Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Huawei k5160 4g usb mobile broadband

    Scheduled Pinned Locked Moved Hardware
    53 Posts 6 Posters 16.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • R
      rajbps
      last edited by

      Hi Everyone,

      I am trying to setup a backup connection using a huawei k5160 4g mobile broadband usb doungle and i am getting some issues.

      I set up an PPP interface :

      /dev/cuau0 to /dev/cuau5

      selectec /dev/cuau0

      and added the country and so on.

      In the logs of PPP i keep getting :

      ppp: process 40749 started, version 5.7 (root@pfSense_RELENG_2_2_amd64_amd64-pfSense_RELENG_2_2-job-03 20:05 21-Aug-2015)
      ppp: web: web is not running
      ppp: [opt3] Bundle: Interface ng1 created
      ppp: [opt3_link0] Link: OPEN event
      ppp: [opt3_link0] LCP: Open event
      ppp: [opt3_link0] LCP: state change Initial –> Starting
      ppp: [opt3_link0] LCP: LayerStart
      ppp: [opt3_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
      ppp: [opt3_link0] MODEM: chat script failed
      ppp: Multi-link PPP daemon for FreeBSD

      The interface is up but no ip address:

      Status up
      PPP
      up
      Uptime 00:00:0
      MAC address 00:00:00:00:00:00
      IPv6 Link Local fe80::2e8:4cff:fe68:2248 
      MTU 1500
      In/out packets 0/5 (0 bytes/476 bytes)
      In/out packets (pass) 0/5 (0 bytes/476 bytes)
      In/out packets (block) 0/0 (0 bytes/0 bytes)
      In/out errors 0/0
      Collisions 0

      Here is the  mpd_opt3.conf

      startup:

      configure the console

      set console close

      configure the web server

      set web close

      default:
      pppclient:
      create bundle static opt3
      set bundle enable ipv6cp
      set iface name ppp1
      set iface disable on-demand
      set iface idle 0
      set iface enable tcpmssfix
      set iface up-script /usr/local/sbin/ppp-linkup
      set iface down-script /usr/local/sbin/ppp-linkdown
      set ipcp ranges 0.0.0.0/0 10.64.64.1/0
      set ipcp enable req-pri-dns
      set ipcp enable req-sec-dns
      #log -bund -ccp -chat -iface -ipcp -lcp -link

      create link static opt3_link0 modem
      set link action bundle opt3
      set link disable multilink
      set link keep-alive 10 60
      set link max-redial 0
      set link disable chap pap
      set link accept chap pap eap
      set link disable incoming
      set link mtu 1492
      set auth authname "web"
      set auth password web
      set modem device /dev/cuau0
      set modem script DialPeer
      set modem idle-script Ringback
      set modem watch -cd
      set modem var $DialPrefix "DT"
      set modem var $Telephone "*99#"
      set modem var $APN "internet"
      set modem var $APNum "1"
      open

      I am running :

      2.2.6-RELEASE (amd64)
      built on Mon Dec 21 14:50:08 CST 2015
      FreeBSD 10.1-RELEASE-p25

      Can anyone help please

      Regards,

      Raj

      1 Reply Last reply Reply Quote 0
      • R
        rajbps
        last edited by

        anyone any ideas please

        1 Reply Last reply Reply Quote 0
        • R
          rajbps
          last edited by

          Hi Team,

          I got a different modem this time a Huawei E5372 which is on the list of supported devices but still can not get it to work.

          This is what I have in the logs:

          usbus0: 5.0Gbps Super Speed USB v3.0
          usbus1: 480Mbps High Speed USB v2.0
          usbus2: 480Mbps High Speed USB v2.0
          ugen1.1: <intel>at usbus1
          uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1
          ugen0.1: <0x8086> at usbus0
          uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
          ugen2.1: <intel>at usbus2
          uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
          uhub1: 8 ports with 8 removable, self powered
          uhub0: 2 ports with 2 removable, self powered
          uhub2: 2 ports with 2 removable, self powered
          ugen1.2: <vendor 0x8087="">at usbus1
          uhub3: <vendor 2="" 9="" 0x8087="" product="" 0x0024,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus1
          ugen2.2: <vendor 0x8087="">at usbus2
          uhub4: <vendor 2="" 9="" 0x8087="" product="" 0x0024,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus2
          ugen0.2: <vodafone group="" huawei="">at usbus0
          umass0: <vodafone 0="" 1="" group="" huawei="" vodafone="" mobile="" broadband="" huawei,="" class="" 0,="" rev="" 2.00="" 1.02,="" addr="">on usbus0
          umass1: <vodafone 0="" 1="" group="" huawei="" vodafone="" mobile="" broadband="" huawei,="" class="" 0,="" rev="" 2.00="" 1.02,="" addr="">on usbus0
          uhub3: 6 ports with 6 removable, self powered
          uhub4: 8 ports with 8 removable, self powered
          ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
          cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0
          cd0: <vodafone cd="" rom="" (huawei)="" 2.31="">Removable CD-ROM SCSI-2 device
          cd0: 40.000MB/s transfers
          cd0: cd present [65536 x 2048 byte records]
          cd0: quirks=0x10<10_BYTE_ONLY>
          ada0: <axns381e-64gm-b 2.9f="">ATA-9 SATA 3.x device
          ada0: Serial Number 2D5120007334
          ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
          ada0: Command Queueing enabled
          ada0: 61057MB (125045424 512 byte sectors: 16H 63S/T 16383C)
          ada0: Previously was known as ad4
          ses0 at ahciem0 bus 0 scbus1 target 0 lun 0
          ses0: <ahci sgpio="" enclosure="" 1.00="" 0001="">SEMB S-E-S 2.00 device
          ses0: SEMB SES Device
          SMP: AP CPU #1 Launched!
          Timecounter "TSC" frequency 1795955188 Hz quality 1000
          da0 at umass-sim1 bus 1 scbus3 target 0 lun 0
          da0: <vodafone sd="" storage="" 2.31="">Removable Direct Access SCSI-2 device
          da0: 40.000MB/s transfers
          da0: Attempt to query device size failed: ILLEGAL REQUEST, Invalid field in CDB
          da0: quirks=0x2 <no_6_byte>(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 ff ff 00 00 01 00
          (cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
          (cd0:umass-sim0:0:0:0): SCSI status: Check Condition
          (cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
          (cd0:umass-sim0:0:0:0): Info: 0xffff
          (cd0:umass-sim0:0:0:0): Error 5, Unretryable error
          (cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
          (cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 ff ff 00 00 01 00
          (cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
          (cd0:umass-sim0:0:0:0): SCSI status: Check Condition
          (cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
          (cd0:umass-sim0:0:0:0): Info: 0xffff
          (cd0:umass-sim0:0:0:0): Error 5, Unretryable error
          (cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
          (cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 ff fe 00 00 01 00
          (cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
          (cd0:umass-sim0:0:0:0): SCSI status: Check Condition
          (cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
          (cd0:umass-sim0:0:0:0): Info: 0xfffe
          (cd0:umass-sim0:0:0:0): Error 5, Unretryable error
          (cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
          (cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 ff c1 00 00 04 00
          (cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error

          Can anyone please help.

          I am willing to send some beer money £50.00 via paypal to the person able to get this sorted.

          Regards,

          Raj</no_6_byte></vodafone></ahci></axns381e-64gm-b></vodafone></vodafone></vodafone></vodafone></vendor></vendor></vendor></vendor></intel></intel></intel></intel>

          1 Reply Last reply Reply Quote 0
          • R
            rajbps
            last edited by

            Here is a usbconfig

            ugen1.1: <ehci root="" hub="" intel="">at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=S                                                                                                AVE (0mA)
            ugen0.1: <xhci root="" hub="" 0x8086="">at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr                                                                                                =SAVE (0mA)
            ugen2.1: <ehci root="" hub="" intel="">at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=S                                                                                                AVE (0mA)
            ugen1.2: <product 0x0024="" vendor="" 0x8087="">at usbus1, cfg=0 md=HOST spd=HIGH (480Mb                                                                                                ps) pwr=SAVE (0mA)
            ugen2.2: <product 0x0024="" vendor="" 0x8087="">at usbus2, cfg=0 md=HOST spd=HIGH (480Mb                                                                                                ps) pwr=SAVE (0mA)
            ugen0.2: <vodafone mobile="" broadband="" huawei="" vodafone="" group="">at usbus0, cfg

            usbconfig -d ugen0.2 dump_device_desc

            ugen0.2: <vodafone mobile="" broadband="" huawei="" vodafone="" group="">at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)

            bLength = 0x0012
              bDescriptorType = 0x0001
              bcdUSB = 0x0200
              bDeviceClass = 0x0000
              bDeviceSubClass = 0x0000
              bDeviceProtocol = 0x0000
              bMaxPacketSize0 = 0x0040
              idVendor = 0x12d1
              idProduct = 0x1582
              bcdDevice = 0x0102
              iManufacturer = 0x0002  <vodafone group="" (huawei)="">iProduct = 0x0001  <vodafone mobile="" broadband="" (huawei)="">iSerialNumber = 0x0000  <no string="">bNumConfigurations = 0x0001

            and the modem is a Vodafone R215 4G Mobile Broadband WiFi WLAN which is a Huawei E5372

            Hope this helps

            Regards,

            Raj</no></vodafone></vodafone></vodafone></vodafone></product></product></ehci></xhci></ehci>

            1 Reply Last reply Reply Quote 0
            • A
              AndrewZ
              last edited by

              I will reply to the issue with E5372 here and will probably move this later to a separate topic dedicated to Huawei modems.

