• Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Search
  • Register
  • Login
Netgate Discussion Forum
  • Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Search
  • Register
  • Login

Pdsbm-ln2 1U server Lan Ports fail in RC canidate. Using Intel 82573 nic

Scheduled Pinned Locked Moved 2.2 Snapshot Feedback and Problems - RETIRED
67 Posts 6 Posters 27.9k Views
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • T Offline
    Topper727
    last edited by Dec 7, 2014, 3:48 AM

    ok here is the log file you requested.. I am using a usb to lan 100 adapter right now to get me access to use 2.2 beta 64

    Copyright © 1992-2014 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
    FreeBSD is a registered trademark of The FreeBSD Foundation.
    FreeBSD 10.1-RELEASE #0 29f4af5(releng/10.1)-dirty: Thu Dec  4 08:55:34 CST 2014
        root@pfsense-22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10 amd64
    FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
    CPU: Intel(R) Pentium(R) Dual  CPU  E2200  @ 2.20GHz (2194.55-MHz K8-class CPU)
      Origin = "GenuineIntel"  Id = 0x6fd  Family = 0x6  Model = 0xf  Stepping = 13
      Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0xe39d <sse3,dtes64,mon,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm>AMD Features=0x20100800 <syscall,nx,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant, performance statistics
    real memory  = 4294967296 (4096 MB)
    avail memory = 4088520704 (3899 MB)
    Event timer "LAPIC" quality 400
    ACPI APIC Table: <intelb r_waterp="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
    FreeBSD/SMP: 1 package(s) x 2 core(s)
    cpu0 (BSP): APIC ID:  0
    cpu1 (AP): APIC ID:  1
    ioapic0 <version 2.0="">irqs 0-23 on motherboard
    wlan: mac acl policy registered
    ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
    ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80606640, 0) error 1
    ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
    ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806066f0, 0) error 1
    ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
    ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff806067a0, 0) error 1
    iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
    iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8062de10, 0) error 1
    iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
    iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8062dec0, 0) error 1
    iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
    iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8062df70, 0) error 1
    random: <software, yarrow="">initialized
    kbd1 at kbdmux0
    cryptosoft0: <software crypto="">on motherboard
    padlock0: No ACE support.
    acpi0: <ptltd  rsdt="">on motherboard
    acpi0: Power Button (fixed)
    cpu0: <acpi cpu="">on acpi0
    cpu1: <acpi cpu="">on acpi0
    atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
    Event timer "RTC" frequency 32768 Hz quality 0
    attimer0: <at timer="">port 0x40-0x43,0x50-0x53 irq 0 on acpi0
    Timecounter "i8254" frequency 1193182 Hz quality 0
    Event timer "i8254" frequency 1193182 Hz quality 100
    Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
    pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
    pci0: <acpi pci="" bus="">on pcib0
    vgapci0: <vga-compatible display="">port 0x30c0-0x30c7 mem 0xd0000000-0xd00fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
    agp0: <intel 946gz="" svga="" controller="">on vgapci0
    agp0: aperture size is 256M, detected 7676k stolen memory
    vgapci0: Boot video device
    pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
    pcib1: failed to allocate initial I/O port window: 0-0xfff
    pcib1: failed to allocate initial memory window: 0-0xfffff
    pcib1: failed to allocate initial prefetch window: 0-0xfffff
    pci2: <acpi pci="" bus="">on pcib1
    pcib2: <acpi pci-pci="" bridge="">irq 16 at device 28.4 on pci0
    pcib2: failed to allocate initial memory window: 0xd0100000-0xd01fffff
    pci6: <acpi pci="" bus="">on pcib2
    em0: <intel(r) 1000="" pro="" network="" connection="" 7.4.2="">port 0x4000-0x401f irq 16 at device 0.0 on pci6
    em0: Using an MSI interrupt
    em0: Setup of Shared code failed
    device_attach: em0 attach returned 6
    pcib3: <acpi pci-pci="" bridge="">irq 17 at device 28.5 on pci0
    pcib3: failed to allocate initial memory window: 0xd0200000-0xd02fffff
    pci7: <acpi pci="" bus="">on pcib3
    em0: <intel(r) 1000="" pro="" network="" connection="" 7.4.2="">port 0x5000-0x501f irq 17 at device 0.0 on pci7
    em0: Using an MSI interrupt
    uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">port 0x3000-0x301f irq 16 at device 29.0 on pci0
    usbus0 on uhci0
    uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">port 0x3020-0x303f irq 17 at device 29.1 on pci0
    usbus1 on uhci1
    uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">port 0x3040-0x305f irq 18 at device 29.2 on pci0
    usbus2 on uhci2
    uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">port 0x3060-0x307f irq 19 at device 29.3 on pci0
