Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    APU1D with LTE Huawei ME909u-521

    Scheduled Pinned Locked Moved Hardware
    167 Posts 14 Posters 75.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • ?
      Guest
      last edited by

      In the older MC77xx modules firmware the AT!UDUSBCOMP= setting showed nothing. With newer firmware we get this.

      So notice how this module has QMI only.

      Newer MC73xx modules support both MBIM and QMI. They will work with either pfSense/MBIM or Ubuntu/QMI.

      So both are supported differently depending on the OS.

      MC7750-QMI.jpg
      MC7750-QMI.jpg_thumb

      1 Reply Last reply Reply Quote 0
      • ?
        Guest
        last edited by

        So the procedure for modeswitching via AT commands goes like this example for the above module.

        Notice only 6,7,8 say supported. Well you can pick from any of these 3 modes.

        6)= DM(Managment Port)___ NEMA(GPS)___AT(AT Command Port)___QMI(Data Channel)
        7)=Same except data channels are RMNET1,2,3. In reality there are two data chanels and RMNET3 is ???UNK.
        8>=WIN8STD Net

        Now to switch simply issue AT!UDUSBCOMP=6 Or whatever mode you want.

        The RMNETS interfaces are for the Sierra Gobi API programming kit.

        I have no clue as to the -Win8STD Net-. But there is no "AT command" port there and no switching back unless MS has a tool.

        1 Reply Last reply Reply Quote 0
        • ?
          Guest
          last edited by

          Here are the details on the MC7700 in DIP mode.
          See we have a QMI mode there in #6 but "Not Supported"

          MC7700-DIP_USBCOMP.jpg_thumb
          MC7700-DIP_USBCOMP.jpg

          1 Reply Last reply Reply Quote 0
          • ?
            Guest
            last edited by

            Here is the same module switched to QMI with the Sierra Windows utility Modeswitcher. Looks like the PID changes from 68A3 to 68A2…

            MC7700-QMI_USBCOMP.jpg
            MC7700-QMI_USBCOMP.jpg_thumb

            1 Reply Last reply Reply Quote 0
            • B
              beeloo
              last edited by

              Alright.
              I cannot find any other serial port than the APU1D's mother board ports:

              [2.2.4-RELEASE][root@pfSense]/root: ls /dev/
acpi       ada0s1     bpf        cuau0.init devctl     gpioapu    label      null       pts        stdout     ttyu1.init ugen0.1    ugen5.1    xpt0
ad4        ada0s1a    bpf0       cuau0.lock devstat    io         md0        pass0      random     sysmouse   ttyu1.lock ugen1.1    ugen6.1    zero
ad4s1      ada0s1b    console    cuau1      dumpdev    kbd0       mdctl      pass1      sndstat    ttyu0      tun1       ugen1.2    ugen6.2
ad4s1a     apm        crypto     cuau1.init fd         kbdmux0    mem        pci        speaker    ttyu0.init tun2       ugen2.1    urandom
ad4s1b     apmctl     ctty       cuau1.lock fido       klog       midistat   pf         stderr     ttyu0.lock ufsid      ugen3.1    usb
ada0       audit      cuau0      da0        geom.ctl   kmem       nfslock    ptmx       stdin      ttyu1      ufssuspend ugen4.1    usbctl
[2.2.4-RELEASE][root@pfSense]/root::

              Do you have any idea on how to switch between configurations ?

              Thank you

              1 Reply Last reply Reply Quote 0
              • B
                beeloo
                last edited by

                We can change the device's configuration with:

                usbconfig -d 1.2 set_config 0

                or

                usbconfig -d 1.2 set_config 1

                I can see ue0 disappearing after switching to mode 1 (2 actually)

                No serial port are discovered in any mode.

                Maybe a serial port driver issue ?

                Any help will be much appreciated.

                1 Reply Last reply Reply Quote 0
                • ?
                  Guest
                  last edited by

                  After some more reading i see that usb-modeswitch does do more than -CD eject-. I think with a CDC interface you have gone as far as you can -without USB port recognition. You really need the USB interface to send  AT commands for APN and to connect.  CDC ethernet devices work with an AT channel. The Ericsson H5321 is such an example of working in pfSense with an CDC data interface. It uses the AT port to connect, CDC for data.

