HAVP services not starting

els

It's happening to me as well. I did reinstall the HAVP package and the end result was the same. It wouldn't start. I noticed some errors in the log about some scripts that do not exist. Maybe the install wasn't successful?

SunStroke

Login to SSH to pfSense machine, switch to console ("8" menu) and execute:```
havp.sh start

VipIT

Below my output. just upgraded to v2.2 , everything was working before, but not anymore


[2.2-RELEASE][admin@<hostname removed="">]/usr/local/etc/havp: /usr/local/etc/rc.d/havp.sh start
Configuration is not edited!
You must delete REMOVETHISLINE option.
Review the configuration carefully. :)
Exiting..
[2.2-RELEASE][admin@<hostname removed="">]/usr/local/etc/havp: grep -r REMOVETHISLINE /usr/local/etc/
[2.2-RELEASE][admin@<hostname removed="">]/usr/local/etc/havp:</hostname></hostname></hostname>

marcelloc

Try squid3 instead, it has clamav integration woking fine.

dweeks

I have tried HVAP several times on the 2.2 release candidates going back as far as December. It has never worked for me. On 2.1 it was fine. It seems like the install script needs some attention because it appears to be looking for files in the wrong place. I am surprised that since this has been going on so long that it was not fixed before 2.2 was released. It would be most appreciated if somebody could take a look at this and make it work again. I would rather not run a proxy server just to scan for viruses.

marcelloc

The point is that you can't search for virus in https using havp but squid can.

IMHO, havp is old and deprecated.

messerchmidt

hvap will not start at all for me on 2.2

Barnabas

I am very new to Pfsense and I also just upgraded from 2.1.5 to 2.2 and HAVP service would not start.

Also my internet connection was very spotty (going up and down) and i could not find any obvious errors in the system logs.
So I uninstalled the HAVP package, and now internet access is working fine.
Looking at a few of the posts here it seems that HAVP is no longer recommended because it does not scan https connections so I haven't reinstalled.

Is there a updated list as to the packages that are depreciated that are not recommended with V2.2?

Many thanks.

messerchmidt

the package probably needs an update

firefox

same here
after upgrade from 2.1.5 to 2.2
havp dont work

@SunStroke:

Login to SSH to pfSense machine, switch to console ("8" menu) and execute:```
havp.sh start

havp.sh: Command not found.

VipIT

@marcelloc:

Try squid3 instead, it has clamav integration woking fine.

even that is not working. Squid by itself is working, but when I activate the ClamAV integration, I always get a protocol error back when trying to go to some websites

marcelloc

@VipIT:

even that is not working. Squid by itself is working, but when I activate the ClamAV integration, I always get a protocol error back when trying to go to some websites

What version are you using? I386 or amd64?
When you active antivirus, you have to wait the first virus database(freshclam) run to finish and then stop and start both squid and c-icap service. I've posted a step by step instructions for squid and antivirus for pfSense 2.2.

VipIT

@marcelloc:

@VipIT:

even that is not working. Squid by itself is working, but when I activate the ClamAV integration, I always get a protocol error back when trying to go to some websites

What version are you using? I386 or amd64?
When you active antivirus, you have to wait the first virus database(freshclam) run to finish and then stop and start both squid and c-icap service. I've posted a step by step instructions for squid and antivirus for pfSense 2.2.

amd64 on AMD G-T40E . got it working now, deinstalled everything, reinstalled again, went through all gui settings again, saved all those tabs (again) , restarted everything manually and now it's working. the Squid with ICAP at least. giving up on HAV for the moment.

marcelloc

This is the guide I did for a fresh install for further reference.
https://forum.pfsense.org/index.php?topic=87424.msg480232#msg480232

VipIT

@marcelloc:

This is the guide I did for a fresh install for further reference.
https://forum.pfsense.org/index.php?topic=87424.msg480232#msg480232

yeah followed that one, although I did not have to set the settings again, because even when uninstalling, it retains the settings., but going through every tab and saving on that tab again and restarting everything did solve the issue

firefox

Is there a way to fix it
Without reinstall

Why it stopped working ?@firefox:

same here
after upgrade from 2.1.5 to 2.2
havp dont work

@SunStroke:
Login to SSH to pfSense machine, switch to console ("8" menu) and execute:```
havp.sh start
havp.sh: Command not found.

messerchmidt

even on a clean 2.2 install, it will not start (for me)

sisko212

Confirm, also on my pfsense, after upgrade to 2.2 (amd64), havp doesn't start. I have tried to remove and reinstall but without success.

firefox

But what is the solution to this problem
And why is this happening

If this happens to many people
At least
One should know what is the solution

messerchmidt

solution seems to be an update to the package, so we have to wait