Strange address Shown in the dhcp leases
-
this is what i got
# The format of this file is documented in the dhcpd.leases(5) manual page. # This lease file was written by isc-dhcp-4.2.6 lease 192.168.0.30 { starts 1 2015/05/25 04:04:19; ends 1 2015/05/25 06:04:19; tstp 1 2015/05/25 06:04:19; cltt 1 2015/05/25 04:04:19; binding state free; hardware ethernet 00:1c:85:0d:1d:68; uid "\001\000\034\205\015\035h"; } lease 192.168.0.31 { starts 3 2015/05/27 12:43:26; ends 3 2015/05/27 14:43:26; tstp 3 2015/05/27 14:43:26; cltt 3 2015/05/27 12:43:26; binding state free; hardware ethernet 54:35:30:b1:da:f5; uid "\001T50\261\332\365"; } lease 192.168.0.32 { starts 0 2015/05/31 19:16:46; ends 0 2015/05/31 21:16:46; tstp 0 2015/05/31 21:16:46; cltt 0 2015/05/31 19:16:46; binding state free; hardware ethernet 94:35:0a:23:07:f3; uid "\001\2245\012#\007\363"; } lease 192.168.0.33 { starts 4 2015/06/04 06:42:41; ends 5 2015/06/05 06:42:41; tstp 5 2015/06/05 06:42:41; cltt 4 2015/06/04 06:42:41; binding state free; hardware ethernet 0c:74:c2:e1:78:f9; uid "\001\014t\302\341x\371"; } lease 192.168.0.36 { starts 4 2015/06/11 15:39:16; ends 4 2015/06/11 17:39:16; tstp 4 2015/06/11 17:39:16; cltt 4 2015/06/11 15:39:16; binding state free; hardware ethernet f8:d1:11:16:4b:d9; } lease 192.168.0.35 { starts 4 2015/06/11 15:41:11; ends 4 2015/06/11 17:41:11; tstp 4 2015/06/11 17:41:11; cltt 4 2015/06/11 15:41:11; binding state free; hardware ethernet 00:1b:38:46:27:6b; } lease 192.168.0.37 { starts 4 2015/06/11 15:41:19; ends 4 2015/06/11 17:41:19; tstp 4 2015/06/11 17:41:19; cltt 4 2015/06/11 15:41:19; binding state free; hardware ethernet 00:1c:bf:11:dc:62; } lease 192.168.0.42 { starts 5 2015/06/12 08:38:46; ends 5 2015/06/12 10:38:46; tstp 5 2015/06/12 10:38:46; cltt 5 2015/06/12 08:38:46; binding state free; hardware ethernet 94:35:0a:23:07:f3; uid "\001\2245\012#\007\363"; } server-duid "\000\001\000\001\034c\215 \000\002\263\013\253.";
-
Could it be that someone is trying to get in to the network. Wirelessly ??
If you are suspicious about (wireless) connections, then do ACL, explicitly allow MAC addresses (therefore deny the undefined) in your AP.
-
what is ACL ?
-
Access Control List(s)
In pfSense have look at Services: DHCP server [MAC Address Control]
-
Why don't you look in the actual file for what it shows for the end date, and see what we have..
example
[2.2.2-RELEASE][root@pfSense.local.lan]/var/dhcpd/var/db: cat dhcpd.leaseslease 192.168.2.216 {
starts 6 2015/06/13 12:04:00;
ends 3 2015/06/17 12:04:00;
cltt 6 2015/06/13 12:04:00;
binding state active;
next binding state free;
rewind binding state free;
hardware ethernet ac:fd:ec:62:34:97;
uid "\001\254\375\354b4\227";
client-hostname "Johns-Phone";cltt stands for Client Last Transaction Time, not sure why its showing that vs the end date? I would also track down what device it is, that is clearly an ODD mac..
Where the last line ```
client-hostname "Johns-Phone";It is not registered anything in the output of the command (in my computer) and now it is cltt 6
lease 192.168.0.43 {
starts 6 2015/06/13 21:31:09;
ends never;
cltt 6 2015/06/13 21:31:09;
binding state active;
next binding state free;
rewind binding state free;
hardware ethernet 0000:00:00:00;How exactly do I use with this ACL option I have to enroll all Mac addresses of all computers on the network One by one comma separated it says partial MAC addresses Which part ?
-
edit3
My post was about wireless security, and did not belong here.
I'll not be offended if it gets deleted. http://pastebin.com/QaGHXbU4
/edit 3edit2
Looks like @cmb has a really good answer. Thanks :-)
/edit2 -
…
it says partial MAC addresses
Which part ?http://www.gcstech.net/macvendor/index.php?node=macsea
-
That's a BOOTP lease, which is why it looks weird.
Hostnames are only there where the client sends one. It not having one isn't unusual, especially for the types of devices that do BOOTP.
There are very limited devices that use BOOTP. Generally they're very old (1990s era printers for instance), or atypical embedded devices. It could be some broken device as well.
It seems to be a semi-active device, or at least your time of last contact (cltt) seems to update. If you have a managed switch, try tracking down that MAC address' port and see what's plugged into it. If you don't have a managed switch it'll be harder to track down, though not too difficult if you have a small network. Unplug most things, see if it's still updating. Add things back one by one. See when that comes back. Or just try reaching the device to see what it's running. A nmap scan with OS identification enabled might be telling.
-
checking now but even if it is why would it be set to never expire?
BOOTP leases never expire.
-
That MAC seems to be something a number of other people have seen pulling BOOTP leases, though at a glance through Google results I don't see anyone who found the source of it. Might be worthwhile to dig through those results more closely.
https://www.google.com/webhp?q=%220000:00:00:00%22 -
I know
Already encountered this once
Last time i simply blocked the addressThis time I wanted to know where it came from
-
well track it down – its clearly on your network..
-
I've checked
No device in my network
Have such addressThat's why I ask
I blocked it again
As before -
Yeah it's definitely not a device on my network, this is my home network and every device is accounted for.
Could it possibly be my Dlink router that I'm using as an AP? DHCP is turned off on the router but the wireless does occasionally quit working, especially when it gets warmer out, requiring a power cycle to restore it.
-
Sorry but its has to be something on your network..
Could be something like a media player, dvr, doubt its your dlink.. But sure.. When you delete the lease how long until it comes back? Is it every 24 hours, every 1 hour, every 10 minutes? Does it ping to that IP you gave it?
What interface are you seeing it on? Lan, Wan, Wireless? You don't have a smart switch that shows you mac address table?
-
Shows up on LAN, no smart switch. I'll have to check when I get home to see if it's back again. Had a power outage yesterday and as of last night it wasn't there.
-
Is your lan bridged to your wireless? If showing up on your lan - clearly its on your network ;)
-
No bridge, just DHCP disabled and static IP so it's working as an AP. pfsense is handling all the routing.
Checked my leases and it's not there any more. I dunno, maybe something left over from one of the many VM's I've had running? I'm out of ideas.
-
So your wireless is on the same network as your lan - ie bridged..
-
If that's what "bridged" means then yes. It is on the same subnet as LAN.