                  To get that -you would need your VID/PID in FreeBSD "USBDEVS" file and then device details in "U3G" file to be recognized . Even then I don't know what goes on with modem scripting(mpd5) It might require something there as well. Seeing how there are other Huawei on the list it might work. I see they uses CDC-NCM.

                  1 Reply Last reply Reply Quote 0
                  • ?
                    Guest
                    last edited by

                    So what are the two configurations you are switching? We know that one is an CDC Ethernet interface. What is the other? Does the module PID change with Configuration?

                    Is usb-modeswitch actually switching the VID/PID on the physical module or software aliasing it?? I dunno…

                    1 Reply Last reply Reply Quote 0
                    • ?
                      Guest
                      last edited by

                      If usb-modeswitch is just an software alias then consider switching the PID to a Huawei module on the support list like EM820 or similar. You need to watch this stuff because you can lock yourself out of the module(BRICK) if the stuff writes to hardware…

                      I am not familar with how usb-modeswitch works.

                      1 Reply Last reply Reply Quote 0
                      • B
                        beeloo
                        last edited by

                        I tried the following:

                        [2.2.4-RELEASE][root@pfSense]/root: usb_modeswitch -v 12d1 -p 1573 -V 12d1 -P 0x1506
Look for target devices ...
 No devices in target mode or class found
Look for default devices ...
   product ID matched
 Found devices in default mode (1)
Access device 002 on bus 001
Current configuration number is 1
Use interface number 0

USB description data (for identification)
-------------------------
Manufacturer: HUAWEI Technology
     Product: HUAWEI Mobile
  Serial No.: 0123456789ABCDEF
-------------------------
Warning: no switching method given. See documentation
-> Run lsusb to note any changes. Bye!

[2.2.4-RELEASE][root@pfSense/root:[/code]

The result is not as expected:
[code][2.2.4-RELEASE][root@pfSense]/root: usbconfig -u 1 -a 2 dump_device_desc
ugen1.2: <huawei mobile="" huawei="" technology=""> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)

  bLength = 0x0012 
  bDescriptorType = 0x0001 
  bcdUSB = 0x0200 
  bDeviceClass = 0x00fe 
  bDeviceSubClass = 0x0000 
  bDeviceProtocol = 0x0000 
  bMaxPacketSize0 = 0x0040 
  idVendor = 0x12d1 
  idProduct = 0x1573 
  bcdDevice = 0x0228 
  iManufacturer = 0x0002  <huawei technology="">
  iProduct = 0x0003  <huawei mobile="">
  iSerialNumber = 0x0004  <0123456789ABCDEF>
  bNumConfigurations = 0x0002 

[2.2.4-RELEASE][root@pfSense]/root:[/code]

Otherwise, I found this:
[url]http://technotation.com/2012/08/15/freebsd-and-mobile-broadband/[/url]

So, I'm trying to recompile a kernel with usbdevs and u3g.c updates. This takes a quite long time.</huawei></huawei></huawei>
                        1 Reply Last reply Reply Quote 0
                        • B
                          beeloo
                          last edited by

                          Got it: I now have 4 more serial ports in pfSense :)

                          Follow these steps for compiling pfSense 2.2.4's kernel:
                          https://forum.pfsense.org/index.php?topic=83062.msg454667#msg454667

                          Use these tips to create and activate the patch:
                          http://technotation.com/2012/09/08/pfsense-and-mobile-broadband/

                          Compile the kernel and install it into your pfSense.

                          You're in.

                          I will try to push my updates to pfsense-tools.

                          1 Reply Last reply Reply Quote 0
                          • ?
                            Guest
                            last edited by

                            I am working on an unsuported module as well. I am choosing to do my mods on FreeBSD usbdevs/u3g  first then maybe push them upstream. Compiling here as well! My laptop fan is a whirling loudly.. I wonder if the compiler is multithreaded on FreeBSD11(I upgraded tonight).

                            I thought i had "MODULES_OVERRIDE = u3g" set for compiling but it is still compiling everything.

                            I am using the same website instructions as you. They have been invaluable as I have no BSD background and sometimes struggle with Linux to BSD equivalents..

