PFsense, Cisco and VM

[vlibran]

Hi there..
I'm new to networking so forgive me for any dumb question.

I want to setup a Cisco layer 3 switch for internal routing, with a Virtual PFsense on two VMesxi host for redundancy (CARP)

1 - I got the Carp working
2 - I got the internal routing working (Cisco switch)
3 - I could only get the  vlan 3 to connect to the internet.

here is my configuration

CISCO Core switch
Vlan 3                            Vlan 12                      Vlan 15
172.17.2.1/22              172.16.1.1                172.16.8.1            IProute 0.0.0.0 0.0.0.0 172.17.2.250

Port 48 on Core switch connects to port2 on Dell server that has Virtual PFsense

PFsense Virtual IP Lan    172.17.2.250

I try dot1q trunk encapsulation on port 48 did not work
I changed to access mode I was able to connect to the internet, but as mention before, only vlan 3

I really would appropriate any help on this

[gamski3333]

Hi,

Try to add static route in pfsense for the other subnet, so that pfsense knows to route traffic as reply to those concern subnet.

Regards,