              In short - the main issue is with "idProduct = 0x1582". This modem does not have a "4G MODEM" in it's composition (check with AT^SETPORT=?), so the only option is to use it as a network card (NCM), but it seems that pfSense will not detect "cdce0" on the modem with unknown PID.

              But first I will post a WARNING:
              At some point a new interface ue0 will be created. If for some reasons the router will reboot while the modem is off or disconnected you will be trapped with the following message during boot:

              Warning: Configuration references interfaces that do not exist: ue0
              Network interface mismatch – Running interface assignment option.

              Have your console ready!

              Now the process:
              1. Flash the modem with the generic software like 21.290.21.00.00 (this is what I use)
              I cannot tell this is a mandatory, but most likely this is very important. Check the corresponding forums before flashing your modem if you don't need a brick :)
              You may need a flash code which is generated from IMEI.

              2. make sure the modem has the right composition, you should have a proper one after flashing. Checking from any terminal:

              Send:AT^SETPORT?

Recieve: ^SETPORT:A1,A2;12,16,A1,A2
Recieve: OK

              Setting the values if necessary:

              Send:AT^SETPORT="A1,A2;12,16,A1,A2"
Recieve: OK

              3. Now it's time to plug it into the router. Checking with dmesg:

              ugen1.2: <huawei technology="">at usbus1
u3g0: <huawei 0="" 2="" technology="" huawei="" mobile,="" class="" 0,="" rev="" 2.00="" 1.02,="" addr="">on usbus1
u3g0: Found 1 port.
 followed by a lot of garbage about SCSI</huawei></huawei>

              We can have CD-ROM component disabled, this will remove the garbage but will give as wrong "idProduct".

              4. checking "idProduct="

              /root: usbconfig -d ugen1.2 dump_device_desc
ugen1.2: <huawei mobile="" huawei="" technology="">at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)

  bLength = 0x0012 
  bDescriptorType = 0x0001 
  bcdUSB = 0x0200 
  bDeviceClass = 0x0000 
  bDeviceSubClass = 0x0000 
  bDeviceProtocol = 0x0000 
  bMaxPacketSize0 = 0x0040 
  idVendor = 0x12d1 
  idProduct = 0x1c1e 
  bcdDevice = 0x0102 
  iManufacturer = 0x0002  <huawei technology="">iProduct = 0x0001  <huawei mobile="">iSerialNumber = 0x0000  <no string="">bNumConfigurations = 0x0001</no></huawei></huawei></huawei>

              5. pfSense 'knows' about "idProduct = 0x1c1e" and now we should have ue0 interface created. Checking:

              dmesg
ue0: <usb ethernet=""> on cdce0

ifconfig 
 ...
  ue0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
 ...</up,broadcast,running,simplex,multicast></usb>

              6. From the browser: Interfaces - (assign) - add new (OPT2) or take an existing and choose ue0 from dropdown.
              7. Enable OPT2 and set it to DHCP
              8. System - Gateways - set the new one as Default and check:

              /root: netstat -r
Routing tables

Internet:
Destination        Gateway            Flags      Netif Expire
default            192.168.8.1        UGS         ue0

              The modem will assign an IP to OPT2, in this example 192.168.8.1 is a LAN address of the modem.
              Modem will connect to the Internet automatically if configured on the modem.

              9. Navigate to NAT - Outbound - pick the rule for LAN subnet and configure the Interface (==gateway)

              10. make sure everything works

              1 Reply Last reply Reply Quote 0
              • R
                rajbps
                last edited by

                Hi AndrewZ

                Thanks for the guide.

                Still have a few questions, sorry if they are silly but never done it before.

                "In short - the main issue is with "idProduct = 0x1582". This modem does not have a "4G MODEM" in it's composition (check with AT^SETPORT=?), so the only option is to use it as a network card (NCM), but it seems that pfSense will not detect "cdce0" on the modem with unknown PID."

                I do get a 4G signal with this modem

                "But first I will post a WARNING:
                At some point a new interface ue0 will be created. If for some reasons the router will reboot while the modem is off or disconnected you will be trapped with the following message during boot:
                Quote

                Warning: Configuration references interfaces that do not exist: ue0
                    Network interface mismatch – Running interface assignment option.

