Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    [SOLVED] pfSense 2.2(.1) crashing regularly

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    30 Posts 8 Posters 10.0k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • H
      heper
      last edited by

      is that the complete crash dump? could you attach it as a TXT to the post?

      1 Reply Last reply Reply Quote 0
      • D
        drzoidberg33
        last edited by

        @heper:

        is that the complete crash dump? could you attach it as a TXT to the post?

        Thanks, I only saw now that it hadn't pasted the entire log (even though the preview looked fine).

        I have included a pastebin link.

        1 Reply Last reply Reply Quote 0
        • H
          heper
          last edited by

          whats the "LG electronics" device on usb ?

          ugen3.2: <lg electronics="" inc.=""> at usbus3
ugen3.2: <lg electronics="" inc.=""> at usbus3 (disconnected)

Fatal trap 9: general protection fault while in kernel mode</lg></lg>

          seen it twice right before the panic and once where it doesnt show up … could be nothing, but wouldn't hurt to unplug whatever it is.

          1 Reply Last reply Reply Quote 0
          • D
            drzoidberg33
            last edited by

            @heper:

            whats the "LG electronics" device on usb ?

            ugen3.2: <lg electronics="" inc.=""> at usbus3
ugen3.2: <lg electronics="" inc.=""> at usbus3 (disconnected)
 
 
Fatal trap 9: general protection fault while in kernel mode</lg></lg>

            seen it twice right before the panic and once where it doesnt show up … could be nothing, but wouldn't hurt to unplug whatever it is.

            I sometimes plug my phone in to the box to charge, it's hardly ever plugged in though and never crashed while plugged in or directly after unplugging.

            It's probably just easier to roll back to 2.1.5 though, I'm just really lazy :p

            1 Reply Last reply Reply Quote 0
            • D
              drzoidberg33
              last edited by

              Still crashing all the time  :(

              Such a mission to downgrade and set everything up again.

              1 Reply Last reply Reply Quote 0
              • L
                Lo Call
                last edited by

                Hi drzoidberg33

                "never had issues before…" I use to ear a lot theses words.
                The mother fact is that : ...before the problem... there was no problem...
                That's THE definition of the breakdown.  :-X

                -- Before the BREAKDOWN, it was working ... --

                AFAIK, based on years of hardware experience, the hardware malfunctions strongly tend to reveal at the UPGRADE time, or other "changes" time.
                (there is a physical reason to that... But that's of topic)
                But what is ON Topic and I think usefull, is to remember that the hardware go "bad" far more quickly that the code...
                It is it nature !

                Now, before to dowgrade or reinstall or hurt in the lazyness your sweetly refer in reply  « on: March 22, 2015, 01:35:05 am » , may I suggest to you to CHECK the hardware ?
                by EX.
                RAM with MEMTEST86+
                HDD with HDSCAN or SPINRITE or any else of your choice

                The crash happened always with the IP @ the SAME RAM address .... and, you had DISK crashes too...
                (IP = Instruction Pointer, it is a part of the microprocessor that keep the MEMORY ADDRESS where to run the current operation/code)

                So, before to "invest" time in code analysis, it is IMPORTANT to be sure that the code is not unwillingly "mangled" by the hardware.

                Need more help, let me know.

                Cheers.

                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  Any reason you're running a snapshot and not 2.2.1-release? Admittedly your snapshot is from the day before release and they were pretty much stable at that point anyway.  ;)
                  The crashes appear to be in pfctl, do you have some bizarre rule-set? Assuming the upgrade is the issue you may have some rules that can't load in 2.2.X though that should show an error every time you load them so it seem to be something that only occasionally applies.

                  Steve

                  1 Reply Last reply Reply Quote 0
                  • D
                    drzoidberg33
                    last edited by

                    @Lo:

                    Hi drzoidberg33

                    "never had issues before…" I use to ear a lot theses words.
                    The mother fact is that : ...before the problem... there was no problem...
                    That's THE definition of the breakdown.  :-X

                    -- Before the BREAKDOWN, it was working ... --

                    AFAIK, based on years of hardware experience, the hardware malfunctions strongly tend to reveal at the UPGRADE time, or other "changes" time.
                    (there is a physical reason to that... But that's of topic)
                    But what is ON Topic and I think usefull, is to remember that the hardware go "bad" far more quickly that the code...
                    It is it nature !

