APU1D with LTE Huawei ME909u-521
-
i have filled in the init string and have preformed a reboot.
but nothing happens…
-
Did you insert the SIM card ?
Are you using an APU1D ? Did you put the module into the correct PCIe slot ? -
Yes simcard is inserd without PIN
Board is Apu 1D4
Modem is insert in Slot J16 -
I don't have the module anymore so it will be difficult for me to solve your issue as is :-[
-
beelloo,
maby we can do a remote session?
-
It's quite difficult to take enough time to solve the issue.
However, I don't understand why ppp is trying to restore the modem's default settings:
Sep 16 19:40:52 ppp: [opt3_link0] CHAT: The modem responded with "ERROR" to the command "AT&F&C1&D2E0S0=0M1" at ModemCmd: label.Maybe you can avoid it to and maybe it will be running.
-
By the way, here is the latest advanced AT commands documentation:
http://consumer.huawei.com/en/solutions/m2m-solutions/products/support/user-guides/detail/me909u-521-en.htm?id=29741 -
hmm i will try to reinstall everything. maybe somethin went wrong
-
Seeing how you compiled it in, why not use terminal and probe your ports..
cu -l /dev/cuaU0.2Note text at top of screen if any.(If text says Connected then may be wrong command port)
then: AT
then:ATZAt this point you should see a return of AT on-screen from your port.
At this point use the AT document provided by beeloo and start digging.
Are you using pfSense or FreeBSD to test?
-
i am using pfsense 2.2.5 my own build based on releng 2.2
-
I was running pfSense 2.2.4 running a 10.1 custom kernel based on RELENG_2_2
-
its the same … but my version is now called 2.2.5 but its based on 10.1 and pf releng 2.2
-
hmm i think the Problem is in this string:
ppp: [opt3_link0] CHAT: +CGDCONT=1,"IP","web.vodafone.de"
IP means that it is an IP Connection, i think it must be PPP.
In the commandline i can set it so ppp but pf sets it back via this string.
-
Mine was:
ppp: [opt4_link0] CHAT: +CGDCONT=1,"IP","free" ppp: [opt4_link0] CHAT: Detected Hayes compatible modem. ppp: [opt4_link0] CHAT: Dialing server at *99#... ppp: [opt4_link0] CHAT: ATDT*99# ppp: [opt4_link0] CHAT: Connected at 43200000. ppp: [opt4_link0] MODEM: chat script succeeded ppp: [opt4_link0] Link: UP event -
hmm know i am a little bit confused :o
than i do not understand where the problem is.
The Modem is online, has LTE connection, i can send SMS via console, can call via console and pick up via console.So it seems to work. But not with PFSense
-
There is something I'm not sure.
You said you are running pfSense 2.2.5…
What I did is only installing the patched FreeBSD 10.1 kernel onto the 2.2.4.And you have a step I do not have:
Sep 16 19:40:52 ppp: [opt3_link0] CHAT: The modem responded with "ERROR" to the command "AT&F&C1&D2E0S0=0M1" at ModemCmd: label.?
-
are you shure that tis modem uses a ppp connection? it seems that it makes his own ip network ?!
-
Yes of course
-
pfSense 2.2.5 should support the module natively since FreeBSD approved my patch earlier…
-
not realy….
i have update my APU to 2.2.5 but i cant´t see the serial ports ;-(