Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    RCC-VE installation

    Scheduled Pinned Locked Moved Hardware
    64 Posts 14 Posters 16.2k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      sscardefield
      last edited by

      @almabes:

      Also…
      For about $60 I installed a 64GB Plextor mSATA SSD.  That allowed me to keep the CentOS installation on the 4GB of eMMC.  According to ADI's documentation, there are some utilities installed there you may want to keep.  Also, it could be possibly a good debugging OS in case something in pfSense goes really sideways.

      I agree. I am currently running pfSense on the eMMC, but would like to have the CentOS as well. As soon as Netgate posts the QSG (https://firmware.netgate.com/qsg) or gives us instructions and how to restore the factory image then I will probably buy an mSATA drive and throw pfSense on there.

      1 Reply Last reply Reply Quote 0
      • M
        mwp821
        last edited by

        @almabes:

        According to ADI's documentation, there are some utilities installed there you may want to keep.

        Yeah, I saw those in the RCC-VE platform documentation. Hopefully the team has made or will make those utilities available from within FreeBSD/pfSense as well. Maybe I should have waited to buy a SG-2440…

        1 Reply Last reply Reply Quote 0
        • ?
          Guest
          last edited by

          @almabes:

          Another tweak…

          Certain intel igb cards, especially multi-port cards, can very easily exhaust mbufs and cause kernel panics, especially on amd64. The following tweak will prevent this from being an issue:
          In /boot/loader.conf.local - Add the following (or create the file if it does not exist):
          kern.ipc.nmbclusters="1000000"
          That will increase the amount of network memory buffers, allowing the driver enough headroom for its optimal operation.

          see:  https://doc.pfsense.org/index.php/Tuning_and_Troubleshooting_Network_Cards#Intel_igb.284.29_and_em.284.29_Cards

          the kernel doesn't panic when you exhaust mbufs, it panics when you set this limit too high (and your number is too high), because
          the system runs out of memory.

          For each mbuf cluster there is “mbuf” structure needed.  These each consume 256 bytes, and are used to organize mbuf clusters in chains. An mbuf cluster takes another 2048 bytes (or more, for jumbo frames).  There’s possibility to store some additional useful 100B data into the mbuf, but it is not always used.

          When there are no free mbuf clusters available, FreeBSD enters the zonelimit state and stops answering network requests. You can see it as the zoneli state in the output of the top command.  It doesn't panic, it appears to 'freeze' for network activity.

          If  your box has 1GB of RAM or more, 25K mbuf clusters will be created by default.  Occasionally this is not enough.  If it is, then perhaps doubling that value, and maybe doubling again, are in order.  But 1M mbuf clusters?  Are you serious?

          You just advised people to consume 1,000,000 mbuf clusters (at 2K each).  Let me know if I need to explain how much RAM you needlessly advised people to allocate for no good purpose.

          I am well-aware that someone wrote something completely uninformed here: https://doc.pfsense.org/index.php/Tuning_and_Troubleshooting_Network_Cards#mbuf_.2F_nmbclusters
          so please don't quote it back to me.

          1 Reply Last reply Reply Quote 0
          • ?
            Guest
            last edited by

            @mwp821:

            @almabes:

            According to ADI's documentation, there are some utilities installed there you may want to keep.

            Yeah, I saw those in the RCC-VE platform documentation. Hopefully the team has made or will make those utilities available from within FreeBSD/pfSense as well. Maybe I should have waited to buy a SG-2440…

            You're misinformed.  That CentOS factory image is ours, not ADI's.

            1 Reply Last reply Reply Quote 0
            • ?
              Guest
              last edited by

              @sscardefield:

              I am having an issue trying to get the Nano running.

              Why are you running the nano image?

              1 Reply Last reply Reply Quote 0
              • M
                mwp821
                last edited by

                @gonzopancho:

                You're misinformed.  That CentOS factory image is ours, not ADI's.

                Oh, so it doesn't contain a modified version of the flashrom utility?

                1 Reply Last reply Reply Quote 0
                • jahonixJ
                  jahonix
                  last edited by

                  @gonzopancho:

                  Why are you running the nano image?

                  On an RCC-VE I would have done just that without much thinking.
                  Nano images have the serial console instead of VGA and by default are r/o to save on wear from CF or even from an SSD.
                  Not?

