Virtual Machine Properties Updating
-
I guess the "if running from Live CD, install it" part must be extremely hard to get…
-
I'm not sure what you mean …
At the following screen what should I select if I want to retrieve all of my original configurations?
-
Well - We are all hoping that at some point in the past you have pressed "I" and followed the prompts…
-
-
OK, so I've pressed "I" and presented with the following screen
I have selected "Accept these settings"
-
So install it on a disk, eject the "CD" and configure the thing or restore from a back up config.
-
I'm assuming at the the following screen I should choose "Rescue config.xml"?
-
OMG. Install the damned thing on the virtual drive! There is nothing to rescue when there's nothing installed… You have no config.xml, you need to redo everything from scratch obviously.
-
I got the following screen
-
No. Install the software. Then if you have a config.xml to recover from you can do it.
-
Oh yeah, "there is nothing to rescue when there's nothing installed" is another hard one.
-
OMG. Install the damned thing on the virtual drive! There is nothing to rescue when there's nothing installed… You have no config.xml, you need to redo everything from scratch obviously.
First thing, calm down.
I'm trying to understand why I lose my configuration when I power down pfSense. I was told that I shouldn't lose it. Therefore, I powered down, and it appeared as though I lost my whole configuration - but I wasn't sure.
Therefore, I was going through the process that might allow me recover my configuration.
So, why don't you relax. If my questions annoy you walk away.
If you gonna help then help, but if you're going to be rude then why bother reply?
-
Let the learning begin!
You lost your config because pfsense was never installed.
Once you install, you should be well on your way.
You will have to reconfigure it again after install but the install will be retained from then on if you do it correctly.
Then CMB will be RIGHT!!!
-
Oh yeah, "there is nothing to rescue when there's nothing installed" is another hard one.
Well I clearly don't know if there is any settings that can be rescued….
Are all members of this community as nice as you guys??
-
Dude, dunno… have you ever installed ANY OS?
-
Look, I had a fully functioning pfSense firewall with the configurations shown in the image.
I asked the question, if I power down the firewall will I lose all of those configurations. The answer that came back was no.
I powered it down and everything has gone. I'm trying to ensure that before I reconfigure I'm able to recover if the device is powered down.
-
No, you cannot recover anything from your NONEXISTENT install. You know, the one that did run from RAM only, because, like… you NEVER installed it. Sorry, never figured out that someone might think they'll get configuration saved on live CD. Now, move on and read some install docs.
-
The pfSense is installed on a VMware ESXi host.
-
Dude, you are booting from the darned LiveCD and you clearly never installed anything.
Booting from ISO is NOT install!
-
Live boot is what you did - Live boot isn't an install.
The reason CMB answered the way he did is because he was assuming you had some small level of knowledge on pfsense at least, like you have to install it if you want to keep settings between boot. Seriously, not one of us would have thought you would do a big configuration on a live boot.
But, now that we are all clear - Just install it. Then if you have more questions, ask. If you do something extremely silly, I can't guarantee no one will joke with you, but you will probably get a good answer, like you did this time (-;