                Have your console ready!"

                is there a way to avoid this, I think no but had to ask

                "Now the process:
                1. Flash the modem with the generic software like 21.290.21.00.00 (this is what I use)
                I cannot tell this is a mandatory, but most likely this is very important. Check the corresponding forums before flashing your modem if you don't need a brick :)
                You may need a flash code which is generated from IMEI."

                where can i get the firmware, this is a vodaphone one and if I go on the website of huawei, there is no firmware for this model

                Also as its usb connected and its going via productID, if i connect it to a different port, it should not be a problem should it. I think no again had to ask

                Regards,

                Raj

                1 Reply Last reply Reply Quote 0
                • A
                  AndrewZ
                  last edited by

                  The whole story has no relation to the radio part (3G, 4G, signal level, etc).

                  To avoid boot issues I suggest to always use the same USB port and keep the modem on. Alternatively you can have a backup configuration file with or without ue0 and load it then necessary.
                  idProduct or PID depends on the modem itself, on it's branding and composition (CD-ROM + Network card). You should see the same PID regardless of port your modem is plugged in.

                  I can send you some links to firmware files as well as a flash code. Please PM me with IMEI of the modem. Please be careful with upgrade - I heard that some people had issues loading generic/unbranded firmware on Vodafone branded 5372. Just search what people say.

                  Few other possibilities to complete the picture:

                  • on some modems it is possible to change a PID directly, never tried on 5372
                  • having support for the modern PIDs in the kernel will significantly simplify our lifes; at the moment people are patching/recompiling a kernel to their needs
                  1 Reply Last reply Reply Quote 0
                  • R
                    rajbps
                    last edited by

                    Hi AndrewZ,

                    Just send you a PM with the IMEI as requested.

                    Regards,

                    Raj

                    1 Reply Last reply Reply Quote 0
                    • I
                      igloox
                      last edited by

                      Hello

                      i would like to plug my Huawei E5372 to my virtual pfsense build on my esxi. But Esxi don't recognize it. (Generic firmware upgrade OK)

                      The AT commands  AT^SETPORT? returns:

                      ^SETPORT:A1,A2;12,16,A1,A2

                      Do you know the AT commands to resolve my problems?

                      Regards

                      1 Reply Last reply Reply Quote 0
                      • A
                        AndrewZ
                        last edited by

                        Hi igloox, just noticed your question

                        Please correct me if I'm wrong - you have an operator branded modem and you already loaded universal/generic firmware?
                        Could you please show the result of AT^NVRD=50071

                        Prior to that you need to unlock some commands with AT^DATALOCK="v201 code"
                        If you don't have the code - please PM me your IMEI.

                        1 Reply Last reply Reply Quote 0
                        • E
                          eiger3970
                          last edited by

                          Post 5, step 5, USB is seen by pfSense 2.4.4, however the interface ue0 does not appear?

                          1 Reply Last reply Reply Quote 0
                          • GiaNNG
                            GiaNN
                            last edited by GiaNN

                            Is there any news about the K5160? Now on FreeBSD14 it's still recognized as an usb mass device and not as an LTE mode. I think before buying a new LTE modem it's worth a shot.
                            In the system log i find this:

