Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Temperature Reading on AMD

    Scheduled Pinned Locked Moved Hardware
    55 Posts 14 Posters 24.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • F
      Fahrenhe1t
      last edited by

      @z3us:

      I'm receiving:
      kldload: an error occurred while loading the module. Please check dmesg(8) for more details.

      Followed every step as described.
      Using pfSense 2.3.2-RELEASE-p1

      Any ideas?

      From the shell, when you type:
          kldload /boot/kernel/amdtemp.ko

      what happens?  Also, if you type after loading:
          dmesg

      What does it say?

      1 Reply Last reply Reply Quote 0
      • Z
        z3us
        last edited by

        @Fahrenhe1t:

        @z3us:

        I'm receiving:
        kldload: an error occurred while loading the module. Please check dmesg(8) for more details.

        Followed every step as described.
        Using pfSense 2.3.2-RELEASE-p1

        Any ideas?

        From the shell, when you type:
            kldload /boot/kernel/amdtemp.ko

        what happens?  Also, if you type after loading:
            dmesg

        What does it say?

        Hi Fahrenhe1t!

        Error quoted:

        kldload: an error occurred while loading the module. Please check dmesg(8) for more details.

        dmesg output quoted:

        Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE-p9 #1 5fc1b19(RELENG_2_3_2): Tue Sep 27 12:26:06 CDT 2016
    root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: AMD GX-412TC SOC                                (998.16-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x730f01  Family=0x16  Model=0x30  Stepping=1
  Features=0x178bfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,htt>Features2=0x3ed8220b <sse3,pclmulqdq,mon,ssse3,cx16,sse4.1,sse4.2,movbe,popcnt,aesni,xsave,osxsave,avx,f16c>AMD Features=0x2e500800 <syscall,nx,mmx+,ffxsr,page1gb,rdtscp,lm>AMD Features2=0x1d4037ff <lahf,cmp,svm,extapic,cr8,abm,sse4a,mas,prefetch,osvw,ibs,skinit,wdt,topology,pnxc,dbe,ptsc,pl2i>Structured Extended Features=0x8 <bmi1>XSAVE Features=0x1 <xsaveopt>SVM: NP,NRIP,AFlush,DAssist,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 2012930048 (1919 MB)
avail memory = 1908260864 (1819 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <core  coreboot="">
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
random: <software, yarrow=""> initialized
ioapic1: Changing APIC ID to 5
ioapic0 <version 2.1=""> irqs 0-23 on motherboard
ioapic1 <version 2.1=""> irqs 24-55 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80620930, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806209e0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80620a90, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80647c30, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80647ce0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80647d90, 0) error 1
netmap: loaded module
kbd0 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff81016c90, 0) error 19
cryptosoft0: <software crypto=""> on motherboard
padlock0: No ACE support.
acpi0: <core coreboot=""> on motherboard
acpi0: Power Button (fixed)
cpu0: <acpi cpu=""> on acpi0
cpu1: <acpi cpu=""> on acpi0
cpu2: <acpi cpu=""> on acpi0
cpu3: <acpi cpu=""> on acpi0
atrtc0: <at realtime="" clock=""> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <at timer=""> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0
hpet0: <high precision="" event="" timer=""> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
acpi_button0: <power button=""> on acpi0
pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus=""> on pcib0
pcib1: <acpi pci-pci="" bridge=""> at device 2.2 on pci0
pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff
pci1: <acpi pci="" bus=""> on pcib1
igb0: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k=""> mem 0xfe600000-0xfe61ffff,0xfe620000-0xfe623fff at device 0.0 on pci1
igb0: Using MSIX interrupts with 3 vectors
igb0: Ethernet address: 00:0d:b9:42:b2:d8
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <acpi pci-pci="" bridge=""> at device 2.3 on pci0
pci2: <acpi pci="" bus=""> on pcib2
