Issues updating from 2.3-RC (or older 2.3 installs) to 2.3-RELEASE

waves

That feature is not supported on pfSense 2.3. Your safest path is to reinstall the older version directly. Otherwise you'll end up with a mix of things all over the filesystem (which was one of many reasons that feature was removed…)

Better still would be to work and get snort working on 2.3. The package maintainer is very active in the IDS/IPS board here under packages. Post there for snort help, it's probably not a difficult fix.

This is very bad news… :( I will try to install the older version and restore config.xml. I have a post in IDS as well, but i'm in a production enviroment and... You get my point. Thank you for your reply.

serialdie

@waves:

That feature is not supported on pfSense 2.3. Your safest path is to reinstall the older version directly. Otherwise you'll end up with a mix of things all over the filesystem (which was one of many reasons that feature was removed…)

Better still would be to work and get snort working on 2.3. The package maintainer is very active in the IDS/IPS board here under packages. Post there for snort help, it's probably not a difficult fix.

This is very bad news… :( I will try to install the older version and restore config.xml. I have a post in IDS as well, but i'm in a production enviroment and... You get my point. Thank you for your reply.

Ouch!
2.3 is too new for production, Hence why I am using it at home/dev for now. Good luck.

serialdie

@jimp,

Thanks for the update… so far so good.

christian.arminio

Hello,

after update I've many problems and web gui shows always this message :

pfSense is booting, then packages will be reinstalled in the background.
Do not make changes in the GUI until this is complete.

I've tried the Jimp's guide at first post but it doesn't work :


pkg update -f
fetch -qo /usr/local/share/pfSense/keys/pkg/trusted/ https://raw.githubusercontent.com/pfsense/pfsense/RELENG_2_3_0/src/usr/local/share/pfSense/keys/pkg/trusted/pkg.pfsense.org.20160406
fetch: https://raw.githubusercontent.com/pfsense/pfsense/RELENG_2_3_0/src/usr/local/share/pfSense/keys/pkg/trusted/pkg.pfsense.org.20160406: Network is unreachable

Any help is very appreciated .
Best regards

MyKroFt

have done everything is post #1 am still stuck….

2.3-RELEASE (amd64)
built on Mon Apr 11 18:10:34 CDT 2016
FreeBSD 10.3-RELEASE

The system is on a later version than
the official release.

Myk

Gram

fetch -qo /usr/local/share/pfSense/keys/pkg/trusted/ https://raw.githubusercontent.com/pfsense/pfsense/RELENG_2_3_0/src/usr/local/share/pfSense/keys/pkg/trusted/pkg.pfsense.org.20160406

… worked for me. Thanks!

wirerogue

@jimp:

I just edited a fix into the first post for people who ended up on 2.3.1 or otherwise have a message saying they're on a version newer than the release. Should fix it all up.

worked for me. you da man!!!

YonNomNom

My pfsense box cant access the internet unless it is using a proxy (the proxy is separate to this instance of pfsense). It managed to update but now it is stuck attempting to download package metadata :(

pfsense.png_thumb

christian.arminio

@YonNomNom:

My pfsense box cant access the internet unless it is using a proxy (the proxy is separate to this instance of pfsense). It managed to update but now it is stuck attempting to download package metadata :(

Oh yes,

my problem is the same…. So now I know because I can't update my catalogue......
But how fix this issue ??

EDIT

Fixed…. After the upgrade to the new version no default gateway was selected by pfsense... So no route to Internet....

System_Routing_Gateways_Edit
Select This will select the above gateway as the default gateway

Super Regards

jimp

@christian.arminio:

after update I've many problems and web gui shows always this message :
pfSense is booting, then packages will be reinstalled in the background.
Do not make changes in the GUI until this is complete.
I've tried the Jimp's guide at first post but it doesn't work :

Diag > Backup/Restore, click the button to reset the package lock.

jimp

For those with other unrelated issues like proxies/gateways, please start new threads. This thread is only for the specific style of issues stated in the original post, thanks.

Guest

@wirerogue:

@jimp:

I just edited a fix into the first post for people who ended up on 2.3.1 or otherwise have a message saying they're on a version newer than the release. Should fix it all up.

worked for me. you da man!!!

Worked for me too…

lrosenman

@marjohh:

@wirerogue:

@jimp:

I just edited a fix into the first post for people who ended up on 2.3.1 or otherwise have a message saying they're on a version newer than the release. Should fix it all up.

worked for me. you da man!!!

Worked for me too…

Worked for me as well… THANK YOU!

fr0t

Hi all,

Just quick question… where if ntopng package gone? I cant see it in 'Available packages' tab. I did use it a lot and now I am stuck :/

tomaswaldow

@fr0t:

Hi all,

Just quick question… where if ntopng package gone? I cant see it in 'Available packages' tab. I did use it a lot and now I am stuck :/

https://doc.pfsense.org/index.php/2.3_Removed_Packages

edmund

pfSense is booting, then packages will be reinstalled in the background.
Do not make changes in the GUI until this is complete.

I had this problem a while back with my nano system at home earlier this year. I'd suggest looking through your config.xml file and see it there are any duplicate sections, mine had two sections setting up the local DHCP server on different subnets and once I deleted the bad one everything worked fine.

brianc69

I was on 2.3.1.xxxx and noticed this morning it was unable to check for updates and the packages section shows no packages installed. I went to diagnostics/command prompt and tried pkg upgrade -f and got:

Updating pfSense-core repository catalogue…
pfSense-core repository is up-to-date.
Updating pfSense repository catalogue...
pfSense repository is up-to-date.
All repositories are up-to-date.
New version of pkg detected; it needs to be installed first.
The following 1 package(s) will be affected (of 0 checked):

Installed packages to be UPGRADED:
pkg: 1.7.2 -> 1.7.2_1 [pfSense]

2 MiB to be downloaded.

Proceed with this action? [y/N]:

How does one and the y/N question??? Is this even the answer to my problem?

jimp

@brianc69:

I was on 2.3.1.xxxx and noticed this morning it was unable to check for updates and the packages section shows no packages installed. I went to diagnostics/command prompt and tried pkg upgrade -f and got:

Updating pfSense-core repository catalogue…
pfSense-core repository is up-to-date.
Updating pfSense repository catalogue...
pfSense repository is up-to-date.
All repositories are up-to-date.
New version of pkg detected; it needs to be installed first.
The following 1 package(s) will be affected (of 0 checked):

Installed packages to be UPGRADED:
pkg: 1.7.2 -> 1.7.2_1 [pfSense]

2 MiB to be downloaded.

Proceed with this action? [y/N]:

How does one and the y/N question??? Is this even the answer to my problem?

'y' is OK there. But please read the original post of the thread, second section, last entry.

brianc69

The problem is you can't answer Y or N in the web gui.

wirerogue

@brianc69:

The problem is you can't answer Y or N in the web gui.

don't run it from the web gui. use the console.