Choosing hardware based on throughput performance
-
A1SAi-2758F + sc101i case must be the choice.
The only concern is now if i can add an extra network adaptor on pci-e. -
A1SRi-2758F has 4x gbit interface. you need more ?
-
Ideally 2 more for a nas lagg :P
-
A1SAi-2758F + sc101i case must be the choice.
I personally was also thinking exactly at first likes you!
You have 4 common, mainly or mostly used case free to choose from for that board.
1U Rackmount- 1U SC505-203 with Front I/O (Ports)
- 1U SC504-203 with Rear I/O Ports
Mini-ITX - Mini-ITX SC101i with Front Ports
- SC721TQ-250B Mini-ITX Tower (But with 1 PCIe Slot outbreak)
- The M350 Mini-ITX also without an PCIe Slot outbreak
The only concern is now if i can add an extra network adaptor on pci-e.
This might be not really able with the mini ITX form factor for the case.
But if you perhaps swap over to a 1U chassis or case, there are more way to help you out.
I don´t know from where you are nikkon and what are the price for this hardware will be
that you have to pay for it but Supermicro offers also other boards in other form factors.
So let us imagine you would tend to a 1U form factor then you could go with this one.
A1SRM-LN7F-2758
C2758
8 Cores- 1 Intel IPMI LAN Port
- 7 Intel GB LAN Ports
AES-NI & QuickAssist
8 GB LAN Ports direct on the mainboard no other cards are needed
mSATA Slot (half high) direct on the mainboard no expensive SSD is needed
Normal DDR3 RAM modules can be used and not the more expensive SO-DIMMs
If you need more GB LAN ports or perhaps different Ports for your appliance you
might be happy with this appliances from Axiomtek, they will be not cheap but comes
with some interesting features on top and also more Ports as usual.
Axiomtek NA361 C2358 Dual Core
Axiomtek NA361R C2558 Quad Core or C2758 8 Core
In the middle of the NA361R are a module bay to insert modules for the NA361R.
- VPN Modul
- 4 SFP+
- 4 RJ45 PoE
- 8 RJ45
- 8 SFP -
i deviced to get supermicro case SC101i and another ethernet adaptor for wan only: INTEL Gigabit CT or http://www.supermicro.nl/products/accessories/addon/AOC-CGP-i2.cfm
hope to be enought space in the case for it.
any other ideas? pci-express 8x ? -
or http://www.supermicro.nl/products/accessories/addon/AOC-CGP-i2.cfm
Is this then for the PCIe Slot on the A1SRi-2758F? Is this compatible together?
-
I belive they are. Still need to confirm with super micro dealer.
-
Why don't you get a secondhand pair of Chelsio 310s or Mellanox connectx-2 cards and whack one in the pfsense box?
Or just get a Chelsio t420 for pfsense ($75-80USD on eBay) and Mellanox (Connectx-2 - $19USD) for your server.
10gig is much easier than lagg.
-
I have 2 concerns here :
-how's gonna sell this in romania- if will feat in the case
-
I have 2 concerns here :
-how's gonna sell this in romania- if will feat in the case
- EBay sellers will ship to Romania.
- With a low profile bracket, and some dremelling, you'll get a chelsio t420 in that case, it's a very small card. (100mm. x 69mm), you won't find much smaller that isn't specific (like the card mentioned above). The 4xPci-e slot will be able to keep up with the two 10gbe ports.
-
…
Got this task to choose a box for a fast wan connection (1000 Mbps fiber).
...
Forgot to tell you : wan will be over PPPoE
...Careful with Rangely and this set of conditions. According to here: https://forum.pfsense.org/index.php?topic=100900.0
PPOE connections are currently limited to a single core for some of the related CPU load. On the Rangely SoC, this then limits throughput to less than 1 Gigabit. According to the link and the linke thread(s), you'd need a faster CPU (i.e. more single core performance) to be able to use the full Gigabit.
-
…
Got this task to choose a box for a fast wan connection (1000 Mbps fiber).
...
Forgot to tell you : wan will be over PPPoE
...Careful with Rangely and this set of conditions. According to here: https://forum.pfsense.org/index.php?topic=100900.0
PPOE connections are currently limited to a single core for some of the related CPU load. On the Rangely SoC, this then limits throughput to less than 1 Gigabit. According to the link and the linke thread(s), you'd need a faster CPU (i.e. more single core performance) to be able to use the full Gigabit.
If he gets a real or pure fiber modem (not a router) he could set up the data inside if the modem and then he
gets a better or a faster throughput. So this problem can be pushed away or solved out, for sure not in all cases
but many where the ISP is using for that pure modems or the router is able to be setup in the so called "bridged mode". -
Ideally 2 more for a nas lagg :P
http://www.supermicro.com/products/motherboard/Atom/X10/A1SRM-LN7F-2758.cfm
-
anyone has any clue how many pps can handle this kinda of setup? the one i asked for (c2758 based)
I was just reading some reviews for Vyos and miktorik and they look impresive. -
I was just reading some reviews for Vyos and miktorik
Ok for sure this might be a total other thing to go with different OS!
