2.1.5 to 2.2 BETA
-
here are some errors that showed up in serial console after upgrading
NanoBSD Firmware upgrade is complete. Rebooting in 10 seconds. *** FINAL System shutdown message from root@ *** System going down IMMEDIATELY pfSense is now shutting down ... ovpnc1: link state changed to DOWN pflog0: promiscuous mode enabled pflog0: promiscuous mode disabled Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 done All buffers synced. Uptime: 23h34m15s usbus0: Controller shutdown usbus0: Controller shutdown complete usbus1: Controller shutdown usbus1: Controller shutdown complete Rebooting... PC Engines ALIX.2 v0.99h 640 KB Base Memory 261120 KB Extended Memory 01F0 Master 044A CF 1GB Phys C/H/S 2015/16/63 Log C/H/S 1007/32/63 1 pfSense 2 pfSense F6 PXE Boot: 2 \ô´ÿ÷ßÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ‚AƒÃÿûÿÿÿÿ›W öÊa×ÓW#Áÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿTÕÔÿÿÿÿÿÿÿÿÿÿÿÿ/boot/kernel/kernel text=0x11ef588 data=0x832d70+0x279e60 syms =[0x4+0xf3410+0x4+0x16b437] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.1-RELEASE #0 29f4af5(releng/10.1)-dirty: Thu Dec 4 09:01:35 CST 2014 root@pfsense-22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_wr ap.10.i386 i386 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 VT: running with driver "vga". CPU: Geode(TM) Integrated Processor by AMD PCS (498.06-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x5a2 Family = 0x5 Model = 0xa Stepping = 2 Features=0x88a93d <fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx>AMD Features=0xc0400000 <mmx+,3dnow!+,3dnow!>real memory = 268435456 (256 MB) avail memory = 226209792 (215 MB) pnpbios: Bad PnP BIOS data checksum random device not loaded; using insecure entropy ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /bo ot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0809390, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /b oot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0809440, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw /. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc08094f0, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /bo ot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xc0831b20, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /b oot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc0831bd0, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi /. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc0831c80, 0) error 1 wlan: mac acl policy registered kbd0 at kbdmux0 K6-family MTRR support enabled (2 registers) random: <software, yarrow="">initialized ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. cryptosoft0: <software crypto="">on motherboard padlock0: No ACE support. pcib0 pcibus 0 on motherboard pci0: <pci bus="">on pcib0 Geode LX: PC Engines ALIX.2 v0.99h tinyBIOS V1.4a (C)1997-2007 pci0: <encrypt decrypt,="" entertainment="" crypto="">at device 1.2 (no driver attached) vr0: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1000-0x10ff mem 0xe0000000-0xe0 0000ff irq 10 at device 9.0 on pci0 vr0: Quirks: 0x2 vr0: Revision: 0x96 miibus0: <mii bus="">on vr0 ukphy0: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow vr1: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1400-0x14ff mem 0xe0040000-0xe0 0400ff irq 11 at device 10.0 on pci0 vr1: Quirks: 0x2 vr1: Revision: 0x96 miibus1: <mii bus="">on vr1 ukphy1: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus1 ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow vr2: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1800-0x18ff mem 0xe0080000-0xe0 0800ff irq 15 at device 11.0 on pci0 vr2: Quirks: 0x2 vr2: Revision: 0x96 miibus2: <mii bus="">on vr2 ukphy2: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus2 ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow ath0: <atheros 5413="">mem 0xe00c0000-0xe00cffff irq 9 at device 12.0 on pci0 ath0: AR5413 mac 10.5 RF5413 phy 6.1 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0063 isab0: <pci-isa bridge="">port 0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x 9d7f,0x9c00-0x9c3f at device 15.0 on pci0 isa0: <isa bus="">on isab0 atapci0: <amd cs5536="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37 6,0xff00-0xff0f at device 15.2 on pci0 ata0: <ata channel="">at