DHCP stopped after adding a second LAN interface
-
Multiple interfaces match the same subnet: xl0 pcn0 Interface pcn0 matches multiple shared networks
What are your interface addresses?
Post your actual interface and DHCP server configs screens. -
Here is the information. If you need something else let me know.
THANK YOU!
-
If the interface IP address is on LAN2 is .225, change your pool starting address to .226, enable DHCP on LAN2 and see what happens.
-
I made the change and the result is the same.
-
Post the actual interface configuration pages.
-
I am new to pfsense so please guide me to the pages that you need
-
so these public networks are actually routed to you? What is the network on your wan?
I show this falling under 46.214.68.0/22 Bistrita-Nasaud on AS48161
You just click the interface name to call up its actual settings.
-
here is the routing…. it is working fine... i am using it. it is just that when i activate the dhcp service on both the lan interfaces.... the service is stopped. when i deactivate 1 of them ... the service is back up
-
OMFG POST BOTH LAN INTERFACES.
-
here is the second lan
-
that is not routing that is your lan interface.. What is the other interface, and what is the network you have on your wan. Please post all 3 of them like you just did for lan
edit: well those clearly do not overlap.. So what is your wan??
-
here is the wan conf page … the ip for it is 94.52.142.198
-
here is also the dashboard