    usbus3 on uhci3
    ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xd0500000-0xd05003ff irq 16 at device 29.7 on pci0
    usbus4: EHCI version 1.0
    usbus4 on ehci0
    pcib4: <acpi pci-pci="" bridge="">at device 30.0 on pci0
    pci8: <acpi pci="" bus="">on pcib4
    isab0: <pci-isa bridge="">at device 31.0 on pci0
    isa0: <isa bus="">on isab0
    atapci0: <intel ich7="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af at device 31.1 on pci0
    ata0: <ata channel="">at channel 0 on atapci0
    atapci1: <intel ich7="" sata300="" controller="">port 0x30f0-0x30f7,0x30e4-0x30e7,0x30e8-0x30ef,0x30e0-0x30e3,0x30b0-0x30bf mem 0xd0500400-0xd05007ff irq 17 at device 31.2 on pci0
    ata2: <ata channel="">at channel 0 on atapci1
    ata3: <ata channel="">at channel 1 on atapci1
    acpi_button0: <power button="">on acpi0
    fdc0: <floppy drive="" controller="">port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
    orm0: <isa option="" roms="">at iomem 0xc0000-0xcafff,0xcb000-0xcbfff on isa0
    sc0: <system console="">at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
    atkbd0: <at keyboard="">irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    ppc0: cannot reserve I/O port range
    est0: <enhanced speedstep="" frequency="" control="">on cpu0
    p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
    est1: <enhanced speedstep="" frequency="" control="">on cpu1
    p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
    Timecounters tick every 1.000 msec
    IPsec: Initialized Security Association Processing.
    random: unblocking device.
    usbus0: 12Mbps Full Speed USB v1.0
    usbus1: 12Mbps Full Speed USB v1.0
    usbus2: 12Mbps Full Speed USB v1.0
    usbus3: 12Mbps Full Speed USB v1.0
    usbus4: 480Mbps High Speed USB v2.0
    ugen0.1: <intel>at usbus0
    uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
    ugen2.1: <intel>at usbus2
    uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
    ugen1.1: <intel>at usbus1
    uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
    ugen4.1: <intel>at usbus4
    uhub3: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
    ugen3.1: <intel>at usbus3
    uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
    uhub0: 2 ports with 2 removable, self powered
    uhub1: 2 ports with 2 removable, self powered
    uhub2: 2 ports with 2 removable, self powered
    uhub4: 2 ports with 2 removable, self powered
    ada0 at ata2 bus 0 scbus1 target 0 lun 0
    ada0: <st3250310as 3.aaf="">ATA-7 SATA 1.x device
    cd0 at ata2 bus 0 scbus1 target 1 lun 0
    cd0: <tsstcorp cddvdw="" ts-h653n="" 0208="">Removable CD-ROM SCSI-0 device
    cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
    cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
    ada0: Serial Number 6RYAJH0Y
    ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
    ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
    ada0: Previously was known as ad4
    SMP: AP CPU #1 Launched!
    Timecounter "TSC-low" frequency 1097273320 Hz quality 1000
    Root mount waiting for: usbus4
    Root mount waiting for: usbus4
    Root mount waiting for: usbus4
    uhub3: 8 ports with 8 removable, self powered
    Root mount waiting for: usbus4
    ugen4.2: <vendor 0x0409="">at usbus4
    uhub5: <vendor 2="" 9="" 0x0409="" product="" 0x005a,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
    Root mount waiting for: usbus4
    uhub5: 4 ports with 4 removable, self powered
    ugen4.3: <vendor 0x0b95="">at usbus4
    axe0: <vendor 3="" 0x0b95="" product="" 0x7720,="" rev="" 2.00="" 0.01,="" addr="">on usbus4
    Root mount waiting for: usbus4
    ugen4.4: <microsoft>at usbus4
    ukbd0: <microsoft 0="" 4="" natural="" ergonomic="" keyboard="" 4000,="" class="" 0,="" rev="" 2.00="" 1.73,="" addr="">on usbus4
    miibus0: <mii bus="">on axe0
    ukphy0: <generic ieee="" 802.3u="" media="" interface="">PHY 16 on miibus0
    ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    kbd2 at ukbd0
    ue0: <usb ethernet="">on axe0
    uhid0: <microsoft 0="" 4="" natural="" ergonomic="" keyboard="" 4000,="" class="" 0,="" rev="" 2.00="" 1.73,="" addr="">on usbus4
    Root mount waiting for: usbus4
    Trying to mount root from ufs:/dev/ada0s1a [rw]…
    ugen3.2: <crystalfontz america="">at usbus3
    umodem0: <crystalfontz 2="" america="" cfa-735="" display,="" class="" 0,="" rev="" 2.00="" 2.00,="" addr="">on usbus3
    umodem0: data interface 1, has no CM over data, has no break</crystalfontz></crystalfontz></microsoft></usb></generic></mii></microsoft></microsoft></vendor></vendor></vendor></vendor></tsstcorp></st3250310as></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></floppy></power></ata></ata></intel></ata></intel></isa></pci-isa></acpi></acpi></intel></intel></intel></intel></intel></intel(r)></acpi></acpi></intel(r)></acpi></acpi></acpi></acpi></intel></vga-compatible></acpi></acpi></at></at></acpi></acpi></ptltd ></software></software,></version></intelb></lahf></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

