2 gateways with the same wan
-
I'm sorry but your network diagram is even more confusing to me. Why do you have 4 routers and 4 PCs? What are all these things connected to?
-
-
Tell me about it. It's starting to make my head hurt.
-
@KOM:
Tell me about it. It's starting to make my head hurt.
is the same pfsense with 4 different configurations, and the pc with the result of that configurations
-
WTF does upstream gateway 2, routing gateway 1 mean???
Its gibberish…
When they asked you to draw, they meant how your connected to what gateway 1 and gateway 2 is..
-
WTF does upstream gateway 2, routing gateway 1 mean???
Its gibberish…
When they asked you to draw, they meant how your connected to what gateway 1 and gateway 2 is..
my ISP provide me 2 gateways, in my pfsense I have 2 network cards (WAN and LAN), I have the 2 gateways configured in pfsense, my diagram only show what happen with that 4 configurations (exchanging the gateways between upstream default and routing gate way), I only have one pc in the pfsense LAN for see the results
-
And what is the point of giving you 2 gateways on the same connection?
-
And what is the point of giving you 2 gateways on the same connection?
I explain it, in the third post
-
that doesn't explain the POINT of it.. You only have 1 connection??? If the connection is down then both gateways would not be reachable!! So does their gateway 1 go down while you still have a connection?? WTF???
And while on this second gateway you only get 3mbps from a 100mbps connection.. that is not really a failover or backup ;)
So they gave you this 2nd gateway and said use this is a backup? Because our primary router goes down??
I see zero point to this sort of setup.. Point to the gateway that gives you 100mbps and call it a day.. If your internet goes down - try changing over to the other.. Does that work?? If so call the the ISP and say WTF!!!
-
1. You are Wrong, I Dont know how is the ISP configuration but sometimes the 100mbps is down, then I can change the most important pc to another network (only changing the gateway)
2. I dont want failover, I know 3mbps is not enough for a network, is only for a few machines
3. Yes
4. Yes that Work, my ISP provide me from a fortinet, I cant see anything of that configuration and obvious I cant change anything of that
Then you can help me, with the configuration that I want?
-
I should have purchased more popcorn…
1. You are Wrong, I Dont know how is the ISP configuration but sometimes the 100mbps is down, then I can change the most important pc to another network (only changing the gateway)
Wonderful. So, perhaps the ISP could implement a failover on their own infrastructure, instead of suggesting their customers to configure similar WTFs?!
-
I don't think what you are trying to do is possible without another NIC, and at this point I am stepping back.
-
Well you could create 2 VLANs on your WAN and keep on messing with this nonsense, but I'd rather switch ISPs.
-
I ask to my ISP about how exactly work my service, I will try explain you MY isp have 2 contracts, with 2 companies (one 100mbps, another 3mbps), then they have connected the 2 services to a fortinet, then they make my subnet 192.168.17.xx that subnet have 2 gateways (100mbps and 3bmps) then I can use any of that services, only changing the gateways
-
have 2 contracts, with 2 companies (one 100mbps, another 3mbps), then they have connected the 2 services to a fortinet
Good that we know now, after two days of asking you to produce a network scheme. ::) ::) ::) Once you've asked both ISPs about how each of their services should be configured, got rid of the Fortinet and plugged both to pfSense box, you might even get a working pfSense multi-WAN setup.
-
have 2 contracts, with 2 companies (one 100mbps, another 3mbps), then they have connected the 2 services to a fortinet
Good that we know now, after two days of asking you to produce a network scheme. ::) ::) ::) Once you've asked both ISPs about how each of their services should be configured, got rid of the Fortinet and plugged both to pfSense box, you might even get a working pfSense multi-WAN setup.
I cant change anything in the fortinet, they only gave me one ethernet wire with the service, I do not even know where the fortinet is physically
-
-
So your connection comes in from a fortinet.. And this fortinet has 2 different connections.. Why would the fortinet not be set to use this 2nd connection if 1st fails?
That is how any sane person would set it up.. Expecting the customer to use 2 different gateways on the same network is moronic…
Good luck...
-
So your connection comes in from a fortinet.. And this fortinet has 2 different connections.. Why would the fortinet not be set to use this 2nd connection if 1st fails?
That is how any sane person would set it up.. Expecting the customer to use 2 different gateways on the same network is moronic…
Good luck...
Because 3mbps is not enough for a network, but ok, I'm going to a corner to cry jeje
-
how are you suppose to know the 1st connection went down?? You would not loose an interface, etc. So how do you cut over automatically? you would have to setup some monitor to some outside IP..
Their fortinet interface most likely would go down if the ISP goes down for that connection, etc.
No shit 3mbps is not enough.. but as a failover/backup its better than ZERO.. But if they are bringing these into a fortinet, and then just handing you 1 connection, why should you as the customer have to figure out when to fail over? If it was your fortinet ok, but your saying its this companies… So they should figure out the failover and hand you your 1 connection that you use..
