Temperature Reading on AMD

markn62

Thats a good idea but then I still have a broken temperature status. Your right the cpu is a bit old. I think I'll cut my time losses and try an A6-7470K. If it works I'll keep the 5400 as a back up.

Fahrenhe1t

Actually, I think the CPU is fine, it's just that amdtemp.ko isn't always updated with "new" CPU's. If you don't have any luck with the new CPU, I might be able to try and compile a new amdtemp.ko, you'd just have to tell me what the CPU ID is. In the source code, the CPU ID's look like this:


#define        DEVICEID_AMD_MISC14     0x1703
#define        DEVICEID_AMD_MISC15     0x1603
#define        DEVICEID_AMD_MISC16     0x1533
#define        DEVICEID_AMD_MISC16_X3  0X1583

The last one is the ID for my A10 Micro-6700T. I have no idea how that can be found though.

markn62

The newer cpu reports the same. I'll look for the DEVICEID.

markn62

The only ID I find is 630F81. Not sure where those txt strings come from in the amdtemp.ko file.

Fahrenhe1t

Hey, I found a thread which has updated DEVICEID's (http://www.pcengines.info/forums/?page=post&id=795B2ACC-F4B0-4181-9B4A-54EC757D4001&fid=DF5ACB70-99C4-4C61-AFA6-4C0E0DB05B2A). The guy (Stephan) said he compiled the latest version and uploaded it here: http://s000.tinyupload.com/index.php?file_id=70328254396185987242

Maybe you can try that one?

markn62

I downloaded the file you linked too, with WinSCP I removed the old /boot/kernel/amdtemp.ko and copied new file to /root, then followed the instructions;

kldunload amdtemp
cp /root/amdtemp.ko /boot/kernel/
kldload /boot/kernel/amdtemp.ko

Still reports 0C.

z3us

I'm receiving:
kldload: an error occurred while loading the module. Please check dmesg(8) for more details.

Followed every step as described.
Using pfSense 2.3.2-RELEASE-p1

Any ideas?

Fahrenhe1t

@z3us:

I'm receiving:
kldload: an error occurred while loading the module. Please check dmesg(8) for more details.

Followed every step as described.
Using pfSense 2.3.2-RELEASE-p1

Any ideas?

From the shell, when you type:
kldload /boot/kernel/amdtemp.ko

what happens? Also, if you type after loading:
dmesg

What does it say?

z3us

@Fahrenhe1t:

@z3us:

I'm receiving:
kldload: an error occurred while loading the module. Please check dmesg(8) for more details.

Followed every step as described.
Using pfSense 2.3.2-RELEASE-p1

Any ideas?

From the shell, when you type:
kldload /boot/kernel/amdtemp.ko

what happens? Also, if you type after loading:
dmesg

What does it say?

Hi Fahrenhe1t!

Error quoted:

kldload: an error occurred while loading the module. Please check dmesg(8) for more details.

dmesg output quoted:

Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE-p9 #1 5fc1b19(RELENG_2_3_2): Tue Sep 27 12:26:06 CDT 2016
    root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: AMD GX-412TC SOC                                (998.16-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x730f01  Family=0x16  Model=0x30  Stepping=1
  Features=0x178bfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,htt>Features2=0x3ed8220b <sse3,pclmulqdq,mon,ssse3,cx16,sse4.1,sse4.2,movbe,popcnt,aesni,xsave,osxsave,avx,f16c>AMD Features=0x2e500800 <syscall,nx,mmx+,ffxsr,page1gb,rdtscp,lm>AMD Features2=0x1d4037ff <lahf,cmp,svm,extapic,cr8,abm,sse4a,mas,prefetch,osvw,ibs,skinit,wdt,topology,pnxc,dbe,ptsc,pl2i>Structured Extended Features=0x8 <bmi1>XSAVE Features=0x1 <xsaveopt>SVM: NP,NRIP,AFlush,DAssist,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 2012930048 (1919 MB)
avail memory = 1908260864 (1819 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <core  coreboot="">
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
random: <software, yarrow=""> initialized
ioapic1: Changing APIC ID to 5
ioapic0 <version 2.1=""> irqs 0-23 on motherboard
ioapic1 <version 2.1=""> irqs 24-55 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80620930, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806209e0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80620a90, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80647c30, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80647ce0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80647d90, 0) error 1
netmap: loaded module
kbd0 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff81016c90, 0) error 19
cryptosoft0: <software crypto=""> on motherboard
padlock0: No ACE support.
acpi0: <core coreboot=""> on motherboard
acpi0: Power Button (fixed)
cpu0: <acpi cpu=""> on acpi0
cpu1: <acpi cpu=""> on acpi0
cpu2: <acpi cpu=""> on acpi0
cpu3: <acpi cpu=""> on acpi0
atrtc0: <at realtime="" clock=""> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <at timer=""> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0
hpet0: <high precision="" event="" timer=""> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
acpi_button0: <power button=""> on acpi0
pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus=""> on pcib0
pcib1: <acpi pci-pci="" bridge=""> at device 2.2 on pci0
pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff
pci1: <acpi pci="" bus=""> on pcib1
igb0: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k=""> mem 0xfe600000-0xfe61ffff,0xfe620000-0xfe623fff at device 0.0 on pci1
igb0: Using MSIX interrupts with 3 vectors
igb0: Ethernet address: 00:0d:b9:42:b2:d8
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <acpi pci-pci="" bridge=""> at device 2.3 on pci0
pci2: <acpi pci="" bus=""> on pcib2
igb1: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k=""> port 0x2000-0x201f mem 0xfe700000-0xfe71ffff,0xfe720000-0xfe723fff at device 0.0 on pci2
igb1: Using MSIX interrupts with 3 vectors
igb1: Ethernet address: "MAC removed"
igb1: Bound queue 0 to cpu 2
igb1: Bound queue 1 to cpu 3
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <acpi pci-pci="" bridge=""> at device 2.4 on pci0
pci3: <acpi pci="" bus=""> on pcib3
igb2: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k=""> port 0x3000-0x301f mem 0xfe800000-0xfe81ffff,0xfe820000-0xfe823fff at device 0.0 on pci3
igb2: Using MSIX interrupts with 3 vectors
igb2: Ethernet address: "MAC removed"
igb2: Bound queue 0 to cpu 0
igb2: Bound queue 1 to cpu 1
igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pci0: <encrypt decrypt=""> at device 8.0 (no driver attached)
xhci0: <xhci (generic)="" usb="" 3.0="" controller=""> mem 0xfeb22000-0xfeb23fff at device 16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
ahci0: <amd hudson-2="" ahci="" sata="" controller=""> port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xfeb25000-0xfeb253ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <ahci channel=""> at channel 0 on ahci0
ahcich1: <ahci channel=""> at channel 1 on ahci0
ehci0: <ehci (generic)="" usb="" 2.0="" controller=""> mem 0xfeb25400-0xfeb254ff at device 19.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
isab0: <pci-isa bridge=""> at device 20.3 on pci0
isa0: <isa bus=""> on isab0
sdhci_pci0: <generic sd="" hci=""> mem 0xfeb25500-0xfeb255ff at device 20.7 on pci0
sdhci_pci0: 1 slot(s) allocated
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <isa option="" roms=""> at iomem 0xc0000-0xc0fff,0xef000-0xeffff on isa0
ppc0: cannot reserve I/O port range
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
hwpstate0: <cool`n'quiet 2.0=""> on cpu0
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <0x1022> at usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <amd> at usbus1
uhub1: <amd 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus1
uhub0: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x0438=""> at usbus1
uhub2: <vendor 2="" 9="" 0x0438="" product="" 0x7900,="" class="" 0,="" rev="" 2.00="" 0.18,="" addr=""> on usbus1
uhub2: 4 ports with 4 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <kingston sms200s330g="" 608abbf0=""> ATA8-ACS SATA 3.x device
ada0: Serial Number 50026B726804B473
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 28626MB (58626288 512 byte sectors)
ada0: Previously was known as ad4
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 998158596 Hz quality 1000
Trying to mount root from ufs:/dev/ufsid/56e218df8303838d [rw]...
padlock0: No ACE support.
aesni0: <aes-cbc,aes-xts,aes-gcm,aes-icm> on motherboard
pflog0: promiscuous mode enabled
igb1: link state changed to UP
igb1: link state changed to DOWN
igb1: link state changed to UP
igb0: link state changed to UP
igb1: link state changed to DOWN
igb1: link state changed to UP
arpresolve: can't allocate llinfo for 192.168.2.254 on igb0
arp: ec:8a:4c:a5:c5:9e is using my IP address 192.168.2.253 on igb0!
arp: 10.101.0.104 moved from "MAC removed" to "MAC removed" on igb1
arp: 10.101.0.104 moved from "MAC removed" to "MAC removed" on igb1</aes-cbc,aes-xts,aes-gcm,aes-icm></kingston></vendor></vendor></amd></amd></cool`n'quiet></isa></generic></isa></pci-isa></ehci></ahci></ahci></amd></xhci></encrypt></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></acpi></acpi></power></high></at></at></acpi></acpi></acpi></acpi></core></software></version></version></software,></core ></xsaveopt></bmi1></lahf,cmp,svm,extapic,cr8,abm,sse4a,mas,prefetch,osvw,ibs,skinit,wdt,topology,pnxc,dbe,ptsc,pl2i></syscall,nx,mmx+,ffxsr,page1gb,rdtscp,lm></sse3,pclmulqdq,mon,ssse3,cx16,sse4.1,sse4.2,movbe,popcnt,aesni,xsave,osxsave,avx,f16c></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,htt>

