Beta test of new NUT UPS package
-
One last thing… if it takes me a while to respond, please be patient with me. I have a lot going on right now. :)
-
Did you created github pull request already?
What's new coming?
It would be good if NUT can get a new option like "keep service alive" fixing this bug — https://redmine.pfsense.org/issues/6571
Currently I'am using CRON to run the script that checks if NUT is running and starts it if not. -
It is a completely new version of the nut package, written from scratch. It brings an all new gui and alignment with current NUT architecture. PR will follow some initial testing.
-
Denny, the new package is very nice! Great work! It installed cleanly and ran great the first time. I love the more easy to understand options and the status screen looks great.
I did find an issue. Following a reboot, it was unable to chdir to /var/db/nut as I have my /var in a ramdisk because I am running on mirrored SSDs for system drives.
-
Thanks Ben. I actually have code to fix up a missing /var/db/nut, but it's currently only run at install time to fix a problem with the prior nut package. It's easy enough to move the fix up check to be executed at each config sync. I'll have it for you when I get back in a day or two.
I did find an issue. Following a reboot, it was unable to chdir to /var/db/nut as I have my /var in a ramdisk because I am running on mirrored SSDs for system drives.
-
Btw, do you mind posting the ups type and driver that you are testing with?
-
Hi,
I'm running a generic asian ups with the following
(Various USB)
UPSilon 2000 software blazer_usb langid_fix=0x409It installed perfectly, looks great, unfortunately it gives me
"Failed to retrieve status"
-
Thanks Ben. I actually have code to fix up a missing /var/db/nut, but it's currently only run at install time to fix a problem with the prior nut package. It's easy enough to move the fix up check to be executed at each config sync. I'll have it for you when I get back in a day or two.
Awesome, that should be a rather easy fix!
Btw, do you mind posting the ups type and driver that you are testing with?
I will have to check this evening after I get home with access to the server.
-
Several questions:
What messages are in the system log? Look for messages from upsd, upsmon, upsdrvctl, blazer*.
What are the contents of /usr/local/etc/nut/ups.conf and upsd.conf?
What nut processes are running? (ps -axuwww | grep ups)
Does anything change if you restart the nut service via the nut status page or the services page?
Have you successfully tested this specific ups model with nut previously?I'm running a generic asian ups with the following
(Various USB)
UPSilon 2000 software blazer_usb langid_fix=0x409It installed perfectly, looks great, unfortunately it gives me
"Failed to retrieve status"
-
USB type: Local USB
Driver: usbhid -
Hey Starrbuck, I sent you an update that should address your ram disk issue. Please let me know that it works for you. Thanks.
-
Got it, thanks!
-
Hey Starrbuck, I sent you an update that should address your ram disk issue. Please let me know that it works for you. Thanks.
The ramdisk issue is corrected. Upon rebooting the package started up normally and the status looks fine.
-
Good to hear. Thanks again for testing.
-
w0w, I may have an approach that will address the SNMP unreachable on startup issue issue. Give me a couple of days, and I'll let you know. In the mean time, please test the existing beta2 version. Thanks.
-
UPS Status — OFF, but displayed battery charge and load are OK.
Fixed with an extra argument for driver.
mibs=ietf
Looks much better now :)
Good job!P.S. Don't look at I/O Voltage at first picture, it's Powercom firmware bug that could not be fixed anyway.
-
Can I request some features for package? (lowest priority in your list) :)
1. I want shutdown pfsense before battery get LOW condition, for example after running 5 minutes on battery, I have seen some implementations using internal nut scripting, but not for pfsense. Feature is very similar to what APCUPSD already have for years.
2. It would be good to kill UPS power, sending command to shutdown UPS, like APCUPSD doing it.BTW I am using APCUPSD on windows for the same UPS.
-
Several questions:
What messages are in the system log? Look for messages from upsd, upsmon, upsdrvctl, blazer*.
upsmon 73821 Poll UPS [sunpac] failed - Driver not connected
upsd 71207 Can't connect to UPS [sunpac] (blazer_usb-sunpac): No such file or directoryWhat are the contents of /usr/local/etc/nut/ups.conf and upsd.conf?
sunpac]
driver=blazer_usb
port=auto
langid_fix=0x4095
subdriver=krauler
productid=1234
vendorid=0925LISTEN 127.0.0.1
LISTEN ::1What nut processes are running? (ps -axuwww | grep ups)
ps -axuwww | grep ups
root 71207 0.0 0.0 20712 2368 - Ss 6:10PM 0:00.24 /usr/local/sbin/upsd -u root
root 72651 0.0 0.0 16612 2308 - Is 6:10PM 0:00.00 /usr/local/sbin/upsmon
uucp 73821 0.0 0.0 16612 2340 - S 6:10PM 0:00.20 /usr/local/sbin/upsmon
root 58229 0.0 0.0 18740 2240 0 S+ 9:44PM 0:00.00 grep upsDoes anything change if you restart the nut service via the nut status page or the services page?
No
Have you successfully tested this specific ups model with nut previously?
No
I'm running a generic asian ups with the following
(Various USB)
UPSilon 2000 software blazer_usb langid_fix=0x409It installed perfectly, looks great, unfortunately it gives me
"Failed to retrieve status"
-
I have "tecnoware" UPS, some ERA series but not the same as listed in NUT supported devices. It have similar behavior to yours, johnabbot
Playing with driver options not helped, strange… but UPSilon 2000 works under windows environment at least. -
John, it looks like the usb information for the ups doesn't match. I would recommend dumping the usb information on the device and heading over to the NUT forums with it. You can dump the usb information with the following command on the console:
usbconfig dump_device_desc
