Default interfaces not found….
-
PFSense box won't start after 2.2 upgrade I got default interfaces not found even with the valid interfaces xl0 and bge0 from working 2.1 box!
Configuration could not be validated! A previous configuration was restored.
Anyone had the same upgrade problem please?
-
I can't ssh to the box no interfaces are working. Last from log line is:
Warning: Invalid argument supplied foreach() in /etc/inc/xmlparse.inc on line 214
What would you be your suggestion please?
-
I have exactly the same issue, No valid interfaces found, when I upgrade from 2.1.5 I can see the old Vlans configured but no real interfaces, re0 and em0 both appear in 2.1.
no network access at all?
Any Ideas?
-
This happens even after a complete fresh rebuild,
Intel D510MO maainboard with intel Pro/1000.
-
Maybe the drivers don't find any NIC drivers on your system. Try a BIOS factory defaults.
-
Try a BIOS factory defaults
Nope..doesn't work.
- Broadcom NetXtreme Gigabit Ethernet Controller
- 3Com 3c905-TX Fast Etherlink XL
Useless dead box here after 2.2 upgrade!!!!
-
Completely dead with 2.2, this box has worked for the last 3 or 4 years flawlessly, and with 2.1.5 still does.
Please any ideas, anything I can do to get info out of the install to help with diags?
Anyone else using a Intel D510MO mini-itx board?
regards
-
Are you using 64-bit pfSense or i386? Read this, related to Atom CPU: https://forum.pfsense.org/index.php?topic=84679.msg481942#msg481942
-
Are you using 64-bit pfSense or i386?
My system is i386 and "cpu doesn, t support long mode". I reinstalling 2.2 from CD with some packages still out of order. :'(
2.2 upgrade was painful in any case! -
I had am having the exact same issue. upgraded from 2.15 on an intel atom x86 and after the reboot no nics found.
When you reinstalled from scratch did it work?
I want to reinstall from scratch but I need to backup my settings and config and since I can't get the system to boot without the nics I don't know how.
And tips?
Thanks
-
When you reinstalled from scratch did it work?
Yes worked for me on 32-bit architecture.
I have backup not the latest one but at least several months old make my life easier. Still looking for SquidGuard & HAVP package to work! I hope that you will get the solution soon.Good luck