If this both named OS are doing the usage of multicore instead of the single Core usage
by going to use pppoe, this would be really able to see an impressive goal or number of pps. -
I know Pfsense uses only 1 core for PPPoE…. For now I hope.
Waiting for a testfix in the near future. -
I'm in the same boat.
I need a rig that can run 1gigabit fiber without choking. I currently have an AMD G-T40E and it tops out at about 350mbps.
Pricing out the Supermicro with memory and a case and an SSD comes to something like $500 US. Am I the only one who thinks that's a lot of money for a router?
Is there no cheaper way to do it and still take advantage of 1gigabit WAN?
I also run 3 IPSEC VPN tunnels…
-
I'm in the same boat.
Likes many peoples
I need a rig that can run 1gigabit fiber without choking.
There are so many out of them that we can´t really count and name them here all, but for sure a
bunch of should be placed for you here.I currently have an AMD G-T40E and it tops out at about 350mbps.
Hmm, just curious we got something around till ~550 MBit/s and ~650 MBit/s - ~750 MBit/s
with enabled PowerD (Hi adaptive. Sometimes and surely pending on the configuration it might
be good to set up a higher mbuf size. (measured with iPerf from PC (on the WAN Port) to PC (on the LAN Port)Pricing out the Supermicro with memory and a case and an SSD comes to something
like $500 US. Am I the only one who thinks that's a lot of money for a router?Not really alone, but if you need only a capable routing device you might be better going
with a dedicated router software likes OpenWRT or DD-WRT, pfSense is a fully featured
software firewall that can be turned with ease to a full UTM device!!! It depends on what
services you might be offering to your network and how many packets you will be installing
and on top how many functions and options given by pfSense will be turned on.I also run 3 IPSEC VPN tunnels…
This is to less input I think.
Offered services, activated functions, turned on options, used features, installed packets, number of
rules, DMZ & LAN devices and switches, users, CP, Proxy, DPI, IDS/IPS and other things on top likes
needed throughput on WAN, VPN and LAN or DMZ would be fine to know.Is there no cheaper way to do it and still take advantage of 1gigabit WAN?
For sure it is and there is a really great amount of devices that could match your wish for sure!
At first I want to tell you that the pfSense store is combining the best out of from both "worlds"
the PC Engines APU boards 3 miniPCIe slots + 1 SIM slot and the Intel Atom C2x58 SoC mostly
to find on the well known Supermicro boards. So the SG-2220 for $299 would be matching also
fine to the small told case of usage.Budget suggestion 1:
pfSense SG-2220 & miniPCIe WIFi card & M.2 mSATA drive
pfSense shop ready to go and with pre-installed pfSense
~$299 + add on cards if neededBudget suggestion 2:
Intel Celeron G3260 @3,2GHz Mini-ITX Board
Is capable to route 1 GBit/s at the WAN port and running snort for sure.- self made box ~$200 - $300
Most common suggestion:
Intel Celeron J1900 Quad Core CPU based boards often are able to turn the pfSense
both into a real UTM with ease for ~$299 to ~$320 fully assembled and ready to go.- Jetway board based
- Axiomtek
$299 - $599
alternatively
Intel Bay Trail Dual Core CPU @2,16 GHz with AES-NI
Will be right sorted for a home appliance but very powerful- Axiomtek
- Jetway boards based
$299 - $599
alternatively
Intel Atom C2358, C2558 or C2758 from Dual Core @1,7GHz to Octa Core @2,4GHz
with AES-NI and Intel QuickAssist
pfSense shop as SG units ~$300 - $600
Supermicro Boards from resellers or amazon ~$500
Axiomtek appliances from resellers or directly from Axiomtek ~$600Really powerful appliances:
Intel Atom C2758, Intel Xeon D-1540, Intel Xeon E3 or E5 based with AES-NI
partial with Intel QuickAssist support.- Lanner appliances ~$400 - open end
- Lannic appliances ~$400 - open end
- Axiomtek appliances ~$800 open end
Axiomtek NA342 (J1900)
Axiomtek NA342R (J1900)
Axiomtek NA361 (C2558 or C2758)
Axiomtek NA361R (C2558 or C2758) -
I have great expectations from the version 2.2.5 in terms of performance improvement and bigger from 3.x :)
C2758 + 8Gb RAM + SSD + PCI-X 4x intel Gigabit for WAN must be capable to route 1 GBit/s . -
Wow, that was an EXTREMELY comprehensive reply.
Thank you!
I do make use of a lot of pfSense's features, so I don't want to lose pfSense. I do IGMP proxy, VPN, lots of port mapping, I like debugging tools, etc…
From your list of suggestions, it looks like $500 is the sweet spot for a decent pfSense machine, so I guess I have to go with that.
Which SG unit from pfSense shop would be equivalent to the C2758 SuperMicro board which I will likely go with at the end of all this. :)
Thanks so much for the reply!
Rob