    Dell 2950 g3 server
    Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
    Current: 2000 MHz, Max: 2667 MHz
    8 CPUs: 2 package(s) x 4 core(s)
    8152 MiB and 600meg 10k drive
    Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

    1 Reply Last reply Reply Quote 0
    • T Offline
      Topper727
      last edited by Dec 7, 2014, 4:10 AM

      Posted by: stephenw10
      « on: Today at 07:46:29 am » Insert Quote
      Try disabling msi/msi-x:
      https://doc.pfsense.org/index.php/Tuning_and_Troubleshooting_Network_Cards#MSI.2FMSIX

      Tried this and nothing changed at all.. still only 1 built on lan port works.  This is not too much of problem right at moment cause I am using not fast internet so my USB - LAN 100 works ok for the slow speed.  But I plan to get much faster and I need the 1gig built on to work

      Dell 2950 g3 server
      Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
      Current: 2000 MHz, Max: 2667 MHz
      8 CPUs: 2 package(s) x 4 core(s)
      8152 MiB and 600meg 10k drive
      Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

      1 Reply Last reply Reply Quote 0
      • S Offline
        stephenw10 Netgate Administrator
        last edited by Dec 7, 2014, 3:05 PM

        Did you have that enabled during the above boot? I still see:

        em0: Using an MSI interrupt
        

        Steve

        1 Reply Last reply Reply Quote 0
        • T Offline
          Topper727
          last edited by Dec 7, 2014, 6:49 PM

          yes, I had that still the default on and after sending that log then I changed it in crossed fingers it might work.  but did not

          Dell 2950 g3 server
          Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
          Current: 2000 MHz, Max: 2667 MHz
          8 CPUs: 2 package(s) x 4 core(s)
          8152 MiB and 600meg 10k drive
          Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

          1 Reply Last reply Reply Quote 0
          • S Offline
            stephenw10 Netgate Administrator
            last edited by Dec 7, 2014, 8:40 PM

            @charliem:

            Not sure if that patch ever made it into 9.3 or 10.1

            Looks like it's in 10.1:
            https://svnweb.freebsd.org/base/release/10.1.0/sys/dev/acpica/acpi_pcib_acpi.c?revision=274417&view=markup#l210

            Steve

            1 Reply Last reply Reply Quote 0
            • T Offline
              Topper727
              last edited by Dec 8, 2014, 3:38 AM

              So wonder how to get this dual nic to show 2 nics not just 1 in pfsense 2.2?

              Dell 2950 g3 server
              Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
              Current: 2000 MHz, Max: 2667 MHz
              8 CPUs: 2 package(s) x 4 core(s)
              8152 MiB and 600meg 10k drive
              Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

              1 Reply Last reply Reply Quote 0
              • S Offline
                stephenw10 Netgate Administrator
                last edited by Dec 8, 2014, 1:09 PM

                Hard to believe you're the first person to run into this. More Googling required.
                Since this appears to be a resource allocation problem it could be a bios bug. You could try disabling acpi or/and disabling any devices you're not using, sound card, parallel port etc.