hda

@z3us:

I'm receiving:
kldload: an error occurred while loading the module. Please check dmesg(8) for more details.

Followed every step as described.
Using pfSense 2.3.2-RELEASE-p1

Any ideas?

It works with APU2 just only starting from pfSense 2.4 / FreeBSD-11 ;)

z3us

@hda:

@z3us:

I'm receiving:
kldload: an error occurred while loading the module. Please check dmesg(8) for more details.

Followed every step as described.
Using pfSense 2.3.2-RELEASE-p1

Any ideas?

It works with APU2 just only starting from pfSense 2.4 / FreeBSD-11 ;)

Thanks for your answer, but damn.
I thought I was already on the latest version… where can I find the 2.4 ISO?

Fahrenhe1t

It's in beta at: https://snapshots.pfsense.org/

z3us

@Fahrenhe1t:

It's in beta at: https://snapshots.pfsense.org/

Thanks!
I'm running some units in production environment, so will be testing this release in my testlab and wait for stable release for my production environment.

Fahrenhe1t

Seems strange though, people confirmed in another thread that the 10.3 amdtemp.ko worked on your chip (https://forum.pfsense.org/index.php?topic=106444.msg631137#msg631137)…

markn62

Suddenly out of the blue I notice now the temps are correct in the GUI. No firmware upgrade since last post. No idea how it started working. Added some 1:1's, a few rules, bout it since. Odd…

markn62

Come to find out the A6-7470K did fix the problem. I wasn't told it got dropped in the router box.

@markn62:

Thats a good idea but then I still have a broken temperature status. Your right the cpu is a bit old. I think I'll cut my time losses and try an A6-7470K. If it works I'll keep the 5400 as a back up.

kevindd992002

@Fahrenhe1t

Do you really have to place amdtemp.ko in /boot/modules as well? I don't see any amtemp.ko file there by default.

AfTaStEr

is there anyway to see the temp readings on a AMD Sempron 2200+ cpu? AMD K7

unnes

@Fahrenhe1t:

Hey, I found a thread which has updated DEVICEID's (http://www.pcengines.info/forums/?page=post&id=795B2ACC-F4B0-4181-9B4A-54EC757D4001&fid=DF5ACB70-99C4-4C61-AFA6-4C0E0DB05B2A). The guy (Stephan) said he compiled the latest version and uploaded it here: http://s000.tinyupload.com/index.php?file_id=70328254396185987242

Maybe you can try that one?

Thanks, this version of amdtemp.ko worked for me on 2.3.4-DEVELOPMENT (amd64)! Now I can see just how ridiculously hot my new fanless router is getting… ;)