                            1 Reply Last reply Reply Quote 0
                            • B
                              beeloo
                              last edited by

                              Since the kernel embeds all the modules, you need to compile the whole kernel.

                              I'm encountering troubles…  :-\

                              I've set up a LTE interface like the one in the screenshot.

                              Unfortunately, ppp doesn't connect and I get the following logs:

                              Aug  3 18:54:14 shuttle ppp: Multi-link PPP daemon for FreeBSD
Aug  3 18:54:14 shuttle ppp:  
Aug  3 18:54:14 shuttle ppp: process 34901 started, version 5.7 (root@pfSense_RELENG_2_2_amd64_amd64-pfSense_RELENG_2_2-job-01 00:07  9-Jun-2015)
Aug  3 18:54:14 shuttle ppp: caught fatal signal TERM
Aug  3 18:54:14 shuttle ppp: [opt4] IFACE: Close event
Aug  3 18:54:14 shuttle ppp: [opt4] IPCP: Close event
Aug  3 18:54:14 shuttle ppp: [opt4] IPV6CP: Close event
Aug  3 18:54:14 shuttle ppp: waiting for process 76130 to die...
Aug  3 18:54:15 shuttle ppp: waiting for process 76130 to die...
Aug  3 18:54:16 shuttle ppp: [opt4] Bundle: Shutdown
Aug  3 18:54:16 shuttle ppp: waiting for process 76130 to die...
Aug  3 18:54:16 shuttle ppp: [opt4_link0] Link: Shutdown
Aug  3 18:54:16 shuttle ppp: process 76130 terminated
Aug  3 18:54:17 shuttle ppp: web: web is not running
Aug  3 18:54:17 shuttle ppp: [opt4] Bundle: Interface ng0 created
Aug  3 18:54:17 shuttle ppp: [opt4_link0] Link: OPEN event
Aug  3 18:54:17 shuttle ppp: [opt4_link0] LCP: Open event
Aug  3 18:54:17 shuttle ppp: [opt4_link0] LCP: state change Initial --> Starting
Aug  3 18:54:17 shuttle ppp: [opt4_link0] LCP: LayerStart
Aug  3 18:54:17 shuttle ppp: [opt4_link0] CHAT: +CGDCONT=1,"IP","mmsfree"
Aug  3 18:54:18 shuttle ppp: [opt4_link0] CHAT: Detected Hayes compatible modem.
Aug  3 18:54:18 shuttle ppp: [opt4_link0] CHAT: Dialing server at *99#...
Aug  3 18:54:18 shuttle ppp: [opt4_link0] CHAT: ATDT*99#
Aug  3 18:54:18 shuttle ppp: [opt4_link0] CHAT: Connected at 43200000.
Aug  3 18:54:18 shuttle ppp: [opt4_link0] MODEM: chat script succeeded
Aug  3 18:54:18 shuttle ppp: [opt4_link0] Link: UP event
Aug  3 18:54:18 shuttle ppp: [opt4_link0] LCP: Up event
Aug  3 18:54:18 shuttle ppp: [opt4_link0] LCP: state change Starting --> Req-Sent
Aug  3 18:54:18 shuttle ppp: [opt4_link0] LCP: SendConfigReq #1
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   ACFCOMP
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   PROTOCOMP
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   ACCMAP 0x000a0000
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   MRU 1500
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   MAGICNUM b72f1c2b
Aug  3 18:54:18 shuttle ppp: [opt4_link0] LCP: rec'd Configure Request #40 (Req-Sent)
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   ACCMAP 0x00000000
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   AUTHPROTO CHAP MD5
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   MAGICNUM 45de6366
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   PROTOCOMP
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   ACFCOMP
Aug  3 18:54:18 shuttle ppp: [opt4_link0] LCP: SendConfigAck #40
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   ACCMAP 0x00000000
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   AUTHPROTO CHAP MD5
