Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    A Question on Network Cards, and my choice of hardware….

    Scheduled Pinned Locked Moved Hardware
    25 Posts 4 Posters 5.5k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • P
      pfBasic Banned
      last edited by

      Yeah those are great boards, I have one for an HTPC and have tested it out on pfSense with great results.

      If you'd rather buy RAM than have a larger board then I think it would be great for you.

      For your needs, with an i340 you could even virtualize it with ESXi and run pfSense and an HTPC on any of the Apollo Lake boards!  ;)

      1 Reply Last reply Reply Quote 0
      • V
        vimes
        last edited by

        Although it would be "down the road" the virtualization was something that I knew a i340 could offer me.
        Whilst we do enjoy our Odroid  C2 for our media needs I can appreciate what virtualization could offer with that ITX board and i340.

        Thanks yet again.

        1 Reply Last reply Reply Quote 0
        • V
          vimes
          last edited by

          ASRock J3355B-ITX 2DDR3(SOD)/2S3/GL M-ITX Motherboard.

          Thermaltake Core V1 Mini ITX Cube Case

          Crucial 8 GB Kit (4 GB x 2) DDR3L 1866 MT/s (PC3L-12800) SODIMM 204-Pin Memory

          Ordered

          Thanks again

          1 Reply Last reply Reply Quote 0
          • P
            pfBasic Banned
            last edited by

            Congratulations, please let us know how it works out for you and ask any questions you may have about configuration!

            1 Reply Last reply Reply Quote 0
            • V
              vimes
              last edited by

              My hardware arrived and with what I had already the build includes….

              ITX cube case, didn't use the case fan.
              ASRock J3455M Apollo Lake 2xD3/2xS3/G M-ATX
              8GB SO-DIMM memory, way too much I know.
              Old SSD drive
              Be-Quiet 80+ Gold 500w PSU, from an old build.
              i340 T2 Intel dual port LAN card from eBay.

              It took me a while to figure out that pfsense would not boot from the USB drive as the BIOS is in UEFI mode and so compatibility mode needs to be enabled. You would not believe how many times I created several sticks to find that one out...!

              Install was uneventful, in other words it worked....! All connected now with my PPPoE connection and DHCP enabled for the LAN.

              My R7000 is now in AP mode for wireless.

              The box is very very quiet. I can't even hear a PSU fan, if it is running. As there are no other fans it should be as near silent as possible. It is in a well ventilated area.

              My next major challenge will be.....

              https://airvpn.org/topic/17444-how-to-set-up-pfsense-23-for-airvpn/#entry40138

              how to set up pfsense to use as a client for my AirVPN connection.

              I have read the above guide and I'm a little overwhelmed at the moment....!

              As yet I'm continuing to use their desktop client for just my PC to use the VPN connection, hopefully that might improve one day...!

              1 Reply Last reply Reply Quote 0
              • P
                pfBasic Banned
                last edited by

                Just keep asking questions here! The forum is here to mitigate feeling of being overwhelmed. I can't help with specifically AirVPN, but I'm sure others can!

                1 Reply Last reply Reply Quote 0
                • V
                  vimes
                  last edited by

                  Thanks :)

                  As you have one of those motherboards, I have asked this in the Asrock forums but not got a response as yet….

                  Before installing pfsense I decided to let it boot to the SSD I had fitted, it happened to have a Windows 10 x64 build installed. All went well.

                  This allowed me to test the board out beyond what I would otherwise know by using pfsense.

                  What I noticed was if I used CPU-Z and CPU-Temp I could stress the CPU load to 100% and this would raise the CPU frequency to 2400mhz, 24x100.

                  But as this CPU is rated by Asrock to be 2500mhz I assumed I would have seen 25x100 to  equate that maximum speed...?

                  Have you noticed this...?

                  Thanks

                  1 Reply Last reply Reply Quote 0
                  • P
                    pfBasic Banned
                    last edited by

                    @vimes:

                    My hardware arrived and with what I had already the build includes….

                    ASRock J3455M Apollo Lake 2xD3/2xS3/G M-ATX

                    @vimes:

                    this CPU is rated by Asrock to be 2500mhz

                    IDK if ASRock mistyped something somewhere but Intel is the place to go for CPU specs,

                    • J3455 is 1.5GHz burst to 2.3GHz

                    • J3355 is 2.0GHz burst to 2.5GHz

                    Did you get a J3355?

                    Either way, when you're speccing out your system use the base frequency to evaluate the kind of performance you can get.
                    Burst frequency will only happen when the conditions are right and only for a short period.
                    If you keep your computer in a hot room you might never see much of any bursting happening because the CPU doesn't have the thermal overhead for it.
                    If you were to keep the computer in an ice cold room or use excellent cooling on it you would see it hitting its full burst frequency a lot because it would have so much thermal overhead.

                    1 Reply Last reply Reply Quote 0
                    • V
                      vimes
                      last edited by

                      @pfBasic:

                      @vimes:

                      My hardware arrived and with what I had already the build includes….

