How and IF!

[unlimited1981]

Hello
here is my issue

im having 1 wan at 50mbps

i have 3 different networks

1st at 192.168.0.1
2ond at 192.168.1.1
3rd at 192.168.2.1

my goal is to :

1. first of all i dont want any of these 3 networks to "see" the other
   2)i want to have 3 diferent dhcps one for each subnet
2. i want to be able to assign diferent bandwith on each subnet for example 30 mbps on 192.168.0.1 , 10mbps on 192.168.1.1 and 10mpbs 192.168.2.1
3. i want to be able to assign diferent port forwardings from wan port on diferent networks for example the the 3389 port on 192.168.0.36 and 5050 port on 192.168.2.64

i will be able to do all these with pf sense?

thank you in advance

[heper]

if you have enough network cards or use vlans , then yes

[unlimited1981]

first of all thank you for the fast reply

i have managed to setup

1 wan interface

lan1
opt1
opt2

i want to give 20mbs bandwith on lan1 5 on opt1 and 5 on opt 2

how can i do that ? on traffic shaper im only able to assign priorites…  :-\

[dotdash]

Limiters. You might want to post in the Traffic Shaping section with a descriptive title.