                  1 Reply Last reply Reply Quote 0
                  • ?
                    Guest
                    last edited by

                    @jahonix:

                    @gonzopancho:

                    Why are you running the nano image?

                    On an RCC-VE I would have done just that without much thinking.
                    Nano images have the serial console instead of VGA and by default are r/o to save on wear from CF or even from an SSD.
                    Not?

                    No.

                    1 Reply Last reply Reply Quote 0
                    • ?
                      Guest
                      last edited by

                      @mwp821:

                      @gonzopancho:

                      You're misinformed.  That CentOS factory image is ours, not ADI's.

                      Oh, so it doesn't contain a modified version of the flashrom utility?

                      Tell me why you need the flashrom utility.

                      Here is a hint:  if/when you do, it will be provided, with the new BIOS image.

                      1 Reply Last reply Reply Quote 0
                      • N
                        No0Vad
                        last edited by

                        Then edit the /[mountlocation]/boot/loader.conf file to have an extra line underneath 'comconsole_speed="115200"' that reads 'comconsole_port="0x2f8"'

                        How do you edit the file?

                        I have used Win32 Disk Imager on a Windows machine to create the usb drive with pfSense.

                        Then I have added the usb device in Virtualbox so my VM Ubuntu can access it.
                        If I execute sudo fdisk -l I can see that /dev/sdb is my usb drive. With 2 partitions(?), /dev/sdb4 and /dev/sdb4p4.

                        From here, I've had no success, and don't know what to do next.
                        My knowledge of the Linux world is very basic.

                        1 Reply Last reply Reply Quote 0
                        • ?
                          Guest
                          last edited by

                          https://snapshots.pfsense.org/FreeBSD_releng/10.1/amd64/pfSense_RELENG_2_2/livecd_installer/pfSense-memstick-ADI-2.2.2-DEVELOPMENT-amd64-20150401-1519.img.gz

                          1 Reply Last reply Reply Quote 0
                          • C
                            csutcliff
                            last edited by

                            @gonzopancho:

                            https://snapshots.pfsense.org/FreeBSD_releng/10.1/amd64/pfSense_RELENG_2_2/livecd_installer/pfSense-memstick-ADI-2.2.2-DEVELOPMENT-amd64-20150401-1519.img.gz

                            Thanks for this, I've had quite a few requests from people for a copy of "my" image which I have not fulfilled so as to not violate your trademark  :P

                            It's nice to know that these will have even minimal support for those of us too poor/cheap to buy the pfsense branded version!

                            Keep up the good work :)

                            1 Reply Last reply Reply Quote 0
                            • M
                              mwp821
                              last edited by

                              @No0Vad:

                              How do you edit the file?

                              I had some trouble getting it to mount read-write in Ubuntu. Apparently the read-write UFS driver for Linux is still a bit unstable so the Ubuntu kernel has the read-only driver.

                              I downloaded the FreeBSD 10.1-RELEASE virtual machine image (.vmdk) and created a new VirtualBox VM with that image as the hard drive. Boot it up, attach the USB drive, get the device name from dmesg, mount the slice (when I get home tonight I can work out the exact command for you), and edit the file(s) as needed.

                              1 Reply Last reply Reply Quote 0
                              • M
                                mwp821
                                last edited by

                                @gonzopancho:

                                @mwp821:

                                @gonzopancho:

                                You're misinformed.  That CentOS factory image is ours, not ADI's.

                                Oh, so it doesn't contain a modified version of the flashrom utility?

                                Tell me why you need the flashrom utility.

                                Here is a hint:  if/when you do, it will be provided, with the new BIOS image.

                                Sweet!

                                1 Reply Last reply Reply Quote 0
                                • M
                                  mwp821
                                  last edited by

                                  @csutcliff:

                                  @gonzopancho:

                                  https://snapshots.pfsense.org/FreeBSD_releng/10.1/amd64/pfSense_RELENG_2_2/livecd_installer/pfSense-memstick-ADI-2.2.2-DEVELOPMENT-amd64-20150401-1519.img.gz

                                  Thanks for this, I've had quite a few requests from people for a copy of "my" image which I have not fulfilled so as to not violate your trademark  :P

                                  It's nice to know that these will have even minimal support for those of us too poor/cheap to buy the pfsense branded version!

                                  Keep up the good work :)

                                  I'd like to add my thanks. This is really fantastic. Just so I can gauge whether or not it would be worthwhile to rebuild the OS on my 2440, how much tweaking and customization for the RCC-VE platform is included in this image vs. the standard amd64 installer?

