PFsense, Cisco and VM
-
Hi there..
I'm new to networking so forgive me for any dumb question.I want to setup a Cisco layer 3 switch for internal routing, with a Virtual PFsense on two VMesxi host for redundancy (CARP)
1 - I got the Carp working
2 - I got the internal routing working (Cisco switch)
3 - I could only get the vlan 3 to connect to the internet.here is my configuration
CISCO Core switch
Vlan 3 Vlan 12 Vlan 15
172.17.2.1/22 172.16.1.1 172.16.8.1 IProute 0.0.0.0 0.0.0.0 172.17.2.250Port 48 on Core switch connects to port2 on Dell server that has Virtual PFsense
PFsense Virtual IP Lan 172.17.2.250
I try dot1q trunk encapsulation on port 48 did not work
I changed to access mode I was able to connect to the internet, but as mention before, only vlan 3I really would appropriate any help on this
-
Hi,
Try to add static route in pfsense for the other subnet, so that pfsense knows to route traffic as reply to those concern subnet.
Regards,