                            Sep 16 23:56:05 	ppp 	40698 	[opt1_link0] LCP: Down event
Sep 16 23:56:05 	ppp 	40698 	[opt1_link0] Link: DOWN event
Sep 16 23:56:05 	ppp 	40698 	[opt1_link0] MODEM: chat script failed
Sep 16 23:56:05 	ppp 	40698 	[opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
Sep 16 23:55:52 	ppp 	40698 	[opt1_link0] Link: reconnection attempt 5
Sep 16 23:55:49 	ppp 	40698 	[opt1_link0] Link: reconnection attempt 5 in 3 seconds
Sep 16 23:55:49 	ppp 	40698 	[opt1_link0] LCP: Down event
Sep 16 23:55:49 	ppp 	40698 	[opt1_link0] Link: DOWN event
Sep 16 23:55:49 	ppp 	40698 	[opt1_link0] MODEM: chat script failed
Sep 16 23:55:49 	ppp 	40698 	[opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
Sep 16 23:55:36 	ppp 	40698 	[opt1_link0] Link: reconnection attempt 4
Sep 16 23:55:33 	ppp 	40698 	[opt1_link0] Link: reconnection attempt 4 in 3 seconds
Sep 16 23:55:33 	ppp 	40698 	[opt1_link0] LCP: Down event
Sep 16 23:55:33 	ppp 	40698 	[opt1_link0] Link: DOWN event
Sep 16 23:55:33 	ppp 	40698 	[opt1_link0] MODEM: chat script failed
Sep 16 23:55:33 	ppp 	40698 	[opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
Sep 16 23:55:18 	ppp 	40698 	[opt1_link0] Link: reconnection attempt 3
Sep 16 23:55:16 	ppp 	40698 	[opt1_link0] Link: reconnection attempt 3 in 2 seconds
Sep 16 23:55:16 	ppp 	40698 	[opt1_link0] LCP: Down event
Sep 16 23:55:16 	ppp 	40698 	[opt1_link0] Link: DOWN event
Sep 16 23:55:16 	ppp 	40698 	[opt1_link0] MODEM: chat script failed
Sep 16 23:55:16 	ppp 	40698 	[opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
Sep 16 23:55:01 	ppp 	40698 	[opt1_link0] Link: reconnection attempt 2
Sep 16 23:55:00 	ppp 	40698 	[opt1_link0] Link: reconnection attempt 2 in 1 seconds
Sep 16 23:55:00 	ppp 	40698 	[opt1_link0] LCP: Down event
Sep 16 23:55:00 	ppp 	40698 	[opt1_link0] Link: DOWN event
Sep 16 23:55:00 	ppp 	40698 	[opt1_link0] MODEM: chat script failed
                            GiaNNG 1 Reply Last reply Reply Quote 0
                            • GiaNNG
                              GiaNN @GiaNN
                              last edited by

                              I also add that if i create a PPP the Huawei LED starts blinking until it reaches purple which should mean that it's connected but you should check the connection if it's active

                              stephenw10S 1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator @GiaNN
                                last edited by

                                @GiaNN said in Huawei k5160 4g usb mobile broadband:

                                if i create a PPP the Huawei LED starts blinking

                                Create it how?

                                There's a good chance there are multiple versions of that modem and that they behave differently, Many modems do.

                                Steve

                                GiaNNG 1 Reply Last reply Reply Quote 0
                                • stephenw10S stephenw10 moved this topic from Problems Installing or Upgrading pfSense Software on
                                • GiaNNG
                                  GiaNN @stephenw10
                                  last edited by GiaNN

                                  @stephenw10 through the interfaces GUI, in the section PPP.
                                  Then if i enable the interface the LED starts blinking but it cannot properly start PPP

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    So you see USB serial ports created? Like cuaU0-3?

                                    GiaNNG 1 Reply Last reply Reply Quote 0
                                    • GiaNNG
                                      GiaNN @stephenw10
                                      last edited by

                                      @stephenw10 i don't remember, where i see that?
                                      I used as device the /dev/cuau0 and then it started blinking if enabled.

                                      1 Reply Last reply Reply Quote 0
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        /dev/cuau0 is one of the on-board com ports not the modem. The ports created by a modem are shown with an uppercase 'U' to indicate they are USB connected.

                                        Plug in the modem and then check the system log. If it's recognised you will see log entries showing the new ports created.

                                        GiaNNG 1 Reply Last reply Reply Quote 0
                                        • GiaNNG
                                          GiaNN @stephenw10
                                          last edited by

                                          @stephenw10 in dmesg shows this:

                                          ugen2.2: <Vodafone (Huawei) Vodafone (Huawei)> at usbus2
umass0 on uhub0
umass0: <Mass Storage> on usbus2
cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0
cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device
cd0: Serial Number 0123456789ABCDEF
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd0: quirks=0x10<10_BYTE_ONLY>
da0 at umass-sim0 bus 0 scbus2 target 0 lun 1
da0: <HUAWEI TF CARD Storage 2.31> Removable Direct Access SCSI-2 device
da0: Serial Number 0123456789ABCDEF
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            last edited by stephenw10

                                            Ok, so u3g doesn't recognise it. You should see something like:

                                            uhub0: 8 ports with 8 removable, self powered
ugen0.2: <Huawei Technologies Co., Ltd. HUAWEI Mobile> at usbus0
u3g0 on uhub0
u3g0: <Huawei Mobile Connect - Modem> on usbus0
u3g0: Found 5 ports.

                                            If it can work at all it probably needs to be modeswitched. Or reflashed with different firmware.

                                            Note that the OP here never got this modem working, they switched to a different device. And I don't see an entry for it in u3g:
                                            https://github.com/pfsense/FreeBSD-src/blob/devel-main/sys/dev/usb/serial/u3g.c#L339

                                            Steve

                                            GiaNNG 1 Reply Last reply Reply Quote 1
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.