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   MAGICNUM 45de6366
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   PROTOCOMP
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   ACFCOMP
Aug  3 18:54:18 shuttle ppp: [opt4_link0] LCP: state change Req-Sent --> Ack-Sent
Aug  3 18:54:18 shuttle ppp: [opt4_link0] LCP: rec'd Configure Ack #1 (Ack-Sent)
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   ACFCOMP
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   PROTOCOMP
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   ACCMAP 0x000a0000
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   MRU 1500
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   MAGICNUM b72f1c2b
Aug  3 18:54:18 shuttle ppp: [opt4_link0] LCP: state change Ack-Sent --> Opened
Aug  3 18:54:18 shuttle ppp: [opt4_link0] LCP: auth: peer wants CHAP, I want nothing
Aug  3 18:54:18 shuttle ppp: [opt4_link0] LCP: LayerUp
Aug  3 18:54:18 shuttle ppp: [opt4_link0] LCP: rec'd Discard Request #41 (Opened)
Aug  3 18:54:18 shuttle ppp: [opt4_link0] CHAP: rec'd CHALLENGE #1 len: 35
Aug  3 18:54:18 shuttle ppp: [opt4_link0]   Name: "UMTS_CHAP_SRVR"
Aug  3 18:54:18 shuttle ppp: [opt4_link0] CHAP: Using authname "user"
Aug  3 18:54:18 shuttle ppp: [opt4_link0] CHAP: sending RESPONSE #1 len: 25
Aug  3 18:54:18 shuttle ppp: [opt4_link0] CHAP: rec'd SUCCESS #1 len: 4
Aug  3 18:54:18 shuttle ppp: [opt4_link0] LCP: authorization successful
Aug  3 18:54:18 shuttle ppp: [opt4_link0] Link: Matched action 'bundle "opt4" ""'
Aug  3 18:54:18 shuttle ppp: [opt4_link0] Link: Join bundle "opt4"
Aug  3 18:54:18 shuttle ppp: [opt4] Bundle: Status update: up 1 link, total bandwidth 43200000 bps
Aug  3 18:54:18 shuttle ppp: [opt4] IPCP: Open event
Aug  3 18:54:18 shuttle ppp: [opt4] IPCP: state change Initial --> Starting
Aug  3 18:54:18 shuttle ppp: [opt4] IPCP: LayerStart
Aug  3 18:54:18 shuttle ppp: [opt4] IPV6CP: Open event
Aug  3 18:54:18 shuttle ppp: [opt4] IPV6CP: state change Initial --> Starting
Aug  3 18:54:18 shuttle ppp: [opt4] IPV6CP: LayerStart
Aug  3 18:54:18 shuttle ppp: [opt4] IPCP: Up event
Aug  3 18:54:18 shuttle ppp: [opt4] IPCP: state change Starting --> Req-Sent
Aug  3 18:54:18 shuttle ppp: [opt4] IPCP: SendConfigReq #1
Aug  3 18:54:18 shuttle ppp: [opt4]   IPADDR 0.0.0.0
Aug  3 18:54:18 shuttle ppp: [opt4]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug  3 18:54:18 shuttle ppp: [opt4] IPV6CP: Up event
Aug  3 18:54:18 shuttle ppp: [opt4] IPV6CP: state change Starting --> Req-Sent
Aug  3 18:54:18 shuttle ppp: [opt4] IPV6CP: SendConfigReq #1
Aug  3 18:54:20 shuttle ppp: [opt4] IPV6CP: SendConfigReq #2
Aug  3 18:54:20 shuttle ppp: [opt4] IPCP: SendConfigReq #2
Aug  3 18:54:20 shuttle ppp: [opt4]   IPADDR 0.0.0.0
Aug  3 18:54:20 shuttle ppp: [opt4]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug  3 18:54:22 shuttle ppp: [opt4] IPCP: SendConfigReq #3
Aug  3 18:54:22 shuttle ppp: [opt4]   IPADDR 0.0.0.0
Aug  3 18:54:22 shuttle ppp: [opt4]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug  3 18:54:22 shuttle ppp: [opt4] IPV6CP: SendConfigReq #3
Aug  3 18:54:24 shuttle ppp: [opt4] IPV6CP: SendConfigReq #4
Aug  3 18:54:24 shuttle ppp: [opt4] IPCP: SendConfigReq #4
Aug  3 18:54:24 shuttle ppp: [opt4]   IPADDR 0.0.0.0
Aug  3 18:54:24 shuttle ppp: [opt4]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug  3 18:54:26 shuttle ppp: [opt4] IPCP: SendConfigReq #5
Aug  3 18:54:26 shuttle ppp: [opt4]   IPADDR 0.0.0.0