                    Now, before to dowgrade or reinstall or hurt in the lazyness your sweetly refer in reply  « on: March 22, 2015, 01:35:05 am » , may I suggest to you to CHECK the hardware ?
                    by EX.
                    RAM with MEMTEST86+
                    HDD with HDSCAN or SPINRITE or any else of your choice

                    The crash happened always with the IP @ the SAME RAM address .... and, you had DISK crashes too...
                    (IP = Instruction Pointer, it is a part of the microprocessor that keep the MEMORY ADDRESS where to run the current operation/code)

                    So, before to "invest" time in code analysis, it is IMPORTANT to be sure that the code is not unwillingly "mangled" by the hardware.

                    Need more help, let me know.

                    Cheers.

                    Thanks for taking the time to respond.

                    I'll run a memtest and replace the drive while I'm at it. I agree that it could be a hardware issue, so I'll check that.

                    I cannot make sense of these crash logs and was hoping somebody could maybe point out a specific area to check without me having to waste a bunch of time testing everything.

                    Cheers.

                    1 Reply Last reply Reply Quote 0
                    • D
                      drzoidberg33
                      last edited by

                      @stephenw10:

                      Any reason you're running a snapshot and not 2.2.1-release? Admittedly your snapshot is from the day before release and they were pretty much stable at that point anyway.  ;)
                      The crashes appear to be in pfctl, do you have some bizarre rule-set? Assuming the upgrade is the issue you may have some rules that can't load in 2.2.X though that should show an error every time you load them so it seem to be something that only occasionally applies.

                      Steve

                      Yes, I had updated to the latest snapshot (at the time) hoping it would help (coming from 2.2). I updated to the release version the other night but the issue remains still.

                      I am using pfblocker, although I tested also with only the bare essentials (vanilla install) to see if it was something like pfblocker and it would still crash, so I just enabled it again.

                      I'm going to try and test my hardware as suggested above, if all else fails I'll revert to 2.1.5.

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        It could be an issue with some device in your hardware that wasn't supported at all under FreeBSD 8.X but now is to some extent in 10.1. There have  been a few with acpi devices due to that.
                        You might also try a 2.2.2 snapshot.

                        Steve

                        1 Reply Last reply Reply Quote 0
                        • D
                          drzoidberg33
                          last edited by

                          @stephenw10:

                          It could be an issue with some device in your hardware that wasn't supported at all under FreeBSD 8.X but now is to some extent in 10.1. There have  been a few with acpi devices due to that.
                          You might also try a 2.2.2 snapshot.

                          Steve

                          Thanks! I'll try all the above suggestions, I'm really getting annoyed with these random crashes now.

                          1 Reply Last reply Reply Quote 0
                          • D
                            drzoidberg33
                            last edited by

                            Well I've ruled out a memory issue, ran full memtest last night and all okay.

                            Going to install 2.2.2 to a new drive and see how that goes, then will install 2.1.5 back to the old drive.

                            1 Reply Last reply Reply Quote 0
                            • D
                              drzoidberg33
                              last edited by

                              I've given up on 2.2.x.

                              I tried everything. Memory checks out, replaced the disk, replaced the SATA cable, changed every conceivable BIOS setting.

                              Things just got worse, after installing 2.2.2 once the system crashed it wouldn't be able to boot again. It would start booting but then it would take like 2 seconds for each character to appear on the screen (very weird).

                              Reinstalled 2.1.5 tried to replicate the same by doing a dirty power off and it booted just fine.

                              Happy staying with 2.1.5 for now, there is obviously something I have that 2.2.2 doesn't like.

                              Here is a video I took of the weird boot issue:

                              https://youtu.be/MPO5nAkVm7o

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                The super slow boot is a known issue. https://doc.pfsense.org/index.php/UpgradeGuide#pfSense_2.2.2_Upgrade_Notes
                                Disable your serial port if you're not using it.

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • D
                                  drzoidberg33
                                  last edited by

                                  @stephenw10:

                                  The super slow boot is a known issue. https://doc.pfsense.org/index.php/UpgradeGuide#pfSense_2.2.2_Upgrade_Notes
                                  Disable your serial port if you're not using it.

                                  Steve

                                  Thanks! The original crashing problem still exists in 2.2.2 for me though, so for now staying with 2.1.5.

