DNS Forwarder doesn't work after reboot with 2.2
-
Setting up a new 2.2 system I find that the DNS Forwarder (as used in 2.1.5) doesn't work after a power-on. The logs look okay, but it must be manually restarted before it works.
-
Is DNS Resolver also on?
-
No
-
post your settings for dns forwarder and for system general settings page.
-
We trashed this install and went back to 2.1.5. We are finding that version much more stable. I made this post for the benefit of others.
-
There is nothing broken on the 2.2 DNS.
In every instance that someone had a serious DNS issue, a bit of digging (No pun intended) has found that their configuration wasn't quite right.
-
If the config isn't right then it should not be fixed by restarting the service should it?
-
SIGLOLCAT. :P
-
No - Reboots don't fix bad configurations. Configuring correctly fixes bad configuration.
When you want to talk about your current configuration and how to fix it on 2.2, people will help.
-
No - Reboots don't fix bad configurations.
Unless it's so bad it loads a backup. And that digging pun was unforgivable. ;)
Steve
-
Benefit of others? So other people with layer 8 issues like yours? So no errors in the log, showing your config would be a simple screenshot taking 2 seconds.. But your helping others by telling them hey if dns doesn't work exactly how you think it should work go back to 2.1.5?? Yeah that is going to help thousands I think :rolleyes: