PFSENSE 2.2.2 Nano Serial | Firebox X1250e CORE with UDMA 4GB CF DMA ISSUE!
-
Hardware/Software: PFSENSE 2.2.2 Nano Serial | Boot 8.1 | Firebox X1250e CORE with UDMA 4GB CF Sandisk
Getting the famous DMA Error.
Tried the following flags:
1:
"set hint.ata.0.mode=PIO4
boot"set hint.ata.0.mode=PIO4
boothttps://forum.pfsense.org/index.php?topic=20095.msg480824#msg480824
2: set hw.ata.atapi_dma="1"
set hw.ata.ata_dma="1"
set hw.ata.wc="1"
bootForgot source
I also tried to enable and disable DMA within the BIOS, changed Modes and tried Auto on the CF Card instead of Manual/CHS/Head 2.
Need some help I am scratching my head. Is it that the Sandisk is not compatible?
Help would be most appreciated.Copyright (C) 1984-2003, Phoenix Technologies, LTD (E17HDD) MOD V0.81 console on com1 115200\. Stephenw10 12/4/2014 Main Processor : Genuine Intel(R) processor 1.30GHz(100x13.0) Memory Testing : 516096K OK + 8M shared memory IDE Channel 0 Slave : None Phoenix Technologies, LTD System Configurations +==============================================================================+ | CPU Type : Genuine Intel(R) processor Base Memory : 640K | | CPU ID/uco: 0695/45 Extended Memory : 515072K | | CPU Clock : 1.30GHz Cache Memory : 512K | |------------------------------------------------------------------------------| | Pri. Master Disk : CHS,PIO 4, 500MB Display Type : EGA/VGA | | Pri. Slave Disk : None Serial Port(s) : 3F8 2F8 | | Sec. Master Disk : None Parallel Port(s) : 378 | | Sec. Slave Disk : None DDR2 at Bank(s) : 0 | +==============================================================================+ PCI device listing ... Bus No. Device No. Func No. Vendor/Device Class Device Class IRQ -------------------------------------------------------------------------------- 0 2 0 8086 2592 0300 Display Cntrlr 11 0 29 0 8086 2658 0C03 USB 1.0/1.1 UHCI Cntrlr 9 0 29 1 8086 2659 0C03 USB 1.0/1.1 UHCI Cntrlr 10 0 29 2 8086 265A 0C03 USB 1.0/1.1 UHCI Cntrlr 5 0 29 3 8086 265B 0C03 USB 1.0/1.1 UHCI Cntrlr 11 0 29 7 8086 265C 0C03 USB 2.0 EHCI Cntrlr 9 0 31 1 8086 266F 0101 IDE Cntrlr 14 5 4 0 177D 0003 1000 En/Decryption Cntrlr 11 1 pfSense 2 pfSense F6 PXE Boot: 1 /boot/config: -h Consoles: serial port BIOS drive C: is disk0 BIOS 638kB/515072kB available memory FreeBSD/x86 bootstrap loader, Revision 1.1 (root@pfs22-i386-builder, Mon Apr 13 20:28:31 CDT 2015) Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x11fb1a7 data=0x832e48+0x279e60 syms=[0x4+0xf3a10+0x4+0x16bd76] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... KDB: debugger backends: ddb KDB: current backend: ddb mptable_probe: MP Config Table has bad signature: ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223) Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.1-RELEASE-p9 #0 57b23e7(releng/10.1)-dirty: Mon Apr 13 20:37:21 CDT 2015 root@pfs22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_wrap.10.i386 i386 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 VT: running with driver "vga". CPU: Intel(R) Celeron(R) M processor 1300MHz (1300.08-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Family = 0x6 Model = 0x9 Stepping = 5 Features=0xa7e9fbbf <fpu,vme,de,pse,tsc,msr,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,tm,pbe>real memory = 528482304 (504 MB) avail memory = 481378304 (459 MB) random device not loaded; using insecure entropy ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xc080ef30, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc080efe0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc080f090, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xc08376c0, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc0837770, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc0837820, 0) error 1 wlan: mac acl policy registered kbd1 at kbdmux0 random: <software, yarrow="">initialized ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. cryptosoft0: <software crypto="">on motherboard padlock0: No ACE support. pcib0 pcibus 0 on motherboard pir0: <pci 15="" interrupt="" routing="" table:="" entries="">on motherboard pci0: <pci bus="">on pcib0 vgapci0: <vga-compatible display="">port 0xea00-0xea07 mem 0xd0500000-0xd057ffff,0xc0000000-0xcfffffff,0xd0580000-0xd05bffff irq 11 at device 2.0 on pci0 agp0: <intel 82915gm="" (915gm="" gmch)="" svga="" controller="">on vgapci0 agp0: aperture size is 256M, detected 7932k stolen memory vgapci0: Boot video device pcib1: <pcibios pci-pci="" bridge="">irq 11 at device 28.0 on pci0 pci1: <pci bus="">on pcib1 mskc0: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0x8000-0x80ff mem 0xd0020000-0xd0023fff irq 11 at device 0.0 on pci1 msk0: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc0 miibus0: <mii bus="">on msk0 e1000phy0: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow pcib2: <pcibios pci-pci="" bridge="">irq 12 at device 28.1 on pci0 pci2: <pci bus="">on pcib2 mskc1: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0x9000-0x90ff mem 0xd0120000-0xd0123fff irq 12 at device 0.0 on pci2 msk1: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc1 miibus1: <mii bus="">on msk1 e1000phy1: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus1 e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow pcib3: <pcibios pci-pci="" bridge="">irq 5 at device 28.2 on pci0 pci3: <pci bus="">on pcib3 mskc2: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0xa000-0xa0ff mem 0xd0220000-0xd0223fff irq 5 at device 0.0 on pci3 msk2: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc2 miibus2: <mii bus="">on msk2 e1000phy2: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus2 e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow pcib4: <pcibios pci-pci="" bridge="">irq 10 at device 28.3 on pci0 pci4: <pci bus="">on pcib4 mskc3: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0xb000-0xb0ff mem 0xd0320000-0xd0323fff irq 10 at device 0.0 on pci4 msk3: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc3 miibus3: <mii bus="">on msk3 e1000phy3: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus3 e1000phy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow uhci0: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-a="">port 0xeb00-0xeb1f irq 9 at device 29.0 on pci0 usbus0 on uhci0 uhci1: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-b="">port 0xed00-0xed1f irq 10 at device 29.1 on pci0 usbus1 on uhci1 uhci2: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-c="">port 0xe800-0xe81f irq 5 at device 29.2 on pci0 usbus2 on uhci2 uhci3: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-d="">port 0xe900-0xe91f irq 11 at device 29.3 on pci0 usbus3 on uhci3 ehci0: <intel 82801fb="" (ich6)="" usb="" 2.0="" controller="">mem 0xd05c0000-0xd05c03ff irq 9 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 pcib5: <pcibios pci-pci="" bridge="">at device 30.0 on pci0 pci5: <pci bus="">on pcib5 skc0: <marvell gigabit="" ethernet="">port 0xc000-0xc0ff mem 0xd042c000-0xd042ffff irq 11 at device 0.0 on pci5 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <marvell semiconductor,="" inc.="" yukon="">on skc0 miibus4: <mii bus="">on sk0 e1000phy4: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus4 e1000phy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc1: <marvell gigabit="" ethernet="">port 0xc400-0xc4ff mem 0xd0420000-0xd0423fff irq 12 at device 1.0 on pci5 skc1: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk1: <marvell semiconductor,="" inc.="" yukon="">on skc1 miibus5: <mii bus="">on sk1 e1000phy5: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus5 e1000phy5: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc2: <marvell gigabit="" ethernet="">port 0xc800-0xc8ff mem 0xd0424000-0xd0427fff irq 5 at device 2.0 on pci5 skc2: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk2: <marvell semiconductor,="" inc.="" yukon="">on skc2 miibus6: <mii bus="">on sk2 e1000phy6: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus6 e1000phy6: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc3: <marvell gigabit="" ethernet="">port 0xcc00-0xccff mem 0xd0428000-0xd042bfff irq 10 at device 3.0 on pci5 skc3: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk3: <marvell semiconductor,="" inc.="" yukon="">on skc3 miibus7: <mii bus="">on sk3 e1000phy7: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus7 e1000phy7: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto pci5: <encrypt decrypt,="" network="" computer="" crypto="">at device 4.0 (no driver attached) isab0: <pci-isa bridge="">at device 31.0 on pci0 isa0: <isa bus="">on isab0 atapci0: <intel ich6="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0 ata0: <ata channel="">at channel 0 on atapci0 ata1: <ata channel="">at channel 1 on atapci0 cpu0 on motherboard p4tcc0: <cpu frequency="" thermal="" control="">on cpu0 pmtimer0 on isa0 attimer0: <at timer="">at port 0x40-0x43 irq 0 pnpid PNP0100 on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <at realtime="" clock="">at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0 Event timer "RTC" frequency 32768 Hz quality 0 atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0 atkbd0: <at keyboard="">irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] unknown: <pnp0c01>can't assign resources (memory) uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0 uart0: console (115200,n,8,1) ppc0: <standard parallel="" printer="" port="">at port 0x378-0x37f,0x778-0x77b irq 7 pnpid PNP0400 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <parallel port="" bus="">on ppc0 lpt0: <printer>on ppbus0 lpt0: Interrupt-driven port ppi0: <parallel i="" o="">on ppbus0 uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0 orm0: <isa option="" rom="">at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 unknown: <pnp0c01>can't assign resources (memory) Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ugen0.1: <intel>at usbus0 uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0 ugen1.1: <intel>at usbus1 uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1 ugen2.1: <intel>at usbus2 uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2 ugen3.1: <intel>at usbus3 uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3 ugen4.1: <intel>at usbus4 uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4 ata0: DMA limited to UDMA33, controller found non-ATA66 cable ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <sandisk sdcfx-004g="" hdx="" 6.03="">CFA-0 device ada0: Serial Number CJZ092413191905 ada0: 33.300MB/s transfers (UDMA2, PIO 512bytes) ada0: 3815MB (7813120 512 byte sectors: 16H 63S/T 7751C) ada0: Previously was known as ad0 Timecounter "TSC" frequency 1300076366 Hz quality 800 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 8 ports with 8 removable, self powered (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 fe 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable</sandisk></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></pnp0c01></isa></parallel></printer></parallel></standard></pnp0c01></at></keyboard></at></at></cpu></ata></ata></intel></isa></pci-isa></encrypt></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></pci></pcibios></intel></intel></intel></intel></intel></marvell></mii></marvell></marvell></pci></pcibios></marvell></mii></marvell></marvell></pci></pcibios></marvell></mii></marvell></marvell></pci></pcibios></marvell></mii></marvell></marvell></pci></pcibios></intel></vga-compatible></pci></pci></software></software,></fpu,vme,de,pse,tsc,msr,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,tm,pbe>
-
The first line you tried should allow you to get past that. You have a set of speech marks in there that shouln't be, probably just a typo.
Setting the DMA options in the BIOS doesn't prevent that error. Leave them at the defaults unless you have a good reason not to.Steve
-
The speech marks were added when I posted the code and did not continue with those as the second code has the "1" on it. I will set everything default and try this once more. When you say default are you referring to setting the CF to auto as well?
-
Changed BIOS to "Optimized Defaults" SAVE/EXIT
This is the resulting code, I left it running for a while and it went to "MOUNTROOT"
Phoenix - AwardBIOS v6.00PG, An Energy Star Ally Copyright (C) 1984-2003, Phoenix Technologies, LTD (E17HDD) MOD V0.81 console on com1 115200\. Stephenw10 12/4/2014 Main Processor : Genuine Intel(R) processor 1.30GHz(100x13.0) Memory Testing : 516096K OK + 8M shared memory IDE Channel 0 Master : SanDisk SDCFX-004G HDX 6.03 IDE Channel 0 Slave : None Phoenix Technologies, LTD System Configurations +==============================================================================+ | CPU Type : Genuine Intel(R) processor Base Memory : 640K | | CPU ID/uco: 0695/45 Extended Memory : 515072K | | CPU Clock : 1.30GHz Cache Memory : 512K | |------------------------------------------------------------------------------| | Pri. Master Disk : CHS,PIO 4, 4000MB Display Type : EGA/VGA | | Pri. Slave Disk : None Serial Port(s) : 3F8 2F8 | | Sec. Master Disk : None Parallel Port(s) : 378 | | Sec. Slave Disk : None DDR2 at Bank(s) : 0 | +==============================================================================+ PCI device listing ... Bus No. Device No. Func No. Vendor/Device Class Device Class IRQ -------------------------------------------------------------------------------- 0 2 0 8086 2592 0300 Display Cntrlr 11 0 29 0 8086 2658 0C03 USB 1.0/1.1 UHCI Cntrlr 9 0 29 1 8086 2659 0C03 USB 1.0/1.1 UHCI Cntrlr 12 0 29 2 8086 265A 0C03 USB 1.0/1.1 UHCI Cntrlr 10 0 29 3 8086 265B 0C03 USB 1.0/1.1 UHCI Cntrlr 11 0 29 7 8086 265C 0C03 USB 2.0 EHCI Cntrlr 9 0 31 3 8086 266A 0C05 SMBus Cntrlr 12 1 0 0 11AB 4362 0200 Network Cntrlr 11 3 0 0 11AB 4362 0200 Network Cntrlr 10 4 0 0 11AB 4362 0200 Network Cntrlr 12 5 0 0 11AB 4320 0200 Network Cntrlr 11 5 1 0 11AB 4320 0200 Network Cntrlr 5 5 2 0 11AB 4320 0200 Network Cntrlr 10 5 3 0 11AB 4320 0200 Network Cntrlr 12 5 4 0 177D 0003 1000 En/Decryption Cntrlr 11 1 pfSense 2 pfSense F6 PXE Boot: 1 /boot/config: -h Consoles: serial port BIOS drive C: is disk0 BIOS 638kB/515072kB available memory FreeBSD/x86 bootstrap loader, Revision 1.1 (root@pfs22-i386-builder, Mon Apr 13 20:28:31 CDT 2015) Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x11fb1a7 data=0x832e48+0x279e60 syms=[0x4+0xf3a10+0x4+0x16bd76] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 4 seconds... Type '?' for a list of commands, 'help' for more detailed help. OK set hint.ata.0.mode=PI04 OK boot Booting... KDB: debugger backends: ddb KDB: current backend: ddb ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223) Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.1-RELEASE-p9 #0 57b23e7(releng/10.1)-dirty: Mon Apr 13 20:37:21 CDT 2015 root@pfs22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_wrap.10.i386 i386 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 VT: running with driver "vga". CPU: Intel(R) Celeron(R) M processor 1300MHz (1300.08-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Family = 0x6 Model = 0x9 Stepping = 5 Features=0xa7e9fbbf <fpu,vme,de,pse,tsc,msr,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,tm,pbe>real memory = 528482304 (504 MB) avail memory = 481378304 (459 MB) MPTable: <oem00000 prod00000000="">Event timer "LAPIC" quality 400 random device not loaded; using insecure entropy ioapic0: Assuming intbase of 0 ioapic0 <version 2.0="">irqs 0-23 on motherboard ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xc080ef30, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc080efe0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc080f090, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xc08376c0, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc0837770, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc0837820, 0) error 1 wlan: mac acl policy registered kbd1 at kbdmux0 random: <software, yarrow="">initialized ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. cryptosoft0: <software crypto="">on motherboard padlock0: No ACE support. pcib0: <mptable host-pci="" bridge="">pcibus 0 on motherboard pci0: <pci bus="">on pcib0 vgapci0: <vga-compatible display="">port 0xea00-0xea07 mem 0xd0400000-0xd047ffff,0xc0000000-0xcfffffff,0xd0480000-0xd04bffff irq 16 at device 2.0 on pci0 agp0: <intel 82915gm="" (915gm="" gmch)="" svga="" controller="">on vgapci0 agp0: aperture size is 256M, detected 7932k stolen memory vgapci0: Boot video device pcib1: <mptable pci-pci="" bridge="">irq 16 at device 28.0 on pci0 pci1: <pci bus="">on pcib1 mskc0: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0x9000-0x90ff mem 0xd0020000-0xd0023fff irq 16 at device 0.0 on pci1 msk0: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc0 miibus0: <mii bus="">on msk0 e1000phy0: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow pcib2: <pci-pci bridge="">irq 17 at device 28.1 on pci0 pci2: <pci bus="">on pcib2 pcib3: <mptable pci-pci="" bridge="">irq 18 at device 28.2 on pci0 pci3: <pci bus="">on pcib3 mskc1: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0xa000-0xa0ff mem 0xd0120000-0xd0123fff irq 18 at device 0.0 on pci3 msk1: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc1 miibus1: <mii bus="">on msk1 e1000phy1: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus1 e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow pcib4: <mptable pci-pci="" bridge="">irq 19 at device 28.3 on pci0 pci4: <pci bus="">on pcib4 mskc2: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0xb000-0xb0ff mem 0xd0220000-0xd0223fff irq 19 at device 0.0 on pci4 msk2: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc2 miibus2: <mii bus="">on msk2 e1000phy2: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus2 e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow uhci0: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-a="">port 0xeb00-0xeb1f irq 23 at device 29.0 on pci0 usbus0 on uhci0 uhci1: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-b="">port 0xed00-0xed1f irq 19 at device 29.1 on pci0 usbus1 on uhci1 uhci2: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-c="">port 0xe800-0xe81f irq 18 at device 29.2 on pci0 usbus2 on uhci2 uhci3: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-d="">port 0xe900-0xe91f irq 16 at device 29.3 on pci0 usbus3 on uhci3 ehci0: <intel 82801fb="" (ich6)="" usb="" 2.0="" controller="">mem 0xd04c0000-0xd04c03ff irq 23 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 pcib5: <mptable pci-pci="" bridge="">at device 30.0 on pci0 pci5: <pci bus="">on pcib5 skc0: <marvell gigabit="" ethernet="">port 0xc000-0xc0ff mem 0xd032c000-0xd032ffff irq 16 at device 0.0 on pci5 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <marvell semiconductor,="" inc.="" yukon="">on skc0 miibus3: <mii bus="">on sk0 e1000phy3: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus3 e1000phy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc1: <marvell gigabit="" ethernet="">port 0xc400-0xc4ff mem 0xd0320000-0xd0323fff irq 17 at device 1.0 on pci5 skc1: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk1: <marvell semiconductor,="" inc.="" yukon="">on skc1 miibus4: <mii bus="">on sk1 e1000phy4: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus4 e1000phy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc2: <marvell gigabit="" ethernet="">port 0xc800-0xc8ff mem 0xd0324000-0xd0327fff irq 18 at device 2.0 on pci5 skc2: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk2: <marvell semiconductor,="" inc.="" yukon="">on skc2 miibus5: <mii bus="">on sk2 e1000phy5: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus5 e1000phy5: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc3: <marvell gigabit="" ethernet="">port 0xcc00-0xccff mem 0xd0328000-0xd032bfff irq 19 at device 3.0 on pci5 skc3: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk3: <marvell semiconductor,="" inc.="" yukon="">on skc3 miibus6: <mii bus="">on sk3 e1000phy6: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus6 e1000phy6: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto pci5: <encrypt decrypt,="" network="" computer="" crypto="">at device 4.0 (no driver attached) isab0: <pci-isa bridge="">at device 31.0 on pci0 isa0: <isa bus="">on isab0 atapci0: <intel ich6="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0 ata0: <ata channel="">at channel 0 on atapci0 ata1: <ata channel="">at channel 1 on atapci0 cpu0 on motherboard p4tcc0: <cpu frequency="" thermal="" control="">on cpu0 pmtimer0 on isa0 attimer0: <at timer="">at port 0x40-0x43 irq 0 pnpid PNP0100 on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <at realtime="" clock="">at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0 Event timer "RTC" frequency 32768 Hz quality 0 atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0 atkbd0: <at keyboard="">irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] unknown: <pnp0c01>can't assign resources (memory) uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0 uart0: console (115200,n,8,1) ppc0: <standard parallel="" printer="" port="">at port 0x378-0x37f,0x778-0x77b irq 7 pnpid PNP0400 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <parallel port="" bus="">on ppc0 lpt0: <printer>on ppbus0 lpt0: Interrupt-driven port ppi0: <parallel i="" o="">on ppbus0 uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0 orm0: <isa option="" rom="">at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 unknown: <pnp0c01>can't assign resources (memory) Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 ugen0.1: <intel>at usbus0 uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0 ugen1.1: <intel>at usbus1 uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1 ugen2.1: <intel>at usbus2 uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2 ugen3.1: <intel>at usbus3 uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3 usbus4: 480Mbps High Speed USB v2.0 ugen4.1: <intel>at usbus4 uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4 ata0: DMA limited to UDMA33, controller found non-ATA66 cable ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <sandisk sdcfx-004g="" hdx="" 6.03="">CFA-0 device ada0: Serial Number CJZ092413191905 ada0: 33.300MB/s transfers (UDMA2, PIO 512bytes) ada0: 3815MB (7813120 512 byte sectors: 16H 63S/T 7751C) ada0: Previously was known as ad0 Timecounter "TSC" frequency 1300076288 Hz quality 800 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 8 ports with 8 removable, self powered (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 fe 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 fe 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 fe 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 fe 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 fe 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Error 5, Retries exhausted ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Error 5, Retries exhausted ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Error 5, Retries exhausted ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 ff 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Error 5, Retries exhausted ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 fe 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 fe 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 fe 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 fe 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 fe 37 77 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Error 5, Retries exhausted ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 c1 37 77 40 00 00 00 00 04 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <sandisk sdcfx-004g="" hdx="" 6.03="">s/n CJZ092413191905 detached (ada0:ata0:0:0:0): Periph destroyed Trying to mount root from ufs:/dev/ufs/pfsense0 [ro,sync,noatime]... mountroot: waiting for device /dev/ufs/pfsense0 ... Mounting from ufs:/dev/ufs/pfsense0 failed with error 19. Loader variables: vfs.root.mountfrom=ufs:/dev/ufs/pfsense0 vfs.root.mountfrom.options=ro,sync,noatime Manual root filesystem specification: <fstype>: <device>[options] Mount <device>using filesystem <fstype>and with the specified (optional) option list. eg. ufs:/dev/da0s1a zfs:tank cd9660:/dev/acd0 ro (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /) ? List valid disk boot devices . Yield 1 second (for background tasks) <empty line="">Abort manual input mountroot></empty></fstype></device></device></fstype></sandisk></sandisk></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></pnp0c01></isa></parallel></printer></parallel></standard></pnp0c01></at></keyboard></at></at></cpu></ata></ata></intel></isa></pci-isa></encrypt></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></pci></mptable></intel></intel></intel></intel></intel></marvell></mii></marvell></marvell></pci></mptable></marvell></mii></marvell></marvell></pci></mptable></pci></pci-pci></marvell></mii></marvell></marvell></pci></mptable></intel></vga-compatible></pci></mptable></software></software,></version></oem00000></fpu,vme,de,pse,tsc,msr,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,tm,pbe>
Update
Just tried the 2.2.1 Same Results.
-
Ah, looks like you typed PI0 not PIO.
It's a letter 'O' not a zero.Steve
-
:o Doh!
It was definitely a Typo. Its always good to have a second set of eyes. Thank you for your help.
End Product YT Video: http://youtu.be/Lvb3wu78coU