channel 0 on atapci0 ata1: <ata channel="">at channel 1 on atapci0 ohci0: <ohci (generic)="" usb="" controller="">mem 0xefffe000-0xefffefff irq 12 at devic e 15.4 on pci0 usbus0 on ohci0 ehci0: <amd cs5536="" (geode)="" usb="" 2.0="" controller="">mem 0xefffd000-0xefffdfff irq 12 at device 15.5 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 cpu0 on motherboard pmtimer0 on isa0 orm0: <isa option="" rom="">at iomem 0xe0000-0xea7ff pnpid ORM0000 on isa0 atrtc0: <at realtime="" clock="">at port 0x70 irq 8 on isa0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <at timer="">at port 0x40 on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 ppc0: parallel port not found. uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <amd>at usbus0 uhub0: <amd 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0 ugen1.1: <amd>at usbus1 uhub1: <amd 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1 ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <cf 20071116="" 1gb="">ATA-0 device ada0: Serial Number TSS20036081218011525 ada0: 16.700MB/s transfers (PIO4, PIO 512bytes) ada0: 991MB (2031120 512 byte sectors: 16H 63S/T 2015C) ada0: Previously was known as ad0 random: unblocking device. Timecounter "TSC" frequency 498060762 Hz quality 800 uhub0: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 Root mount waiting for: usbus1 uhub1: 4 ports with 4 removable, self powered Trying to mount root from ufs:/dev/ufs/pfsense1 [ro]... Configuring crash dumps... Mounting filesystems... Setting up memory disks... done. ___ ___/ f \ / p \___/ Sense \___/ \ \___/ Welcome to pfSense 2.2-BETA ... Creating symlinks......ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/loc al/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout done. >>> Under 512 megabytes of ram detected. Not enabling APC. External config loader 1.0 is now starting... Launching the init system... done. Initializing...................... done. Starting device manager (devd)...done. Loading configuration......done. Updating configuration..................done. Cleaning backup cache...done. Setting up extended sysctls...sysctl: empty numeric value sysctl: oid 'hw.bce.tso_enable' is a read only tunable sysctl: Tunable values are set in /boot/loader.conf sysctl: empty numeric value sysctl: oid 'hw.bce.tso_enable' is a read only tunable sysctl: Tunable values are set in /boot/loader.conf done. Setting timezone...done. Configuring loopback interface...done. Starting syslog...done. Starting Secure Shell Services...done. Setting up polling defaults...done. Setting up interfaces microcode...done. Configuring loopback interface...done. Creating wireless clone interfaces...done. Configuring LAGG interfaces...done. Configuring VLAN interfaces...done. Configuring QinQ interfaces...done. Configuring WAN interface...done. Configuring LAN interface...done. Configuring CARP settings...done. Syncing OpenVPN settings...done. Configuring firewall..DUMMYNET 0 with IPv6 initialized (100409) load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched PRIO loaded ....done. Starting PFLOG...done. Setting up gateway monitors...done. Synchronizing user settings...done. Starting webConfigurator...done. Configuring CRON...done. Starting DNS forwarder...done. Starting NTP time client...done. Starting DHCP service...done. Configuring firewall......done. Generating RRD graphs...done. kldload: can't load cpufreq: No such file or directory One moment please, reinstalling packages... >>> Trying to fetch package info... >>> Unable to communicate with https://packages.pfsense.org. Please verify DNS and interface configuration, and that pfSense has functional Internet connectivi ty. Starting syslog...done. Starting CRON... done. Starting package Cron... done. pfSense (nanobsd) 2.2-BETA i386 Thu Dec 04 08:23:23 CST 2014 Bootup complete FreeBSD/i386 (firewall) (ttyu0) *** Welcome to pfSense 2.2-BETA-nanobsd (i386) on firewall ***</cf></amd></amd></amd></amd></at></at></isa></amd></ohci></ata></ata></amd></isa></pci-isa></atheros></generic></mii></via></generic></mii></via></generic></mii></via></encrypt></pci></software></software,></mmx+,3dnow!+,3dnow!></fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx> -
notice the broken text after boot: 2 and other symlink and sysctl errors.