Aug  3 18:54:26 shuttle ppp: [opt4]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug  3 18:54:26 shuttle ppp: [opt4] IPV6CP: SendConfigReq #5
Aug  3 18:54:28 shuttle ppp: [opt4] IPV6CP: SendConfigReq #6
Aug  3 18:54:28 shuttle ppp: [opt4] IPCP: SendConfigReq #6
Aug  3 18:54:28 shuttle ppp: [opt4]   IPADDR 0.0.0.0
Aug  3 18:54:28 shuttle ppp: [opt4]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug  3 18:54:30 shuttle ppp: [opt4] IPCP: SendConfigReq #7
Aug  3 18:54:30 shuttle ppp: [opt4]   IPADDR 0.0.0.0
Aug  3 18:54:30 shuttle ppp: [opt4]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug  3 18:54:30 shuttle ppp: [opt4] IPV6CP: SendConfigReq #7
Aug  3 18:54:32 shuttle ppp: [opt4] IPV6CP: SendConfigReq #8
Aug  3 18:54:32 shuttle ppp: [opt4] IPCP: SendConfigReq #8
Aug  3 18:54:32 shuttle ppp: [opt4]   IPADDR 0.0.0.0
Aug  3 18:54:32 shuttle ppp: [opt4]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug  3 18:54:34 shuttle ppp: [opt4] IPCP: SendConfigReq #9
Aug  3 18:54:34 shuttle ppp: [opt4]   IPADDR 0.0.0.0
Aug  3 18:54:34 shuttle ppp: [opt4]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug  3 18:54:34 shuttle ppp: [opt4] IPV6CP: SendConfigReq #9
Aug  3 18:54:36 shuttle ppp: [opt4] IPV6CP: SendConfigReq #10
Aug  3 18:54:36 shuttle ppp: [opt4] IPCP: SendConfigReq #10
Aug  3 18:54:36 shuttle ppp: [opt4]   IPADDR 0.0.0.0
Aug  3 18:54:36 shuttle ppp: [opt4]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug  3 18:54:38 shuttle ppp: [opt4_link0] LCP: no reply to 1 echo request(s)
Aug  3 18:54:38 shuttle ppp: [opt4] IPCP: parameter negotiation failed
Aug  3 18:54:38 shuttle ppp: [opt4] IPCP: state change Req-Sent --> Stopped
Aug  3 18:54:38 shuttle ppp: [opt4] IPCP: LayerFinish
Aug  3 18:54:38 shuttle ppp: [opt4] IPV6CP: parameter negotiation failed
Aug  3 18:54:38 shuttle ppp: [opt4] IPV6CP: state change Req-Sent --> Stopped
Aug  3 18:54:38 shuttle ppp: [opt4] IPV6CP: LayerFinish
Aug  3 18:54:38 shuttle ppp: [opt4] Bundle: No NCPs left. Closing links...
Aug  3 18:54:38 shuttle ppp: [opt4] Bundle: closing link "opt4_link0"...
Aug  3 18:54:38 shuttle ppp: [opt4_link0] Link: CLOSE event
Aug  3 18:54:38 shuttle ppp: [opt4_link0] LCP: Close event
Aug  3 18:54:38 shuttle ppp: [opt4_link0] LCP: state change Opened --> Closing
Aug  3 18:54:38 shuttle ppp: [opt4_link0] Link: Leave bundle "opt4"
Aug  3 18:54:38 shuttle ppp: [opt4] Bundle: Status update: up 0 links, total bandwidth 9600 bps
Aug  3 18:54:38 shuttle ppp: [opt4] IPCP: Close event
Aug  3 18:54:38 shuttle ppp: [opt4] IPCP: state change Stopped --> Closed
Aug  3 18:54:38 shuttle ppp: [opt4] IPV6CP: Close event
Aug  3 18:54:38 shuttle ppp: [opt4] IPV6CP: state change Stopped --> Closed
Aug  3 18:54:38 shuttle ppp: [opt4] IPCP: Down event
Aug  3 18:54:38 shuttle ppp: [opt4] IPCP: state change Closed --> Initial
Aug  3 18:54:38 shuttle ppp: [opt4] IPV6CP: Down event
Aug  3 18:54:38 shuttle ppp: [opt4] IPV6CP: state change Closed --> Initial
Aug  3 18:54:38 shuttle ppp: [opt4_link0] LCP: SendTerminateReq #2
Aug  3 18:54:38 shuttle ppp: [opt4_link0] LCP: LayerDown
Aug  3 18:54:40 shuttle ppp: [opt4_link0] LCP: SendTerminateReq #3
Aug  3 18:54:42 shuttle ppp: [opt4_link0] LCP: state change Closing --> Closed
Aug  3 18:54:42 shuttle ppp: [opt4_link0] LCP: LayerFinish
Aug  3 18:54:42 shuttle ppp: [opt4_link0] Link: DOWN event
Aug  3 18:54:42 shuttle ppp: [opt4_link0] LCP: Down event
Aug  3 18:54:42 shuttle ppp: [opt4_link0] LCP: state change Closed --> Initial

