
              Installation halted.
              

              systemlog says this

              Dec 7 10:29:37 	php-fpm[23690]: /pkg_mgr_install.php: XML_RPC_Client: Connection to RPC server packages.pfsense.org:443 failed. Operation timed out 103
              Dec 7 10:29:37 	php-fpm[23690]: /pkg_mgr_install.php: XMLRPC communication error: Operation timed out
              
              1 Reply Last reply Reply Quote 0
              • X
                xbipin
                last edited by

                other minor aesthetic bug i noticed in serial console was, after finishing boot, it usually lists all the interfaces with their ips and then the serial console option list but misses a empty line between the interface list and console options

                *** Welcome to pfSense 2.2-BETA-nanobsd (i386) on firewall ***
                
                 WAN (wan)       -> pppoe0     -> v4/PPPoE: x.x.x.x/32
                 LAN (lan)       -> vr0        -> v4: 192.168.0.1/24
                 VPN (opt2)      -> ovpnc1     -> v4: 10.13.0.6/32
                 0) Logout (SSH only)                  9) pfTop
                 1) Assign Interfaces                 10) Filter Logs
                 2) Set interface(s) IP address       11) Restart webConfigurator
                 3) Reset webConfigurator password    12) pfSense Developer Shell
                 4) Reset to factory defaults         13) Upgrade from console
                 5) Reboot system                     14) Enable Secure Shell (sshd)
                 6) Halt system                       15) Restore recent configuration
                 7) Ping host                         16) Restart PHP-FPM
                 8) Shell
                
                Enter an option:
                
                1 Reply Last reply Reply Quote 0
                • W
                  wbennett77
                  last edited by

                  @phil.davis:

                  Right now the first 2.2-RC is being made, so I would wait just a little while (1 day, or maybe hours?). There should be a post at the top of this forum to announce where you can update from - i.e. what to put in System->Firmware, Updater Settings, Firmware Auto Update URL…

                  Just wondering what I will see using the Firmware Auto Update URL? Will it simply download and install the upgrade and just reboot into the GUI where I would just login and go? Are any settings/packages lost? Do I need to uninstall any packages before the upgrade? Sorry for all the questions and thanks for your help.

                  Dell Optiplex 390 Pfsense 2.2 / Asus AC56U Wireless AP / Asus Switch

                  1 Reply Last reply Reply Quote 0
                  • P
                    phil.davis
                    last edited by

                    other minor aesthetic bug i noticed in serial console was, after finishing boot, it usually lists all the interfaces with their ips and then the serial console option list but misses a empty line between the interface list and console options

                    That blank line was removed in this commit:
                    https://github.com/pfsense/pfsense/commit/a3cc8dcc600d105d73eb4729c32433d40d72cab7
                    I have no idea if it was really intentional - 2 (echo "") were needed to make a blank line, the first one just puts a new line at the end of the rc.banner output and list of interfaces, the 2nd one made the blank line.

                    As the Greek philosopher Isosceles used to say, "There are 3 sides to every triangle."
                    If I helped you, then help someone else - buy someone a gift from the INF catalog http://secure.inf.org/gifts/usd/

                    1 Reply Last reply Reply Quote 0
                    • P
                      phil.davis
                      last edited by

                      Just wondering what I will see using the Firmware Auto Update URL? Will it simply download and install the upgrade and just reboot into the GUI where I would just login and go? Are any settings/packages lost? Do I need to uninstall any packages before the upgrade? Sorry for all the questions and thanks for your help.

                      It runs like any normal upgrade - download and install of base firmware image, reboot, download and (re)install all packages.
                      You should be able to just do it - make a backup first, other than that no special preparation needed.

                      As the Greek philosopher Isosceles used to say, "There are 3 sides to every triangle."
                      If I helped you, then help someone else - buy someone a gift from the INF catalog http://secure.inf.org/gifts/usd/

                      1 Reply Last reply Reply Quote 0
                      • W
                        wbennett77
                        last edited by

                        @phil.davis:

                        Just wondering what I will see using the Firmware Auto Update URL? Will it simply download and install the upgrade and just reboot into the GUI where I would just login and go? Are any settings/packages lost? Do I need to uninstall any packages before the upgrade? Sorry for all the questions and thanks for your help.

                        It runs like any normal upgrade - download and install of base firmware image, reboot, download and (re)install all packages.
                        You should be able to just do it - make a backup first, other than that no special preparation needed.

                        One last question. How large is/are the download files? I have 15Mbps down and would like to have an idea how long the whole process might take (Have to keep the wife happy lol and she wll be out for awhile).

                        Thanks!

                        Dell Optiplex 390 Pfsense 2.2 / Asus AC56U Wireless AP / Asus Switch

                        1 Reply Last reply Reply Quote 0
                        • P
                          phil.davis
                          last edited by

                          http://snapshots.pfsense.org/FreeBSD_releng/10.1/amd64/pfSense_HEAD/updates/?C=M;O=D
                          76MB for the nanoBSD upgrade
                          86MB for the full install upgrade

                          Internet still works during the download. (Of course, slowed by the fact that pfSense is downloading in parallel with users) It is only the reboot and package install time that really takes you off-line.

                          As the Greek philosopher Isosceles used to say, "There are 3 sides to every triangle."
                          If I helped you, then help someone else - buy someone a gift from the INF catalog http://secure.inf.org/gifts/usd/

                          1 Reply Last reply Reply Quote 0
                          • W
                            wbennett77
                            last edited by

                            @phil.davis:

                            http://snapshots.pfsense.org/FreeBSD_releng/10.1/amd64/pfSense_HEAD/updates/?C=M;O=D
                            76MB for the nanoBSD upgrade
                            86MB for the full install upgrade

                            Internet still works during the download. (Of course, slowed by the fact that pfSense is downloading in parallel with users) It is only the reboot and package install time that really takes you off-line.

                            Does the install automatically detect the install type? I have a full install amd64.

                            Update: The installation was flawless and I am very happy. The new firmware seems snappier. My first impression :) :) :)!

                            Update2 - To show my respect, support and appreciation for this project, I just became a Gold Member.

                            Cheers!

                            Dell Optiplex 390 Pfsense 2.2 / Asus AC56U Wireless AP / Asus Switch

                            1 Reply Last reply Reply Quote 0
                            • X
                              xbipin
                              last edited by

                              @phil.davis:

                              other minor aesthetic bug i noticed in serial console was, after finishing boot, it usually lists all the interfaces with their ips and then the serial console option list but misses a empty line between the interface list and console options

                              That blank line was removed in this commit:
                              https://github.com/pfsense/pfsense/commit/a3cc8dcc600d105d73eb4729c32433d40d72cab7
                              I have no idea if it was really intentional - 2 (echo "") were needed to make a blank line, the first one just puts a new line at the end of the rc.banner output and list of interfaces, the 2nd one made the blank line.

                              well the blank lines just made it look more pretty and well formated, i vote for it to return  :)

                              1 Reply Last reply Reply Quote 0
                              • X
                                xbipin
                                last edited by

                                other issues im facing as of now is the SSH daemon wont start at all, on reboot i get announcement that ssh keys will be created but then when i goto services the daemon wont start at all

                                1 Reply Last reply Reply Quote 0
                                • X
                                  xbipin
                                  last edited by

                                  some more bugs under system->advanced->System Tunables
                                  the list shows the entries with just default without the actual default value and that's causing sysctl errors in the boot process saying non zero values and im guessing if u remove some values it doesnt restore the default list which is present on a fresh install

                                  1 Reply Last reply Reply Quote 0
                                  • X
                                    xbipin
                                    last edited by

                                    @xbipin:

                                    some more bugs under system->advanced->System Tunables
                                    the list shows the entries with just default without the actual default value and that's causing sysctl errors in the boot process saying non zero values and im guessing if u remove some values it doesnt restore the default list which is present on a fresh install

                                    i figured out what the issue with this, in older pfsense the default entries r stored in config with value as default which when upgraded make the system think to take value as default and thats y the non zero error, what i did is delete those entries and rebooted and the newer pfsense recreated the same with their actual default values rather than just showing and storing default in the config

                                    1 Reply Last reply Reply Quote 0
                                    • W
                                      wbennett77
                                      last edited by

                                      Upgraded to 2.2-BETA on the weekend and have received this crash message:

                                      Crash report details:

                                      PHP Errors:
                                      in /usr/local/pkg/pfblocker.inc on line 253

                                      I submitted the report but not sure if there is something I can do to fix the problem.

                                      Dell Optiplex 390 Pfsense 2.2 / Asus AC56U Wireless AP / Asus Switch

                                      1 Reply Last reply Reply Quote 0
                                      • BBcan177B
                                        BBcan177 Moderator
                                        last edited by

                                        @wbennett77:

                                        Upgraded to 2.2-BETA on the weekend and have received this crash message:

                                        Crash report details:

                                        PHP Errors:
                                        in /usr/local/pkg/pfblocker.inc on line 253

                                        I submitted the report but not sure if there is something I can do to fix the problem.

                                        Hi wbennett77,

                                        Do you get this error often? Is it a particular list that is failing?

                                        You can suppress the error by adding an "@" in line 253 as follows :

                                        $url_list= @gzfile($row['url']);

                                        "Experience is something you don't get until just after you need it."

                                        Website: http://pfBlockerNG.com
                                        Twitter: @BBcan177  #pfBlockerNG
                                        Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                                        1 Reply Last reply Reply Quote 0
                                        • W
                                          wbennett77
                                          last edited by

                                          @BBcan177:

                                          @wbennett77:

                                          Upgraded to 2.2-BETA on the weekend and have received this crash message:

                                          Crash report details:

                                          PHP Errors:
                                          in /usr/local/pkg/pfblocker.inc on line 253

                                          I submitted the report but not sure if there is something I can do to fix the problem.

                                          Hi wbennett77,

                                          Do you get this error often? Is it a particular list that is failing?

                                          You can suppress the error by adding an "@" in line 253 as follows :

                                          $url_list= @gzfile($row['url']);

                                          I get the error constantly. Anytime I log in to the dashboard the error appears. Anytime I go to one of the other menu areas and then come back to the dashboard the error appears. I have tried reinstalling Pfblocker with no change. Pfblocker has also disabled itself a couple of times and on other occasions a certain list becomes disabled. This would seem to be an error that is causing problems with the package.

                                          I am curious. I am using a couple of lists from I-Blocklist in the CIDR file format and gz archive format. Would this have any effect? This was all working in 2.15.

                                          Thanks!

                                          Dell Optiplex 390 Pfsense 2.2 / Asus AC56U Wireless AP / Asus Switch

                                          1 Reply Last reply Reply Quote 0
                                          • P
                                            phil.davis
                                            last edited by

                                            This should really be a separate topic!
                                            Look in your config for $config['installedpackages']['pfblockerlists']['config'] (Diagnostics->Edit File, /cf/conf/config.xml - look for pfblockerlists and config under that and row and url under that. config.xml is in XML format.) Those should point to some files. In the file/s there will be loads of URLs…
                                            I guess one of those files has a huge number of entries and it is exploding PHP memory.

                                            As the Greek philosopher Isosceles used to say, "There are 3 sides to every triangle."
                                            If I helped you, then help someone else - buy someone a gift from the INF catalog http://secure.inf.org/gifts/usd/

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.