even cron doesnt install after upgrade, tried manually installing it but says installation halted -
cron install log
Beginning package installation for Cron . Downloading package configuration file... done. Saving updated package information... done. Downloading Cron and its dependencies... Loading package configuration... done. Configuring package components... Loading package configuration... done. Additional files... cron.inc failed. Loading package instructions... Include cron.inc is missing! Removing package... Removing Cron components... Tabs items... done. Menu items... done. Services... done. Loading package instructions... Include file cron.inc could not be found for inclusion. Deinstall commands... Not executing custom deinstall hook because an include is missing. Removing package instructions...done. Auxiliary files... done. Package XML... done. Configuration... done. done. Failed to install package. Installation halted.systemlog says this
Dec 7 10:29:37 php-fpm[23690]: /pkg_mgr_install.php: XML_RPC_Client: Connection to RPC server packages.pfsense.org:443 failed. Operation timed out 103 Dec 7 10:29:37 php-fpm[23690]: /pkg_mgr_install.php: XMLRPC communication error: Operation timed out -
other minor aesthetic bug i noticed in serial console was, after finishing boot, it usually lists all the interfaces with their ips and then the serial console option list but misses a empty line between the interface list and console options
*** Welcome to pfSense 2.2-BETA-nanobsd (i386) on firewall *** WAN (wan) -> pppoe0 -> v4/PPPoE: x.x.x.x/32 LAN (lan) -> vr0 -> v4: 192.168.0.1/24 VPN (opt2) -> ovpnc1 -> v4: 10.13.0.6/32 0) Logout (SSH only) 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart webConfigurator 3) Reset webConfigurator password 12) pfSense Developer Shell 4) Reset to factory defaults 13) Upgrade from console 5) Reboot system 14) Enable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: -
Right now the first 2.2-RC is being made, so I would wait just a little while (1 day, or maybe hours?). There should be a post at the top of this forum to announce where you can update from - i.e. what to put in System->Firmware, Updater Settings, Firmware Auto Update URL…
Just wondering what I will see using the Firmware Auto Update URL? Will it simply download and install the upgrade and just reboot into the GUI where I would just login and go? Are any settings/packages lost? Do I need to uninstall any packages before the upgrade? Sorry for all the questions and thanks for your help.
-
other minor aesthetic bug i noticed in serial console was, after finishing boot, it usually lists all the interfaces with their ips and then the serial console option list but misses a empty line between the interface list and console options
That blank line was removed in this commit:
https://github.com/pfsense/pfsense/commit/a3cc8dcc600d105d73eb4729c32433d40d72cab7
I have no idea if it was really intentional - 2 (echo "") were needed to make a blank line, the first one just puts a new line at the end of the rc.banner output and list of interfaces, the 2nd one made the blank line. -
Just wondering what I will see using the Firmware Auto Update URL? Will it simply download and install the upgrade and just reboot into the GUI where I would just login and go? Are any settings/packages lost? Do I need to uninstall any packages before the upgrade? Sorry for all the questions and thanks for your help.
It runs like any normal upgrade - download and install of base firmware image, reboot, download and (re)install all packages.
You should be able to just do it - make a backup first, other than that no special preparation needed. -
Just wondering what I will see using the Firmware Auto Update URL? Will it simply download and install the upgrade and just reboot into the GUI where I would just login and go? Are any settings/packages lost? Do I need to uninstall any packages before the upgrade? Sorry for all the questions and thanks for your help.
It runs like any normal upgrade - download and install of base firmware image, reboot, download and (re)install all packages.
You should be able to just do it - make a backup first, other than that no special preparation needed.One last question. How large is/are the download files? I have 15Mbps down and would like to have an idea how long the whole process might take (Have to keep the wife happy lol and she wll be out for awhile).
Thanks!
-
http://snapshots.pfsense.org/FreeBSD_releng/10.1/amd64/pfSense_HEAD/updates/?C=M;O=D
76MB for the nanoBSD upgrade
86MB for the full install upgradeInternet still works during the download. (Of course, slowed by the fact that pfSense is downloading in parallel with users) It is only the reboot and package install time that really takes you off-line.
