How and IF!
-
Hello
here is my issueim having 1 wan at 50mbps
i have 3 different networks
1st at 192.168.0.1
2ond at 192.168.1.1
3rd at 192.168.2.1my goal is to :
- first of all i dont want any of these 3 networks to "see" the other
2)i want to have 3 diferent dhcps one for each subnet - i want to be able to assign diferent bandwith on each subnet for example 30 mbps on 192.168.0.1 , 10mbps on 192.168.1.1 and 10mpbs 192.168.2.1
- i want to be able to assign diferent port forwardings from wan port on diferent networks for example the the 3389 port on 192.168.0.36 and 5050 port on 192.168.2.64
i will be able to do all these with pf sense?
thank you in advance
- first of all i dont want any of these 3 networks to "see" the other
-
if you have enough network cards or use vlans , then yes
-
first of all thank you for the fast reply
i have managed to setup
1 wan interface
lan1
opt1
opt2i want to give 20mbs bandwith on lan1 5 on opt1 and 5 on opt 2
how can i do that ? on traffic shaper im only able to assign priorites… :-\
-
Limiters. You might want to post in the Traffic Shaping section with a descriptive title.