                                  1 Reply Last reply Reply Quote 0
                                  • D
                                    drzoidberg33
                                    last edited by

                                    Haven't had one crash since rolling back to 2.1.5. So it is most definitely something with my setup that 2.2.x doesn't like.

                                    I'm going to mark this topic solved.

                                    1 Reply Last reply Reply Quote 0
                                    • C
                                      cmb
                                      last edited by

                                      What's your configuration like? If you wouldn't mind sharing it in its entirety, that would likely be helpful. I'd like to track down what it is that's causing the crash.

                                      1 Reply Last reply Reply Quote 0
                                      • D
                                        drzoidberg33
                                        last edited by

                                        @cmb:

                                        What's your configuration like? If you wouldn't mind sharing it in its entirety, that would likely be helpful. I'd like to track down what it is that's causing the crash.

                                        I'm not at home now, so can't remember the exact model of the motherboard (it's a Zotac ITX board) but here is what is being reported by the system for the rest of the hardware (the nfe0 interface is an onboard 10/100 NIC and re0 is a PCI-e x1 Realtek card):

                                        CPU: Intel(R) Atom(TM) CPU  330  @ 1.60GHz (1600.01-MHz K8-class CPU)
                                          Origin = "GenuineIntel"  Id = 0x106c2  Family = 6  Model = 1c  Stepping = 2
                                          Features=0xbfe9fbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x40e31d <sse3,dtes64,mon,ds_cpl,tm2,ssse3,cx16,xtpr,pdcm,movbe>AMD Features=0x20100800 <syscall,nx,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
                                        real memory  = 4294967296 (4096 MB)
                                        avail memory = 3572338688 (3406 MB)
                                        ACPI APIC Table: <121009 APIC1510>
                                        FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
                                        FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
                                        cpu0 (BSP): APIC ID:  0
                                        cpu1 (AP/HT): APIC ID:  1
                                        cpu2 (AP): APIC ID:  2
                                        cpu3 (AP/HT): APIC ID:  3
                                        ioapic0: Changing APIC ID to 4
                                        ioapic0 <version 1.1="">irqs 0-23 on motherboard
                                        wlan: mac acl policy registered
                                        ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                                        ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                        module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff804abaf0, 0) error 1
                                        ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                                        ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                        module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff804abb90, 0) error 1
                                        ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                                        ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                        module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff804abc30, 0) error 1
                                        kbd1 at kbdmux0
                                        cryptosoft0: <software crypto="">on motherboard
                                        padlock0: No ACE support.
                                        acpi0: <121009 RSDT1510> on motherboard
                                        acpi0: [ITHREAD]
                                        acpi0: Power Button (fixed)
                                        acpi0: reservation of fefe1000, 1000 (3) failed
                                        acpi0: reservation of fee01000, ff000 (3) failed
                                        acpi0: reservation of fec00000, 1000 (3) failed
                                        acpi0: reservation of fee00000, 1000 (3) failed
                                        acpi0: reservation of 0, a0000 (3) failed
                                        acpi0: reservation of 100000, dff00000 (3) failed
                                        Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                                        acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
                                        cpu0: <acpi cpu="">on acpi0
                                        cpu1: <acpi cpu="">on acpi0
                                        cpu2: <acpi cpu="">on acpi0
                                        cpu3: <acpi cpu="">on acpi0
                                        pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                                        pci0: <acpi pci="" bus="">on pcib0
                                        pci0: <memory, ram="">at device 0.1 (no driver attached)
                                        isab0: <pci-isa bridge="">port 0x4f00-0x4fff at device 3.0 on pci0
                                        isa0: <isa bus="">on isab0
                                        pci0: <memory, ram="">at device 3.1 (no driver attached)
                                        pci0: <serial bus,="" smbus="">at device 3.2 (no driver attached)
                                        pci0: <memory, ram="">at device 3.3 (no driver attached)
                                        pci0: <processor>at device 3.5 (no driver attached)
                                        ohci0: <nvidia nforce="" mcp79="" usb="" controller="">mem 0xfae7f000-0xfae7ffff irq 22 at device 4.0 on pci0
                                        ohci0: [ITHREAD]
                                        usbus0: <nvidia nforce="" mcp79="" usb="" controller="">on ohci0
                                        ehci0: <nvidia nforce="" mcp79="" usb="" 2.0="" controller="">mem 0xfae7ec00-0xfae7ecff irq 23 at device 4.1 on pci0
                                        ehci0: [ITHREAD]
                                        usbus1: EHCI version 1.0
                                        usbus1: <nvidia nforce="" mcp79="" usb="" 2.0="" controller="">on ehci0
                                        ohci1: <nvidia nforce="" mcp79="" usb="" controller="">mem 0xfae7d000-0xfae7dfff irq 20 at device 6.0 on pci0
                                        ohci1: [ITHREAD]
                                        usbus2: <nvidia nforce="" mcp79="" usb="" controller="">on ohci1
                                        ehci1: <nvidia nforce="" mcp79="" usb="" 2.0="" controller="">mem 0xfae7e800-0xfae7e8ff irq 21 at device 6.1 on pci0
                                        ehci1: [ITHREAD]
                                        usbus3: EHCI version 1.0
                                        usbus3: <nvidia nforce="" mcp79="" usb="" 2.0="" controller="">on ehci1
                                        pcib1: <acpi pci-pci="" bridge="">at device 9.0 on pci0
                                        pci1: <acpi pci="" bus="">on pcib1
                                        nfe0: <nvidia nforce="" mcp79="" networking="" adapter="">port 0xc080-0xc087 mem 0xfae7c000-0xfae7cfff,0xfae7e400-0xfae7e4ff,0xfae7e000-0xfae7e00f irq 22 at device 10.0 on pci0</nvidia>
                                        miibus0: <mii bus="">on nfe0
                                        rgephy0: <rtl8169s 8110s="" 8211b="" media="" interface="">PHY 3 on miibus0
                                        rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
                                        nfe0: [FILTER]
                                        atapci0: <nvidia nforce="" mcp79="" sata300="" controller="">port 0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f mem 0xfae7a000-0xfae7bfff irq 23 at device 11.0 on pci0
                                        atapci0: [ITHREAD]
                                        atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM supported
                                        ata2: <ata channel="">at channel 0 on atapci0
                                        ata2: [ITHREAD]
                                        ata3: <ata channel="">at channel 1 on atapci0
                                        ata3: [ITHREAD]
                                        ata4: <ata channel="">at channel 2 on atapci0
                                        ata4: [ITHREAD]
                                        ata5: <ata channel="">at channel 3 on atapci0
                                        ata5: [ITHREAD]
                                        ata6: <ata channel="">at channel 4 on atapci0
                                        ata6: [ITHREAD]
                                        ata7: <ata channel="">at channel 5 on atapci0
                                        ata7: [ITHREAD]
                                        pcib2: <acpi pci-pci="" bridge="">irq 20 at device 12.0 on pci0
                                        pci2: <acpi pci="" bus="">on pcib2
                                        pcib3: <acpi pci-pci="" bridge="">at device 16.0 on pci0
                                        pci3: <acpi pci="" bus="">on pcib3
                                        vgapci0: <vga-compatible display="">port 0xdc00-0xdc7f mem 0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xf6000000-0xf7ffffff irq 21 at device 0.0 on pci3
                                        pcib4: <acpi pci-pci="" bridge="">irq 21 at device 21.0 on pci0
                                        pci4: <acpi pci="" bus="">on pcib4
                                        pcib5: <acpi pci-pci="" bridge="">irq 22 at device 22.0 on pci0
                                        pci5: <acpi pci="" bus="">on pcib5
                                        re0: <realtek 8111="" 8168="" b="" c="" cp="" d="" dp="" e="" f="" pcie="" gigabit="" ethernet="">port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff,0xf9ffc000-0xf9ffffff irq 16 at device 0.0 on pci5</realtek> re0: Using 1 MSI-X message
                                        re0: Chip rev. 0x2c000000
                                        re0: MAC rev. 0x00000000
                                        miibus1: <mii bus="">on re0
                                        rgephy1: <rtl8169s 8110s="" 8211b="" media="" interface="">PHY 1 on miibus1
                                        rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
                                        re0: [ITHREAD]
                                        pcib6: <acpi pci-pci="" bridge="">irq 23 at device 23.0 on pci0
                                        pci6: <acpi pci="" bus="">on pcib6
                                        pcib7: <acpi pci-pci="" bridge="">irq 20 at device 24.0 on pci0
                                        pci7: <acpi pci="" bus="">on pcib7
                                        acpi_button0: <power button="">on acpi0
                                        uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                                        uart0: [FILTER]
                                        acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed00fff irq 2,8 on acpi0
                                        Timecounter "HPET" frequency 25000000 Hz quality 900
                                        atrtc0: <at realtime="" clock="">port 0x70-0x71 on acpi0
