APU1D with LTE Huawei ME909u-521

beeloo

I don't have the module anymore so it will be difficult for me to solve your issue as is :-[

SimonBu

beelloo,

maby we can do a remote session?

beeloo

It's quite difficult to take enough time to solve the issue.

However, I don't understand why ppp is trying to restore the modem's default settings:

Sep 16 19:40:52    ppp: [opt3_link0] CHAT: The modem responded with "ERROR" to the command "AT&F&C1&D2E0S0=0M1" at ModemCmd: label.

Maybe you can avoid it to and maybe it will be running.

beeloo

By the way, here is the latest advanced AT commands documentation:
http://consumer.huawei.com/en/solutions/m2m-solutions/products/support/user-guides/detail/me909u-521-en.htm?id=29741

SimonBu

hmm i will try to reinstall everything. maybe somethin went wrong

Seeing how you compiled it in, why not use terminal and probe your ports..
cu -l /dev/cuaU0.2

Note text at top of screen if any.(If text says Connected then may be wrong command port)

then: AT
then:ATZ

At this point you should see a return of AT on-screen from your port.

At this point use the AT document provided by beeloo and start digging.

Are you using pfSense or FreeBSD to test?

SimonBu

i am using pfsense 2.2.5 my own build based on releng 2.2

beeloo

I was running pfSense 2.2.4 running a 10.1 custom kernel based on RELENG_2_2

SimonBu

its the same … but my version is now called 2.2.5 but its based on 10.1 and pf releng 2.2

SimonBu

hmm i think the Problem is in this string:

ppp: [opt3_link0] CHAT: +CGDCONT=1,"IP","web.vodafone.de"

IP means that it is an IP Connection, i think it must be PPP.

In the commandline i can set it so ppp but pf sets it back via this string.

beeloo

Mine was:

ppp: [opt4_link0] CHAT: +CGDCONT=1,"IP","free"
ppp: [opt4_link0] CHAT: Detected Hayes compatible modem.
ppp: [opt4_link0] CHAT: Dialing server at *99#...
ppp: [opt4_link0] CHAT: ATDT*99#
ppp: [opt4_link0] CHAT: Connected at 43200000.
ppp: [opt4_link0] MODEM: chat script succeeded
ppp: [opt4_link0] Link: UP event

SimonBu

hmm know i am a little bit confused :o

than i do not understand where the problem is.
The Modem is online, has LTE connection, i can send SMS via console, can call via console and pick up via console.

So it seems to work. But not with PFSense

beeloo

There is something I'm not sure.

You said you are running pfSense 2.2.5…
What I did is only installing the patched FreeBSD 10.1 kernel onto the 2.2.4.

And you have a step I do not have:

Sep 16 19:40:52    ppp: [opt3_link0] CHAT: The modem responded with "ERROR" to the command "AT&F&C1&D2E0S0=0M1" at ModemCmd: label.

?

SimonBu

are you shure that tis modem uses a ppp connection? it seems that it makes his own ip network ?!

beeloo

Yes of course

beeloo

pfSense 2.2.5 should support the module natively since FreeBSD approved my patch earlier…

SimonBu

not realy….

i have update my APU to 2.2.5 but i cant´t see the serial ports ;-(

AndrewZ

@SimonBu:

i cant´t see the serial ports ;-(

what you can see about the modem in the log?

SimonBu

the Log shows nothing in offical 2.2.5

it´s very strange on beeloos side it works and on my side it don´t will work.

Therefore i had my one compiled version with the changes discribed in this Thread. Then i can see the Moden in the PPP Tab but i can´t establish a connection to the Internet.

I don't see the modem in u3g from FreeBSD11 -Current from August26th.

This would mean it probably did not make it into FreeBSD 10.2 and hence pfSense 2.25 is based off that.

Do you see the PID in your u3g?