                Steve

                1 Reply Last reply Reply Quote 0
                • T Offline
                  Topper727
                  last edited by Dec 8, 2014, 7:18 PM

                  Still not giving up, if one works and the driver is in Freebsd then there is some way to get the second port of the Intel 82546 dual nic built on the motherboard.  Below is the command pciconf.  I believe I see the device listed there that is missing

                  [2.2-BETA][admin@pfSense.localdomain]/root: pciconf -lv
                  hostb0@pci0:0:0:0:      class=0x060000 card=0xb58015d9 chip=0x29708086 rev=0x02 hdr=0x00
                      class      = bridge
                      subclass  = HOST-PCI
                  vgapci0@pci0:0:2:0:    class=0x030000 card=0xb58015d9 chip=0x29728086 rev=0x02 hdr=0x00
                      class      = display
                      subclass  = VGA
                  pcib1@pci0:0:28:0:      class=0x060400 card=0xb58015d9 chip=0x27d08086 rev=0x01 hdr=0x01
                      class      = bridge
                      subclass  = PCI-PCI
                  pcib2@pci0:0:28:4:      class=0x060400 card=0xb58015d9 chip=0x27e08086 rev=0x01 hdr=0x01
                      class      = bridge
                      subclass  = PCI-PCI
                  pcib3@pci0:0:28:5:      class=0x060400 card=0xb58015d9 chip=0x27e28086 rev=0x01 hdr=0x01
                      class      = bridge
                      subclass  = PCI-PCI
                  uhci0@pci0:0:29:0:      class=0x0c0300 card=0xb58015d9 chip=0x27c88086 rev=0x01 hdr=0x00
                      class      = serial bus
                      subclass  = USB
                  uhci1@pci0:0:29:1:      class=0x0c0300 card=0xb58015d9 chip=0x27c98086 rev=0x01 hdr=0x00
                      class      = serial bus
                      subclass  = USB
                  uhci2@pci0:0:29:2:      class=0x0c0300 card=0xb58015d9 chip=0x27ca8086 rev=0x01 hdr=0x00
                      class      = serial bus
                      subclass  = USB
                  uhci3@pci0:0:29:3:      class=0x0c0300 card=0xb58015d9 chip=0x27cb8086 rev=0x01 hdr=0x00
                      class      = serial bus
                      subclass  = USB
                  ehci0@pci0:0:29:7:      class=0x0c0320 card=0xb58015d9 chip=0x27cc8086 rev=0x01 hdr=0x00
                      class      = serial bus
                      subclass  = USB
                  pcib4@pci0:0:30:0:      class=0x060401 card=0xb58015d9 chip=0x244e8086 rev=0xe1 hdr=0x01
                      class      = bridge
                      subclass  = PCI-PCI
                  isab0@pci0:0:31:0:      class=0x060100 card=0xb58015d9 chip=0x27b88086 rev=0x01 hdr=0x00
                      class      = bridge
                      subclass  = PCI-ISA
                  atapci0@pci0:0:31:1:    class=0x01018a card=0xb58015d9 chip=0x27df8086 rev=0x01 hdr=0x00
                      class      = mass storage
                      subclass  = ATA
                  atapci1@pci0:0:31:2:    class=0x01018f card=0xb58015d9 chip=0x27c08086 rev=0x01 hdr=0x00
                      class      = mass storage
                      subclass  = ATA
                  none0@pci0:0:31:3:      class=0x0c0500 card=0xb58015d9 chip=0x27da8086 rev=0x01 hdr=0x00
                      class      = serial bus
                      subclass  = SMBus
                  none1@pci0:6:0:0:      class=0x020000 card=0x109a15d9 chip=0x109a8086 rev=0x00 hdr=0x00
                      class      = network
                      subclass  = ethernet
                  em0@pci0:7:0:0: class=0x020000 card=0x109a15d9 chip=0x109a8086 rev=0x00 hdr=0x00
                      class      = network
                      subclass  = ethernet

                  Dell 2950 g3 server
                  Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                  Current: 2000 MHz, Max: 2667 MHz
                  8 CPUs: 2 package(s) x 4 core(s)
                  8152 MiB and 600meg 10k drive
                  Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                  1 Reply Last reply Reply Quote 0
                  • T Offline
                    Topper727
                    last edited by Dec 8, 2014, 9:30 PM

                    I have updated the bios from 2007 version to a 2009 latest one they had.  I even played with jumpers to disable the working one and then the other worked.. So both will work but only 1 at a time.

