NUT package under pfSense 2.3.2: Status and configuration page not accessible
-
Thank your for the quick reply. It's good to know that the issue is fixed.
However, I am not sure about correct understanding of "fixed for community". Does it mean that it is just fixed in the github repository (https://github.com/pfsense/FreeBSD-ports/commits/devel/sysutils/pfSense-pkg-nut) but not yet repackaged for regular package update using the pfSense webGUI?
Is there a way to pull in your recent changes of the NUT package or do I have to wait for version 2.7.3?
-
Community refers to the Community Edition of pfSense. If you are using the community edition, you should see version 2.7.4 as available. Re-install the NUT package and it should be correct.
-
Yes, I am using the community edition and reinstallation of the package has even been my first thought. But when using the package management I would have expected a newer package version than 2.3.1 and therefore I did not go further in my first attempt.
Now I have reinstalled the package and everything works as expected.
Thank you.
-
I just upgraded from 2.3.1_5 to 2.3.2 (Community Edition) and have the same issue. ups_status.php returns 404 not found.
I have uninstalled and then reinstalled nut 2.7.4_1
This did not resolve the issue.Perhaps the error "XML error: PKGINFOLINK at line 8 cannot occur more than once" shown in the installation log below is a relevant clue.
>>> Installing pfSense-pkg-nut... Updating pfSense-core repository catalogue... pfSense-core repository is up-to-date. Updating pfSense repository catalogue... pfSense repository is up-to-date. All repositories are up-to-date. The following 4 package(s) will be affected (of 0 checked): New packages to be INSTALLED: pfSense-pkg-nut: 2.7.4_1 [pfSense] nut: 2.7.4 [pfSense] neon: 0.30.1 [pfSense] net-snmp: 5.7.3_11 [pfSense] Number of packages to be installed: 4 The process will require 17 MiB more space. 1 MiB to be downloaded. Fetching nut-2.7.4.txz: .......... done Fetching neon-0.30.1.txz: .......... done Checking integrity... done (0 conflicting) [1/4] Installing neon-0.30.1... [1/4] Extracting neon-0.30.1: .......... done [2/4] Installing net-snmp-5.7.3_11... [2/4] Extracting net-snmp-5.7.3_11: .......... done [3/4] Installing nut-2.7.4... [3/4] Extracting nut-2.7.4: .......... done [4/4] Installing pfSense-pkg-nut-2.7.4_1... [4/4] Extracting pfSense-pkg-nut-2.7.4_1: .......... done XML error: PKGINFOLINK at line 8 cannot occur more than once Message from net-snmp-5.7.3_11: **** This port installs snmpd, header files and libraries but does not start snmpd by default. If you want to auto-start snmpd and snmptrapd:, add the following to /etc/rc.conf: snmpd_enable="YES" snmpd_flags="-a" snmpd_conffile="/usr/local/share/snmp/snmpd.conf /etc/snmpd.conf" snmptrapd_enable="YES" snmptrapd_flags="-a -p /var/run/snmptrapd.pid" **** You may also specify the following make variables: NET_SNMP_SYS_CONTACT="zi@FreeBSD.org" NET_SNMP_SYS_LOCATION="USA" DEFAULT_SNMP_VERSION=3 NET_SNMP_MIB_MODULES="host smux mibII/mta_sendmail ucd-snmp/diskio" NET_SNMP_LOGFILE=/var/log/snmpd.log NET_SNMP_PERSISTENTDIR=/var/net-snmp to define default values (or to override the defaults). To avoid being prompted during the configuration process, you should (minimally) define the first two variables. (NET_SNMP_SYS_*) You may also define the following to avoid all interactive configuration: BATCH="yes" >>> Cleaning up cache... done. Success -
Same here. No service showing in dropdown and although UPS widget is available show the "Monitoring is not Enabled"
From the reinstall:
Installed packages to be REINSTALLED:
pfSense-pkg-nut-2.7.4_1 [pfSense]Number of packages to be reinstalled: 1
[1/1] Reinstalling pfSense-pkg-nut-2.7.4_1…
[1/1] Extracting pfSense-pkg-nut-2.7.4_1: …....... done
The nut package is not installed.Deletion aborted.XML error: PKGINFOLINK at line 8 cannot occur more than once
Cleaning up cache... done.
SuccessPackage shows installed in the dashboard??
-
@abauer:
I just upgraded from 2.3.1_5 to 2.3.2 (Community Edition) and have the same issue. ups_status.php returns 404 not found.
I have uninstalled and then reinstalled nut 2.7.4_1
This did not resolve the issue.Perhaps the error "XML error: PKGINFOLINK at line 8 cannot occur more than once" shown in the installation log below is a relevant clue.
As noted in other threads, 2.7.4_1 from the community and factory package servers are corrupt and will not install. The version from the beta package server is correct. I expect that the community and factory packages will be fixed as soon as someone is available on Monday.
If you have a critical need to install the package before then, you can PM me with an email address and I will send you a copy of the package.
-
It's all fixed now and tagged with 2.7.4_2
-
Thanks for the update and for fixing the issue.
-
I'm on pfSense 2.3.2, I did an update to NUT package 2.7.4_1. The service wouldn't start and the NUT services page didn't appear in the Services drop-down menu. This evening I updated to the NUT 2.7.4_2 package and am having the same problems, even following a service reinstall.
-
Ok, got it figured out. I had to do a full uninstall/reinstall, then realize that the name of the service in Services changed from NUT to UPS, then had to visit Services | UPS and review the settings and accept the changes to accommodate version changes to the settings. The service was then able to start and all seems to be working now.
-
Glad you got it sorted. Btw, there is an info link for the package. It shows up as an i in a circle in the package manager. This thread has information on the package that might be helpful.
-
using the command line from the other thread to completely remove, then reinstalling with the _2 package, all is well. Thanks.
Nice detail on the settings page as far parameters being seen. -
I have just upgraded to NUT 2.7.4_2 package without any issues. A prior deinstallation was not neccessary. Configuration was automatically converted to the new version. I just had to confirm the auto-conversion.
The dashboard UPS widget, however, was automatically removed. But it could be installed again.
I should mention, that my pfSense machine is not the NUT master of my UPS.
Currently I am very happy with the new NUT package.
-
-
Hi, I just upgraded my pfsense box from 2.3.1_5 to 2.3.2 and I got same issue with NUT.
I uninstalled the NUT package and reinstalled it to get it working again.BUT: un the Services Tab, I now have 2 entries: NUT (old one that brings me a 404 error) and UPS the actual ups setup page.
Do you know how can I remove the old NUT entry of the Services menu ?
Thanks.
-
-
Thanks dennypage, config file edited successfully.