                                  1 Reply Last reply Reply Quote 0
                                  • ?
                                    Guest
                                    last edited by

                                    Three lines in /etc/rc.conf.local, IIRC.

                                    1 Reply Last reply Reply Quote 0
                                    • ?
                                      Guest
                                      last edited by

                                      @csutcliff:

                                      @gonzopancho:

                                      https://snapshots.pfsense.org/FreeBSD_releng/10.1/amd64/pfSense_RELENG_2_2/livecd_installer/pfSense-memstick-ADI-2.2.2-DEVELOPMENT-amd64-20150401-1519.img.gz

                                      Thanks for this, I've had quite a few requests from people for a copy of "my" image which I have not fulfilled so as to not violate your trademark  :P

                                      It's nice to know that these will have even minimal support for those of us too poor/cheap to buy the pfsense branded version!

                                      Keep up the good work :)

                                      I want to thank you for your restraint.  Please get ahold of sdavis@ and let him know that I gave you a free year of pfSense Gold.

                                      1 Reply Last reply Reply Quote 0
                                      • A
                                        almabes
                                        last edited by

                                        @gonzopancho:

                                        @mwp821:

                                        @almabes:

                                        According to ADI's documentation, there are some utilities installed there you may want to keep.

                                        Yeah, I saw those in the RCC-VE platform documentation. Hopefully the team has made or will make those utilities available from within FreeBSD/pfSense as well. Maybe I should have waited to buy a SG-2440…

                                        You're misinformed.  That CentOS factory image is ours, not ADI's.

                                        It's not the first time…

                                        1 Reply Last reply Reply Quote 0
                                        • A
                                          almabes
                                          last edited by

                                          @gonzopancho:

                                          @almabes:

                                          Another tweak…

                                          Certain intel igb cards, especially multi-port cards, can very easily exhaust mbufs and cause kernel panics, especially on amd64. The following tweak will prevent this from being an issue:
                                          In /boot/loader.conf.local - Add the following (or create the file if it does not exist):
                                          kern.ipc.nmbclusters="1000000"
                                          That will increase the amount of network memory buffers, allowing the driver enough headroom for its optimal operation.

                                          see:  https://doc.pfsense.org/index.php/Tuning_and_Troubleshooting_Network_Cards#Intel_igb.284.29_and_em.284.29_Cards

                                          the kernel doesn't panic when you exhaust mbufs, it panics when you set this limit too high (and your number is too high), because
                                          the system runs out of memory.

                                          For each mbuf cluster there is “mbuf” structure needed.  These each consume 256 bytes, and are used to organize mbuf clusters in chains. An mbuf cluster takes another 2048 bytes (or more, for jumbo frames).  There’s possibility to store some additional useful 100B data into the mbuf, but it is not always used.

                                          When there are no free mbuf clusters available, FreeBSD enters the zonelimit state and stops answering network requests. You can see it as the zoneli state in the output of the top command.  It doesn't panic, it appears to 'freeze' for network activity.

                                          If  your box has 1GB of RAM or more, 25K mbuf clusters will be created by default.  Occasionally this is not enough.  If it is, then perhaps doubling that value, and maybe doubling again, are in order.  But 1M mbuf clusters?  Are you serious?

                                          You just advised people to consume 1,000,000 mbuf clusters (at 2K each).  Let me know if I need to explain how much RAM you needlessly advised people to allocate for no good purpose.

                                          I am well-aware that someone wrote something completely uninformed here: https://doc.pfsense.org/index.php/Tuning_and_Troubleshooting_Network_Cards#mbuf_.2F_nmbclusters
                                          so please don't quote it back to me.

                                          Thank you for the education.  I'll remove that from the configuration.