                    Dell 2950 g3 server
                    Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                    Current: 2000 MHz, Max: 2667 MHz
                    8 CPUs: 2 package(s) x 4 core(s)
                    8152 MiB and 600meg 10k drive
                    Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                    1 Reply Last reply Reply Quote 0
                    • S Offline
                      stephenw10 Netgate Administrator
                      last edited by Dec 8, 2014, 9:35 PM

                      Yep that's it but it doesn't help much. Actually reading back through the boot log most of the errors are not directly about the NICs but the buses/bridges the are attached to.
                      The thing with the most errors is pcib1 ,PCI bridge 1. That appears to be connecting PCI bus 0 to PCI bus 2. These are not necessarily PCI buses as you might think of them, they could be PCIe or AGP or some thing else.
                      PCI bridge 2 connects PCI bus 0 to PCI bus 6. The first NIC that fails to attach to a driver is on PCI bus 6.
                      PCI bridge 3 connects PCI bus 0 to PCI bus 7. The NIC that works is on bus 7.
                      Both these PCI bridges are showing the same allocation errors yet one is functioning just fine.

                      Those errors, though not good, may be not relevent. Do you see anything like that under 2.1.5?

                      You could try booting in verbose mode to see if any further errors are given.
                      I was sure there was on option to do this in 2.2  but I can't find it now  ??? so just add boot_verbose="1" to loader.conf.local.

                      Steve

                      1 Reply Last reply Reply Quote 0
                      • S Offline
                        stephenw10 Netgate Administrator
                        last edited by Dec 8, 2014, 9:43 PM

                        This looks to have appeared in 9.1:
                        https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=176073

                        Steve

                        1 Reply Last reply Reply Quote 0
                        • S Offline
                          stephenw10 Netgate Administrator
                          last edited by Dec 8, 2014, 9:50 PM

                          Long shot but try this:

                          If additionally DMA-Support for VT-d is disabled, it also works with FreeBSD (9.1).

                          I assume in the BIOS.

                          Steve

                          1 Reply Last reply Reply Quote 0
                          • T Offline
                            Topper727
                            last edited by Dec 8, 2014, 11:03 PM

                            In looking around maybe this has something to do with it.

                            https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=17509

                            They say the last driver dated 4 months ago only supports the 9.x kernals of Freebsd.  Maybe this is why it breaks in 10.1?

                            Dell 2950 g3 server
                            Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                            Current: 2000 MHz, Max: 2667 MHz
                            8 CPUs: 2 package(s) x 4 core(s)
                            8152 MiB and 600meg 10k drive
                            Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                            1 Reply Last reply Reply Quote 0
                            • T Offline
                              Topper727
                              last edited by Dec 9, 2014, 4:46 AM

                              I did not find any DMA stuff in bios.. As far as ACPI I turned that off and pfsense would not boot then.. I turned off shadowing and all kinds of stuff nothing makes a difference.

                              ![2014-12-08 21.58.37.jpg](/public/imported_attachments/1/2014-12-08 21.58.37.jpg)
                              ![2014-12-08 21.58.37.jpg_thumb](/public/imported_attachments/1/2014-12-08 21.58.37.jpg_thumb)

                              Dell 2950 g3 server
                              Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                              Current: 2000 MHz, Max: 2667 MHz
                              8 CPUs: 2 package(s) x 4 core(s)
                              8152 MiB and 600meg 10k drive
                              Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                              1 Reply Last reply Reply Quote 0
                              • T Offline
                                Topper727
                                last edited by Dec 11, 2014, 8:24 AM

                                Updated to the 2.2 Dec 10th RC version.  Still same, I tried to put in a wifi PCI card in the system and it did same as the dual nic card bv intel I tried also

                                Seems what ever is messing up em1 from working anything else in the system will not run except USB -Network

                                The wifi Card I tried  was the wmp54gs pci… It failed and locked like the intel dual nic PCI card did showing this message (see picture)

                                ![2014-12-11 03.10.53.jpg](/public/imported_attachments/1/2014-12-11 03.10.53.jpg)
                                ![2014-12-11 03.10.53.jpg_thumb](/public/imported_attachments/1/2014-12-11 03.10.53.jpg_thumb)

                                Dell 2950 g3 server
                                Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                                Current: 2000 MHz, Max: 2667 MHz
                                8 CPUs: 2 package(s) x 4 core(s)
                                8152 MiB and 600meg 10k drive
                                Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                                1 Reply Last reply Reply Quote 0
                                • S Offline
                                  stephenw10 Netgate Administrator
                                  last edited by Dec 11, 2014, 1:35 PM

                                  That card should be supported by the bwn or bwi drivers, depending which version you have, but you need the firmware for it and I've seen it give others trouble before. Still shouldn't be hanging there though.  :-
                                  Do you have the ports on the Intel NIC connected and up when booting? I've read some posts saying that makes a difference.