igb1: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k=""> port 0x2000-0x201f mem 0xfe700000-0xfe71ffff,0xfe720000-0xfe723fff at device 0.0 on pci2
igb1: Using MSIX interrupts with 3 vectors
igb1: Ethernet address: "MAC removed"
igb1: Bound queue 0 to cpu 2
igb1: Bound queue 1 to cpu 3
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <acpi pci-pci="" bridge=""> at device 2.4 on pci0
pci3: <acpi pci="" bus=""> on pcib3
igb2: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k=""> port 0x3000-0x301f mem 0xfe800000-0xfe81ffff,0xfe820000-0xfe823fff at device 0.0 on pci3
igb2: Using MSIX interrupts with 3 vectors
igb2: Ethernet address: "MAC removed"
igb2: Bound queue 0 to cpu 0
igb2: Bound queue 1 to cpu 1
igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pci0: <encrypt decrypt=""> at device 8.0 (no driver attached)
xhci0: <xhci (generic)="" usb="" 3.0="" controller=""> mem 0xfeb22000-0xfeb23fff at device 16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
ahci0: <amd hudson-2="" ahci="" sata="" controller=""> port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xfeb25000-0xfeb253ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <ahci channel=""> at channel 0 on ahci0
ahcich1: <ahci channel=""> at channel 1 on ahci0
ehci0: <ehci (generic)="" usb="" 2.0="" controller=""> mem 0xfeb25400-0xfeb254ff at device 19.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
isab0: <pci-isa bridge=""> at device 20.3 on pci0
isa0: <isa bus=""> on isab0
sdhci_pci0: <generic sd="" hci=""> mem 0xfeb25500-0xfeb255ff at device 20.7 on pci0
sdhci_pci0: 1 slot(s) allocated
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <isa option="" roms=""> at iomem 0xc0000-0xc0fff,0xef000-0xeffff on isa0
ppc0: cannot reserve I/O port range
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
hwpstate0: <cool`n'quiet 2.0=""> on cpu0
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <0x1022> at usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <amd> at usbus1
uhub1: <amd 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus1
uhub0: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x0438=""> at usbus1
uhub2: <vendor 2="" 9="" 0x0438="" product="" 0x7900,="" class="" 0,="" rev="" 2.00="" 0.18,="" addr=""> on usbus1
uhub2: 4 ports with 4 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <kingston sms200s330g="" 608abbf0=""> ATA8-ACS SATA 3.x device
ada0: Serial Number 50026B726804B473
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 28626MB (58626288 512 byte sectors)
ada0: Previously was known as ad4
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 998158596 Hz quality 1000
Trying to mount root from ufs:/dev/ufsid/56e218df8303838d [rw]...
padlock0: No ACE support.
aesni0: <aes-cbc,aes-xts,aes-gcm,aes-icm> on motherboard
pflog0: promiscuous mode enabled
igb1: link state changed to UP
igb1: link state changed to DOWN
igb1: link state changed to UP
igb0: link state changed to UP
igb1: link state changed to DOWN
igb1: link state changed to UP
arpresolve: can't allocate llinfo for 192.168.2.254 on igb0
arp: ec:8a:4c:a5:c5:9e is using my IP address 192.168.2.253 on igb0!
arp: 10.101.0.104 moved from "MAC removed" to "MAC removed" on igb1
arp: 10.101.0.104 moved from "MAC removed" to "MAC removed" on igb1</aes-cbc,aes-xts,aes-gcm,aes-icm></kingston></vendor></vendor></amd></amd></cool`n'quiet></isa></generic></isa></pci-isa></ehci></ahci></ahci></amd></xhci></encrypt></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></acpi></acpi></power></high></at></at></acpi></acpi></acpi></acpi></core></software></version></version></software,></core ></xsaveopt></bmi1></lahf,cmp,svm,extapic,cr8,abm,sse4a,mas,prefetch,osvw,ibs,skinit,wdt,topology,pnxc,dbe,ptsc,pl2i></syscall,nx,mmx+,ffxsr,page1gb,rdtscp,lm></sse3,pclmulqdq,mon,ssse3,cx16,sse4.1,sse4.2,movbe,popcnt,aesni,xsave,osxsave,avx,f16c></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,htt>
        1 Reply Last reply Reply Quote 0
        • H
          hda
          last edited by

          @z3us:

          I'm receiving:
          kldload: an error occurred while loading the module. Please check dmesg(8) for more details.