                                          1 Reply Last reply Reply Quote 0
                                          • D
                                            docwho76
                                            last edited by

                                            @gonzopancho:

                                            https://snapshots.pfsense.org/FreeBSD_releng/10.1/amd64/pfSense_RELENG_2_2/livecd_installer/pfSense-memstick-ADI-2.2.2-DEVELOPMENT-amd64-20150401-1519.img.gz

                                            So I just downloaded this image and wrote it to a spare USB thumbdrive I had laying around and booted this on my RCC-VE and ran into this:

                                            
SeaBIOS (version SageBIOS-20150314_140038-localhost.localdomain)
Found mainboard Intel Mohon Peak
Relocating init from 0x000ef1b0 to 0x7fb995f0 (size 26960)
Found CBFS header at 0xfffffbe0
CPU Mhz=1750
Found 18 PCI devices (max PCI bus is 04)
Copying MPTABLE from 0x7fbe3e00/7fbe3e10 to 0x000f5970 with length 184
Copying ACPI RSDP from 0x7fbe4e00 to 0x000f5940
Copying SMBIOS entry point from 0x7fbf0400 to 0x000f5920
Using pmtimer, ioport 0x408
Scan for VGA option rom
EHCI init on dev 00:16.0 (regs=0xdfff5420)
Found 2 serial ports
ebda moved from 9f000 to 9e800
AHCI controller at 17.0, iobase dfff4000, irq 15
AHCI controller at 18.0, iobase dfff4800, irq 10
Searching bootorder for: /pci@i0cf8/usb@16/hub@1/storage@1/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@16/hub@1/usb-*@1
USB MSC vendor='' product='USB Flash Memory' rev='1.00' type=0 removable=1
USB MSC blksize=512 sectors=7823296
Searching bootorder for: /pci@i0cf8/usb@16/hub@1/storage@4/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@16/hub@1/usb-*@4
USB MSC vendor='Generic' product='Ultra HS-COMBO' rev='1.98' type=0 removable=1
USB MSC blksize=512 sectors=7471104
Initialized USB HUB (2 ports used)
All threads complete.
Scan for option roms
Running option rom at c000:0003
pmm call arg1=1
pmm call arg1=0
pmm call arg1=1
pmm call arg1=0
Running option rom at c100:0003
pmm call arg1=1
pmm call arg1=1
Running option rom at c200:0003
pmm call arg1=1
pmm call arg1=1
Running option rom at c300:0003
pmm call arg1=1
pmm call arg1=1
Searching bootorder for: /pci@i0cf8/*@14
Searching bootorder for: /pci@i0cf8/*@14,1
Searching bootorder for: /pci@i0cf8/*@14,2
Searching bootorder for: /pci@i0cf8/*@14,3

Press F12 for boot menu.

Searching bootorder for: HALT
drive 0x000f58b0: PCHS=0/0/0 translation=lba LCHS=970/128/63 s=7823296
drive 0x000f5880: PCHS=0/0/0 translation=lba LCHS=926/128/63 s=7471104
Space available for UMB: c4000-f0000, f0000-f5880
Returned 253952 bytes of ZoneHigh
e820 map has 8 items:
  0: 0000000000000000 - 000000000009e800 = 1 RAM
  1: 000000000009e800 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 000000007fbde000 = 1 RAM
  4: 000000007fbde000 - 000000007fe00000 = 2 RESERVED
  5: 00000000e0000000 - 00000000f0000000 = 2 RESERVED
  6: 00000000fee00000 - 00000000fee01000 = 2 RESERVED
  7: 0000000100000000 - 0000000180000000 = 1 RAM
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00
-
          __ ____
   _ __  / _/ ___|  ___ _ __  ___  ___
  | '_ \| |_\___ \ / _ \ '_ \/ __|/ _ \
  | |_) |  _|___) |  __/ | | \__ \  __/
  | .__/|_| |____/ \___|_| |_|___/\___|
  |_|

 +------------Welcome to pfSense-----------+
 |                                         |                 ______
 |  1\. Boot Multi User [Enter]             |                /      \
 |  2\. Boot [s]ingle User                  |          _____/    f   \
 |  3\. [Esc]ape to loader prompt           |         /     \        /
 |  4\. Reboot                              |        /   p   \______/  Sense
 |                                         |        \       /      \
 |  Options:                               |         \_____/        \
 |  5\. [K]ernel: kernel (1 of 2)           |               \        /
 |  6\. Configure Boot [O]ptions...         |                \______/
 |                                         |
 |                                         |
 |                                         |
 +-----------------------------------------+
   Autoboot in 8 seconds. [Space] to pause

To get back to the menu, type `menu' and press ENTER
or type `boot' and press ENTER to start pfSense.