                              I also tried with /dev/cuaU0.1, /dev/cuaU0.2, /dev/cuaU0.3…

                              ![Screen Shot 2015-08-03 at 18.50.38.png](/public/imported_attachments/1/Screen Shot 2015-08-03 at 18.50.38.png)
                              ![Screen Shot 2015-08-03 at 18.50.38.png_thumb](/public/imported_attachments/1/Screen Shot 2015-08-03 at 18.50.38.png_thumb)

                              1 Reply Last reply Reply Quote 0
                              • B
                                beeloo
                                last edited by

                                Alright, everything is working as expected.

                                /dev/cuaU0.2 is the one to talk with.

                                Don't forget to put your module in the correct connector (J16) of your APU1 to be able to use the SIM card slot.
                                See http://www.pcengines.ch/pdf/apu1.pdf for more details.

                                Finally, I pushed my patch to FreeBSD 10.1.
                                It should be available in the next pfSense release.

                                Have fun !

                                1 Reply Last reply Reply Quote 0
                                • ?
                                  Guest
                                  last edited by

                                  Since the kernel embeds all the modules, you need to compile the whole kernel.

                                  Is this with just pfSense or all FreeBSD?

                                  In Freebsd, I tried compiling just u3g with its makefile and then copied my modified module u3g.ko over to /boot/kernel/modules folder. Did not seem to work so i assume i need to compile the whole thing with make buildkernel and make installkernel run from /usr/src folder. My modified u3g was smaller in size by 10Kb. I see a u3g.ko.symbols as well and am cluesless.

                                  Can i just recompile u3g or do I need to do it all? usbdevs file does not need compiling or does it?? Seems like a text file.

                                  I really don't want old kernel/backup and just want to fixup current one. Am i doing this right?

                                  Can I recompile a kernel that i am currently booted to and if not then is that why the man has you work on the MYKERNEL?

                                  I am using this but without a config file:
                                  https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html
                                  I just want to rebuild Freebsd current kernel, is that doable or wrong way to do it. If it don't work i will just wipe it.

                                  1 Reply Last reply Reply Quote 0
                                  • ?
                                    Guest
                                    last edited by

                                    In Freebsd, I tried compiling just u3g with its makefile and then copied my modified module u3g.ko over to /boot/kernel/modules folder.

                                    Perhaps, it would be not running because the driver was for another version of FreeBSD, can this be? (8.3 / 10.1)

                                    1 Reply Last reply Reply Quote 0
                                    • B
                                      beeloo
                                      last edited by

                                      Since the original kernel is compiled with the u3g module embedded, you have to compile a new kernel.

                                      1 Reply Last reply Reply Quote 0
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        Great result, nice job!  :)

                                        Steve

                                        1 Reply Last reply Reply Quote 0
                                        • ?
                                          Guest
                                          last edited by

                                          I would like to test the Huawei ME909u-523 as that is for North America market. It seems to be rather rare. The bands on the EU version are not the same. The 523 supports LTE on B2, B4, B17 for ATT and Tmobile here.

                                          I wonder if the PID is the same as your module…

                                          1 Reply Last reply Reply Quote 0
                                          • B
                                            beeloo
                                            last edited by

                                            Can you please open a new thread for this module ?

                                            Then I will try answer to help

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.