                                  Steve

                                  1 Reply Last reply Reply Quote 0
                                  • T Offline
                                    Topper727
                                    last edited by Dec 12, 2014, 3:38 AM Dec 12, 2014, 2:49 AM

                                    Ok did some testing.  The 2 built on the pdsbm motherboard the Intel 82573 will only work with 1 of the 2.. either one but only 1..  And when you do this then nothing WIFI wmp54gs  or dual nic pci card I put in will boot, all lock up.  When I disabled the 2 built on intel 82573 and then booted with  the wifi card it worked..

                                    I then tried the dual 82546 Intel PCI card with the onboard ports off and it worked fine also.

                                    So I guess the newer Intel dual nic chip 82573 has some bug in the driver that the Intel 82546 does not.  I can't put the pci 82546 and wifi in as I don't have enough PCI slots

                                    And pulling all cables from the net ports did not change a thing. Still same results.  If either 1 or both are enabled on the motherboard the PCI cards will only lock up .. wifi and dual pci nic.  .

                                    ![2014-12-11 21.36.46.jpg](/public/imported_attachments/1/2014-12-11 21.36.46.jpg)
                                    ![2014-12-11 21.36.46.jpg_thumb](/public/imported_attachments/1/2014-12-11 21.36.46.jpg_thumb)
                                    ![2014-12-11 21.31.26.jpg](/public/imported_attachments/1/2014-12-11 21.31.26.jpg)
                                    ![2014-12-11 21.31.26.jpg_thumb](/public/imported_attachments/1/2014-12-11 21.31.26.jpg_thumb)

                                    Dell 2950 g3 server
                                    Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                                    Current: 2000 MHz, Max: 2667 MHz
                                    8 CPUs: 2 package(s) x 4 core(s)
                                    8152 MiB and 600meg 10k drive
                                    Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                                    1 Reply Last reply Reply Quote 0
                                    • T Offline
                                      Topper727
                                      last edited by Dec 13, 2014, 1:44 AM

                                      I can setup ssh for someone to look around if needed.. I hope to get this working please..

                                      Dell 2950 g3 server
                                      Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                                      Current: 2000 MHz, Max: 2667 MHz
                                      8 CPUs: 2 package(s) x 4 core(s)
                                      8152 MiB and 600meg 10k drive
                                      Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                                      1 Reply Last reply Reply Quote 0
                                      • H Offline
                                        heper
                                        last edited by Dec 13, 2014, 2:40 AM

                                        have you tried resetting your bios to defaults ? using the jumper on the motherboard to be sure ?
                                        be sure to have the cards in place before you do so.

                                        years ago ( i think pfsense 1.2.3) i've wasted half a day trying to get it to work; after being desperate and giving up i decided to reset the bios and suddenly it all worked
                                        it's a long shot, but can't hurt to try

                                        it looks like an IRQ problem from the old DOS days to me … shouldn't be possible with modern x64 ACPI shitz but have you tried ALL different combination of pci(e) slots ? moving the nics to another slot might just do the trick

                                        1 Reply Last reply Reply Quote 0
                                        • T Offline
                                          Topper727
                                          last edited by Dec 13, 2014, 6:03 AM

                                          I have updated and reset the bios from 2007 version to a 2010 version.  There is no PCI cards in the system when I test the two on board network ports.  When those are enabled with jumpers nothing in PCI slots work.  Not wifi card or the dual nic I have.  But disable the 2 on board and then I can use PCI slots.  Funny thing is that the two on board are newer chips but still using same driver as the dual nic I have and the dual nic will work fine if both on board are turned off.

                                          Dell 2950 g3 server
                                          Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                                          Current: 2000 MHz, Max: 2667 MHz
                                          8 CPUs: 2 package(s) x 4 core(s)
                                          8152 MiB and 600meg 10k drive
                                          Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                                          1 Reply Last reply Reply Quote 0
                                          29 out of 67
                                          • First post
                                            29/67
                                            Last post
                                          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.
                                            This community forum collects and processes your personal information.
                                            consent.not_received