Type '?' for a list of commands, 'help' for more detailed help.
OK set kern.cam.boot_delay="10000"
OK boot
/boot/kernel/kernel text=0x121d198 data=0x881b18+0x357620 syms=[0x8+0x16e450+0x8+0x16b5c6]
Booting...
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE-p8 #0 9387a83(releng/10.1)-dirty: Wed Apr  1 16:08:38 CDT 2015
    root@pfs22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10 amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Atom(TM) CPU  C2358  @ 1.74GHz (1750.04-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x406d8  Family = 0x6  Model = 0x4d  Stepping = 8
  Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x43d8e3bf <sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,movbe,popcnt,tscdlt,aesni,rdrand>AMD Features=0x28100800 <syscall,nx,rdtscp,lm>AMD Features2=0x101 <lahf,prefetch>Structured Extended Features=0x2282 <tscadj,smep,erms>VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 6442450944 (6144 MB)
avail memory = 4059717632 (3871 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <core  coreboot="">
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
random device not loaded; using insecure entropy
ioapic0 <version 2.0=""> irqs 0-23 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8060b270, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8060b320, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8060b3d0, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80632a40, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80632af0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80632ba0, 0) error 1
random: <software, yarrow=""> initialized
module_register_init: MOD_LOAD (vesa, 0xffffffff80fbf2c0, 0) error 19
kbd0 at kbdmux0
cryptosoft0: <software crypto=""> on motherboard
padlock0: No ACE support.
acpi0: <core coreboot=""> on motherboard
acpi0: Power Button (fixed)
hpet0: <high precision="" event="" timer=""> iomem 0xfed03000-0xfed033ff on acpi0
hpet0: invalid period
device_attach: hpet0 attach returned 6
cpu0: <acpi cpu=""> on acpi0
cpu1: <acpi cpu=""> on acpi0
hpet0: <high precision="" event="" timer=""> iomem 0xfed03000-0xfed033ff on acpi0
hpet0: invalid period
device_attach: hpet0 attach returned 6
atrtc0: <at realtime="" clock=""> port 0x70-0x77 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <at timer=""> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus=""> on pcib0
pcib1: <acpi pci-pci="" bridge=""> mem 0xdfec0000-0xdfedffff irq 16 at device 1.0 on pci0
pci1: <acpi pci="" bus=""> on pcib1
pcib2: <acpi pci-pci="" bridge=""> mem 0xdfee0000-0xdfefffff irq 19 at device 2.0 on pci0
pci2: <acpi pci="" bus=""> on pcib2
pcib3: <acpi pci-pci="" bridge=""> mem 0xdff00000-0xdff1ffff irq 20 at device 3.0 on pci0
pci3: <acpi pci="" bus=""> on pcib3
pcib4: <acpi pci-pci="" bridge=""> mem 0xdff20000-0xdff3ffff irq 23 at device 4.0 on pci0
pci4: <acpi pci="" bus=""> on pcib4
pci0: <processor> at device 11.0 (no driver attached)
pci0: <base peripheral,="" iommu=""> at device 15.0 (no driver attached)
igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0=""> port 0x1000-0x101f mem 0xdff60000-0xdff7ffff,0xdffe4000-0xdffe7fff irq 18 at device 20.0 on pci0
igb0: Using MSIX interrupts with 3 vectors
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0=""> port 0x1020-0x103f mem 0xdff80000-0xdff9ffff,0xdffe8000-0xdffebfff irq 19 at device 20.1 on pci0
igb1: Using MSIX interrupts with 3 vectors
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0=""> port 0x1040-0x105f mem 0xdffa0000-0xdffbffff,0xdffec000-0xdffeffff irq 20 at device 20.2 on pci0
igb2: Using MSIX interrupts with 3 vectors
igb2: Bound queue 0 to cpu 0
igb2: Bound queue 1 to cpu 1
igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0=""> port 0x1060-0x107f mem 0xdffc0000-0xdffdffff,0xdfff0000-0xdfff3fff irq 21 at device 20.3 on pci0
igb3: Using MSIX interrupts with 3 vectors
igb3: Bound queue 0 to cpu 0
igb3: Bound queue 1 to cpu 1
ehci0: <intel avoton="" usb="" 2.0="" controller=""> mem 0xdfff5400-0xdfff57ff irq 22 at device 22.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
ahci0: <intel avoton="" ahci="" sata="" controller=""> port 0x10c0-0x10c7,0x10e0-0x10e3,0x10c8-0x10cf,0x10e4-0x10e7,0x1080-0x109f mem 0xdfff4000-0xdfff47ff irq 23 at device 23.0 on pci0
ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
ahci1: <intel avoton="" ahci="" sata="" controller=""> port 0x10d0-0x10d7,0x10e8-0x10eb,0x10d8-0x10df,0x10ec-0x10ef,0x10a0-0x10bf mem 0xdfff4800-0xdfff4fff irq 16 at device 24.0 on pci0
ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
isab0: <pci-isa bridge=""> at device 31.0 on pci0
isa0: <isa bus=""> on isab0
ppc0: cannot reserve I/O port range
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 on isa0
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
uart1: console (115200,n,8,1)
est0: <enhanced speedstep="" frequency="" control=""> on cpu0
p4tcc0: <cpu frequency="" thermal="" control=""> on cpu0
est1: <enhanced speedstep="" frequency="" control=""> on cpu1
p4tcc1: <cpu frequency="" thermal="" control=""> on cpu1
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
random: unblocking device.
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <intel> at usbus0
uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus0
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <vendor 0x8087=""> at usbus0
uhub1: <vendor 2="" 9="" 0x8087="" product="" 0x07db,="" class="" 0,="" rev="" 2.00="" 0.02,="" addr=""> on usbus0
uhub1: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x0930=""> at usbus0
umass0: <vendor 0="" 3="" 0x0930="" usb="" flash="" memory,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus0
ugen0.4: <generic> at usbus0
umass1: <generic 0="" 4="" ultra="" fast="" media,="" class="" 0,="" rev="" 2.00="" 1.98,="" addr=""> on usbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: < USB Flash Memory 1.00> Removable Direct Access SCSI-2 device
da0: Serial Number 001372997D4BC031662922E9
da0: 40.000MB/s transfers
da0: 3819MB (7823296 512 byte sectors: 255H 63S/T 486C)
da0: quirks=0x2 <no_6_byte>da1 at umass-sim1 bus 1 scbus1 target 0 lun 0
da1: <generic ultra="" hs-combo="" 1.98=""> Removable Direct Access SCSI-0 device
da1: Serial Number 000000225001
da1: 40.000MB/s transfers
da1: 3648MB (7471104 512 byte sectors: 255H 63S/T 465C)
da1: quirks=0x2 <no_6_byte>(da0:umass-sim0:0:0:0): got CAM status 0x50
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: < USB Flash Memory 1.00> s/n 001372997D4BC031662922E9 detached
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1750043127 Hz quality 1000
(da0:Trying to mount root from ufs:/dev/ufs/pfSense [ro]...
umass-sim0:0:mountroot: waiting for device /dev/ufs/pfSense ...
0:0): Periph destroyed
Mounting from ufs:/dev/ufs/pfSense failed with error 19.