          Followed every step as described.
          Using pfSense 2.3.2-RELEASE-p1

          Any ideas?

          It works with APU2 just only starting from pfSense 2.4 / FreeBSD-11 ;)

          1 Reply Last reply Reply Quote 0
          • Z
            z3us
            last edited by

            @hda:

            @z3us:

            I'm receiving:
            kldload: an error occurred while loading the module. Please check dmesg(8) for more details.

            Followed every step as described.
            Using pfSense 2.3.2-RELEASE-p1

            Any ideas?

            It works with APU2 just only starting from pfSense 2.4 / FreeBSD-11 ;)

            Thanks for your answer, but damn.
            I thought I was already on the latest version… where can I find the 2.4 ISO?

            1 Reply Last reply Reply Quote 0
            • F
              Fahrenhe1t
              last edited by

              It's in beta at: https://snapshots.pfsense.org/

              1 Reply Last reply Reply Quote 0
              • Z
                z3us
                last edited by

                @Fahrenhe1t:

                It's in beta at: https://snapshots.pfsense.org/

                Thanks!
                I'm running some units in production environment, so will be testing this release in my testlab and wait for stable release for my production environment.

                1 Reply Last reply Reply Quote 0
                • F
                  Fahrenhe1t
                  last edited by

                  Seems strange though, people confirmed in another thread that the 10.3 amdtemp.ko worked on your chip (https://forum.pfsense.org/index.php?topic=106444.msg631137#msg631137)…

                  1 Reply Last reply Reply Quote 0
                  • M
                    markn62
                    last edited by

                    Suddenly out of the blue I notice now the temps are correct in the GUI. No firmware upgrade since last post. No idea how it started working. Added some 1:1's, a few rules, bout it since. Odd…

                    1 Reply Last reply Reply Quote 0
                    • M
                      markn62
                      last edited by

                      Come to find out the A6-7470K did fix the problem. I wasn't told it got dropped in the router box.

                      @markn62:

                      Thats a good idea but then I still have a broken temperature status. Your right the cpu is a bit old. I think I'll cut my time losses and try an A6-7470K. If it works I'll keep the 5400 as a back up.

                      1 Reply Last reply Reply Quote 0
                      • K
                        kevindd992002
                        last edited by

                        @Fahrenhe1t

                        Do you really have to place amdtemp.ko in /boot/modules as well? I don't see any amtemp.ko file there by default.

                        1 Reply Last reply Reply Quote 0
                        • A
                          AfTaStEr
                          last edited by

                          is there anyway to see the temp readings on a AMD Sempron 2200+ cpu? AMD K7

                          1 Reply Last reply Reply Quote 0
                          • U
                            unnes
                            last edited by

                            @Fahrenhe1t:

                            Hey, I found a thread which has updated DEVICEID's (http://www.pcengines.info/forums/?page=post&id=795B2ACC-F4B0-4181-9B4A-54EC757D4001&fid=DF5ACB70-99C4-4C61-AFA6-4C0E0DB05B2A).  The guy (Stephan) said he compiled the latest version and uploaded it here: http://s000.tinyupload.com/index.php?file_id=70328254396185987242

                            Maybe you can try that one?

                            Thanks, this version of amdtemp.ko worked for me on 2.3.4-DEVELOPMENT (amd64)! Now I can see just how ridiculously hot my new fanless router is getting…  ;)

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.