-
http://snapshots.pfsense.org/FreeBSD_releng/10.1/amd64/pfSense_HEAD/updates/?C=M;O=D
76MB for the nanoBSD upgrade
86MB for the full install upgradeInternet still works during the download. (Of course, slowed by the fact that pfSense is downloading in parallel with users) It is only the reboot and package install time that really takes you off-line.
Does the install automatically detect the install type? I have a full install amd64.
Update: The installation was flawless and I am very happy. The new firmware seems snappier. My first impression :) :) :)!
Update2 - To show my respect, support and appreciation for this project, I just became a Gold Member.
Cheers!
-
other minor aesthetic bug i noticed in serial console was, after finishing boot, it usually lists all the interfaces with their ips and then the serial console option list but misses a empty line between the interface list and console options
That blank line was removed in this commit:
https://github.com/pfsense/pfsense/commit/a3cc8dcc600d105d73eb4729c32433d40d72cab7
I have no idea if it was really intentional - 2 (echo "") were needed to make a blank line, the first one just puts a new line at the end of the rc.banner output and list of interfaces, the 2nd one made the blank line.well the blank lines just made it look more pretty and well formated, i vote for it to return :)
-
other issues im facing as of now is the SSH daemon wont start at all, on reboot i get announcement that ssh keys will be created but then when i goto services the daemon wont start at all
-
some more bugs under system->advanced->System Tunables
the list shows the entries with just default without the actual default value and that's causing sysctl errors in the boot process saying non zero values and im guessing if u remove some values it doesnt restore the default list which is present on a fresh install -
some more bugs under system->advanced->System Tunables
the list shows the entries with just default without the actual default value and that's causing sysctl errors in the boot process saying non zero values and im guessing if u remove some values it doesnt restore the default list which is present on a fresh installi figured out what the issue with this, in older pfsense the default entries r stored in config with value as default which when upgraded make the system think to take value as default and thats y the non zero error, what i did is delete those entries and rebooted and the newer pfsense recreated the same with their actual default values rather than just showing and storing default in the config
-
Upgraded to 2.2-BETA on the weekend and have received this crash message:
Crash report details:
PHP Errors:
in /usr/local/pkg/pfblocker.inc on line 253I submitted the report but not sure if there is something I can do to fix the problem.
-
Upgraded to 2.2-BETA on the weekend and have received this crash message:
Crash report details:
PHP Errors:
in /usr/local/pkg/pfblocker.inc on line 253I submitted the report but not sure if there is something I can do to fix the problem.
Hi wbennett77,
Do you get this error often? Is it a particular list that is failing?
You can suppress the error by adding an "@" in line 253 as follows :
$url_list= @gzfile($row['url']);
-
Upgraded to 2.2-BETA on the weekend and have received this crash message:
Crash report details:
PHP Errors:
in /usr/local/pkg/pfblocker.inc on line 253I submitted the report but not sure if there is something I can do to fix the problem.
Hi wbennett77,
Do you get this error often? Is it a particular list that is failing?
You can suppress the error by adding an "@" in line 253 as follows :
$url_list= @gzfile($row['url']);
I get the error constantly. Anytime I log in to the dashboard the error appears. Anytime I go to one of the other menu areas and then come back to the dashboard the error appears. I have tried reinstalling Pfblocker with no change. Pfblocker has also disabled itself a couple of times and on other occasions a certain list becomes disabled. This would seem to be an error that is causing problems with the package.
I am curious. I am using a couple of lists from I-Blocklist in the CIDR file format and gz archive format. Would this have any effect? This was all working in 2.15.
Thanks!
-
This should really be a separate topic!
Look in your config for $config['installedpackages']['pfblockerlists']['config'] (Diagnostics->Edit File, /cf/conf/config.xml - look for pfblockerlists and config under that and row and url under that. config.xml is in XML format.) Those should point to some files. In the file/s there will be loads of URLs…
I guess one of those files has a huge number of entries and it is exploding PHP memory.