Loader variables:
  vfs.root.mountfrom=ufs:/dev/ufs/pfSense
  vfs.root.mountfrom.options=ro

Manual root filesystem specification:
  <fstype>: <device>[options]
      Mount <device> using filesystem <fstype>
      and with the specified (optional) option list.

    eg. ufs:/dev/da0s1a
        zfs:tank
        cd9660:/dev/acd0 ro
          (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /)

  ?               List valid disk boot devices
  .               Yield 1 second (for background tasks)
  <empty line="">    Abort manual input

mountroot> ?

List of GEOM managed disk devices:
  diskid/DISK-000000225001s3 diskid/DISK-000000225001s2 diskid/DISK-000000225001s1 da1s3 da1s2 da1s1 diskid/DISK-000000225001 da1

mountroot>

Will try this with a different USB thumbdrive just to make sure I dont have a bum drive(its sorta old), but it does seem like the bootseq destroys the USB device I'm booting off of. 

Also, in this 2.2.2 image the pfsense boot menu is missing options I'm used to seeing.[/s]</empty></fstype></device></device></fstype></no_6_byte></generic></no_6_byte></generic></generic></vendor></vendor></vendor></vendor></intel></intel></cpu></enhanced></cpu></enhanced></isa></pci-isa></intel></intel></intel></intel(r)></intel(r)></intel(r)></intel(r)></processor></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></at></at></high></acpi></acpi></high></core></software></software,></version></core ></tscadj,smep,erms></lahf,prefetch></syscall,nx,rdtscp,lm></sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,movbe,popcnt,tscdlt,aesni,rdrand></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>
                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.