Newbie question about LAN To WAN
-
any one please help.
-
why would you not just create a vpn with your asa to your lab?
Your site A machines gateway is what? Your asa or your isp router? Something in 172.16.0/24
How would they know to go down some tunnel you have created on some pfsense machine to some lab? Your trying to put your whole site A behind pfsense?? So there are no more machines on 192.168.170???
Yeah that drawing sucks ;)
Why does this lab not just create a vpn tunnel to your HQ network like your other sites?
-
why would you not just create a vpn with your asa to your lab? I don't have access to ASA box.
Your site A machines gateway is what? Your asa or your isp router? Something in 172.16.0/24 ASA are gateways.
How would they know to go down some tunnel you have created on some pfsense machine to some lab? Your trying to put your whole site A behind pfsense?? So there are no more machines on 192.168.170??? **Yes, I'm putting all machines behind pfsense. No more machine on 192.168.170. **
Yeah that drawing sucks ;) he he.. yep..
Why does this lab not just create a vpn tunnel to your HQ network like your other sites? That.. I don't know why.. sorry
-
You should be able to make client connections out from pfSense to Lab without needing access to the ASA. Unless they are blocking all but certain outgoing connections or being otherwise aggressive on outbound.
You will not be able to get a server running there without access to the ASA unless they are already forwarding a port to you from the outside that you can use instead. Preferably a UDP port.
Probably your best bet is to put pfSense at Lab and run the OpenVPN server there. Make 192.168.170.2 the OpenVPN client.
This seems like something that should be run by whomever is actually responsible for the security of these two sites though. Like the guy with the ASA credentials. Another IPsec tunnel from Lab with access to 192.168.170.0/24 seems like the way to go there.
-
No Problem accessing from Site A Pfsense 172.16. machines to Lab net at the moment as per Proposed Network diagram.
The problem is accessing from Site B to Site A Pfsense machines.
Am I correct in understanding your suggestion is to make OpenVPN client range 192.168.170 . Will this allow Site B 192.168.160 range to communicate with 172.16 range?
Sorry if it is a silly question.
-
For that you will probably have to add VIPs on pfSense WAN and 1:1 NAT then to the inside hosts and pass the traffic on pfSense WAN.
You might be able to get away with just 1:1 the whole /24 in that case.
Firewall, Virtual IPsType: Proxy ARP
Interface: WAN
Address Type: Network
Address(es): 192.168.170.0/24Firewall > NAT, 1:1
Interface: WAN
External subnet IP: 192.168.170.0/24
Internal IP: Network: 172.16.0.0/24
Destination: Not: Checked WAN addressOn WAN pass IPv4 port any source 192.168.160.0/24 dest 192.168.170.0/24
No idea what types of connections that NAT will break.
I am also unsure about the Not WAN address. Seems to make sense that you would need to bypass NAT for WAN address there.
-
Thank you. :) I will try it on Monday and report back to you guys.
-
In case it's not clear, they will still think they are talking to, say, 192.168.170.101 but they will really be going through NAT and talking to 172.16.0.101
-
Sorry. Being a bit thick here. So what shall I do now.
-
The same thing.
