DHCP stopped after adding a second LAN interface

[maistrucfp]

Here is the information. If you need something else let me know.
THANK YOU!

[Derelict]

If the interface IP address is on LAN2 is .225, change your pool starting address to .226, enable DHCP on LAN2 and see what happens.

[maistrucfp]

I made the change and the result is the same.

[Derelict]

Post the actual interface configuration pages.

[maistrucfp]

I am new to pfsense so please guide me to the pages that you need

[johnpoz]

so these public networks are actually routed to you?  What is the network on your wan?

I show this falling under 46.214.68.0/22 Bistrita-Nasaud on AS48161

You just click the interface name to call up its actual settings.

[maistrucfp]

here is the routing…. it is working fine... i am using it. it is just that when i activate the dhcp service on both the lan interfaces.... the service is stopped. when i deactivate 1 of them ... the service is back up

[Derelict]

OMFG POST BOTH LAN INTERFACES.

[maistrucfp]

here is the second lan

[johnpoz]

that is not routing that is your lan interface.. What is the other interface, and what is the network you have on your wan.  Please post all 3 of them like you just did for lan

edit: well those clearly do not overlap.. So what is your wan??

[maistrucfp]

here is the wan conf page … the ip for it is 94.52.142.198

[maistrucfp]

here is also the dashboard