                                        sc0: <system console="">at flags 0x100 on isa0
                                        sc0: VGA <16 virtual consoles, flags=0x300>
                                        vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                                        atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
                                        atkbd0: <at keyboard="">irq 1 on atkbdc0
                                        kbd0 at atkbd0
                                        atkbd0: [GIANT-LOCKED]
                                        atkbd0: [ITHREAD]
                                        ppc0: cannot reserve I/O port range
                                        p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                                        p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                                        p4tcc2: <cpu frequency="" thermal="" control="">on cpu2
                                        p4tcc3: <cpu frequency="" thermal="" control="">on cpu3
                                        Timecounters tick every 1.000 msec
                                        IPsec: Initialized Security Association Processing.
                                        usbus0: 12Mbps Full Speed USB v1.0
                                        usbus1: 480Mbps High Speed USB v2.0
                                        usbus2: 12Mbps Full Speed USB v1.0
                                        usbus3: 480Mbps High Speed USB v2.0
                                        ad4: 152587MB <samsung he160hj="" jf800-24="">at ata2-master UDMA100 SATA 3Gb/s</samsung>
                                        ugen0.1: <nvidia>at usbus0
                                        uhub0: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                                        ugen1.1: <nvidia>at usbus1
                                        uhub1: <nvidia 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1
                                        ugen2.1: <nvidia>at usbus2
                                        uhub2: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
                                        ugen3.1: <nvidia>at usbus3
                                        uhub3: <nvidia 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus3
                                        uhub0: 6 ports with 6 removable, self powered
                                        uhub2: 6 ports with 6 removable, self powered
                                        uhub1: 6 ports with 6 removable, self powered
                                        uhub3: 6 ports with 6 removable, self powered
                                        SMP: AP CPU #3 Launched!
                                        SMP: AP CPU #1 Launched!
                                        SMP: AP CPU #2 Launched!
                                        Trying to mount root from ufs:/dev/ad4s1a
                                        ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
                                                    to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
                                        ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
                                                    Consider tuning vm.kmem_size and vm.kmem_size_max
                                                    in /boot/loader.conf.
                                        ZFS filesystem version 5
                                        ZFS storage pool version 28
                                        coretemp0: <cpu on-die="" thermal="" sensors="">on cpu0
                                        coretemp1: <cpu on-die="" thermal="" sensors="">on cpu1
                                        coretemp2: <cpu on-die="" thermal="" sensors="">on cpu2
                                        coretemp3: <cpu on-die="" thermal="" sensors="">on cpu3</cpu></cpu></cpu></cpu></nvidia></nvidia></nvidia></nvidia></nvidia></nvidia></nvidia></nvidia></cpu></cpu></cpu></cpu></at></keyboard></generic></system></at></high></power></acpi></acpi></acpi></acpi></rtl8169s></mii></acpi></acpi></acpi></acpi></vga-compatible></acpi></acpi></acpi></acpi></ata></ata></ata></ata></ata></ata></nvidia></rtl8169s></mii></acpi></acpi></nvidia></nvidia></nvidia></nvidia></nvidia></nvidia></nvidia></nvidia></processor></memory,></serial></memory,></isa></pci-isa></memory,></acpi></acpi></acpi></acpi></acpi></acpi></software></version></lahf></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,tm2,ssse3,cx16,xtpr,pdcm,movbe></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

                                        1 Reply Last reply Reply Quote 0
                                        • C
                                          cmb
                                          last edited by

                                          Thanks, that might be helpful, though from the crash report I'm thinking it's not hardware-specific. I was more curious what software features you're using.

                                          1 Reply Last reply Reply Quote 0
                                          • D
                                            drzoidberg33
                                            last edited by

                                            I just want to update this thread.

                                            After rolling back to 2.1.5 I noticed that it was still crashing every now and then (although not anywhere near as much as with 2.2.2). I've come to the conclusion that it must be something with my system.

                                            I'm replacing the motherboard/cpu/memory this week with new hardware and will try install 2.2.2 again and see if that helps.

                                            Thanks for all the feedback so far.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.