Intel C1037U pfSense 2.2 Installation no WiFi detection
-
So here's what lspci gave me back
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
03:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)Do You need anything more?
best regards
-
You'll need to use 'lspci -nn' to show the pci ids.
However I don't think there's a driver for the bcm43224 so you're probably out of luck.Steve
-
So the ID's are the following: 14e4:4353
Found some discussions on the internet about an FreeBSD driver.
Maybe possible to compile? -
Do you have a link to those discussions? I can only find references to there being no driver.
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=192057#c1Steve
-
I ended up with two threads, more one description and one driver compilation.
Don't know if it's ok to post them here?best regards
-
Unless the discussions were on some highly suspect site I don't see why it should be a problem. PM them to if you want.
Steve
-
Maybe they could help in some way:
http://wireless.kernel.org/en/users/Drivers/brcm80211
http://linuxg.net/how-to-install-bcm43224-wireless-linux-driver-on-centos-6-x/best regards
-
Unfortunately neither of those are helpful. They both refer to the Linux driver and pfSense is built on FreeBSD, which isn't Linux.
Steve
-
Save yourself the time and trouble and just get an Atheros card that works. Lucky for you, I have an Intel C1037U and a working WiFi card. Qualcomm Atheros Wireless AR5BHB92 AR9280 PCI-E Half Mini Card will do the trick.
http://www.amazon.com/gp/product/B00JESLUWQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
-
Save yourself the time and trouble and just get an Atheros card that works. Lucky for you, I have an Intel C1037U and a working WiFi card. Qualcomm Atheros Wireless AR5BHB92 AR9280 PCI-E Half Mini Card will do the trick.
http://www.amazon.com/gp/product/B00JESLUWQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I have this card (as well as an AR9462 card) and I couldn't get it to work as a client in 'Infrastructure' mode. I haven't tested AP mode. Did you use it in both modes? If so, what settings did you use?
-
Save yourself the time and trouble and just get an Atheros card that works. Lucky for you, I have an Intel C1037U and a working WiFi card. Qualcomm Atheros Wireless AR5BHB92 AR9280 PCI-E Half Mini Card will do the trick.
http://www.amazon.com/gp/product/B00JESLUWQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I have this card (as well as an AR9462 card) and I couldn't get it to work as a client in 'Infrastructure' mode. I haven't tested AP mode. Did you use it in both modes? If so, what settings did you use?
Good point, I have not tried Infrastructure mode. The last time I tried setting that up I could not get it to work so I haven't even considered it since. It does work in AP mode just fine. I got it working on both 2.4GHz and 5.0GHz but it won't do both, simultaneously. Since I have some 2.4GHz only devices I stuck with 'N'. I'll check my settings when I get home but it is WPA2 and I picked an empty channel, I think 8. With my dual 6db antennas it gets quite good coverage.
-
The not supported WiFi PCIe card is the only thing keeping me away from installing pfSense this hardware.
By now I am running it in VMWare ESXi with two other virtual servers going very well.I cant get this card to my country, and I can't buy on amazon.com :D