                      ASRock J3455M Apollo Lake 2xD3/2xS3/G M-ATX

                      @vimes:

                      this CPU is rated by Asrock to be 2500mhz

                      IDK if ASRock mistyped something somewhere but Intel is the place to go for CPU specs,

                      • J3455 is 1.5GHz burst to 2.3GHz

                      • J3355 is 2.0GHz burst to 2.5GHz

                      Did you get a J3355?

                      Either way, when you're speccing out your system use the base frequency to evaluate the kind of performance you can get.
                      Burst frequency will only happen when the conditions are right and only for a short period.
                      If you keep your computer in a hot room you might never see much of any bursting happening because the CPU doesn't have the thermal overhead for it.
                      If you were to keep the computer in an ice cold room or use excellent cooling on it you would see it hitting its full burst frequency a lot because it would have so much thermal overhead.

                      sorry I did not explain it well enough….

                      I did get the J335 and it is noted as 2Ghz but its burst rate should be up to 2.5Ghz, as you also noted :)

                      But when I stressed it I then find it will show as 2.4Ghz and CPU-Temp will show it as 100x24.

                      This should show as 2.5Ghz and 25x100 if it was to meet the spec of 2.5Ghz. The CPU was cool and not being throttled at the time due to heat.

                      1 Reply Last reply Reply Quote 0
                      • P
                        pfBasic Banned
                        last edited by

                        Yeah I don't know why it wouldn't hit the top burst frequency.

                        There is probably a whole set of criteria for how Intel handles turbo boost and I don't know what it is.
                        It also might be a windows thing? I really don't know.

                        1 Reply Last reply Reply Quote 0
                        • V
                          vimes
                          last edited by

                          @pfBasic:

                          Yeah I don't know why it wouldn't hit the top burst frequency.

                          There is probably a whole set of criteria for how Intel handles turbo boost and I don't know what it is.
                          It also might be a windows thing? I really don't know.

                          No worries and many thanks

                          The point that CPU-Temp was able to show the multiplier at 24 and thus only 2.4Ghz is something set by Asrock, there is no manual override with this board for the clock frequency. I'm hoping that they will come back to me on that one within their forums and I've also contacted an Asrock rep.

                          If I get a reply from either I'll post back here

                          As a side note my AirVPN connection is now up and going.

                          But somewhere I'll have to figure out why the firewall within pfsense is blocking my Usenet clients from connecting on ports 119 and ports 563.

                          1 Reply Last reply Reply Quote 0
                          • W
                            whosmatt
                            last edited by

                            @vimes:

                            I did get the J335 and it is noted as 2Ghz but its burst rate should be up to 2.5Ghz, as you also noted :)

                            But when I stressed it I then find it will show as 2.4Ghz and CPU-Temp will show it as 100x24.

                            This should show as 2.5Ghz and 25x100 if it was to meet the spec of 2.5Ghz. The CPU was cool and not being throttled at the time due to heat.

                            Did you stress it with a single thread or multiple?  It's my understanding that the max boost speed would only apply if a single core is stressed, and then only if power and thermal limits allow it.  If it's boosting to 2.4GHz on all cores then I'd say you're doing pretty well.

                            1 Reply Last reply Reply Quote 0
                            • V
                              vimes
                              last edited by

                              Point taken about the cores.

                              Considering that I have managed to get pfsense working now with my VPN connection and at around 75Mb the CPU is showing around 20% load all seems good.

                              Just to satisfy my curiosity it would be interesting what Asrock will have to say. I still suspect that it is the BIOS limiting the CPU to a 24x multiplier. Which could be for thermal reasons due to the passive cooler fitted.

                              1 Reply Last reply Reply Quote 0
                              • R
                                Runenaldo
                                last edited by

                                my Asrock J3455-ITX is doing the same as your J3355, during multicore stress testing in prime95.

                                it should hit 2.3GHz, but I'm only seeing 2.2GHz (multiplier x22)

                                1 Reply Last reply Reply Quote 0
                                • V
                                  vimes
                                  last edited by

                                  That's interesting. I wonder if it is a Asrock / BIOS means of thermal or stability control as I would doubt that it would be an Intel limitation.
                                  Asus also use some of these chips in similar boards but I haven't read about their limitations.

                                  They have not replied here….

                                  http://forum.asrock.com/forum_posts.asp?TID=4787

                                  ... When I asked that question.

                                  I do feel kinda cheated...!  Lol

                                  1 Reply Last reply Reply Quote 0
                                  • P
                                    pfBasic Banned
                                    last edited by

                                    It probably has something to do with what whosmatt mentioned. I very much doubt that a huge supplier (or any supplier) like ASRock is crippling hardware secretly.

                                    This is probably just not the right way to test that.

                                    1 Reply Last reply Reply Quote 0
                                    • P
                                      pfBasic Banned
                                      last edited by

                                      It looks like a moderator did answer you over there:

                                      If we check the specifications of your board's J3355 processor, we find that 2.5GHz is what Intel calls the "Burst Frequency".

                                      http://www.intel.com/content/www/us/en/products/processors/celeron/j3355.html

                                      Burst Frequency is similar to a Turbo speed of other Intel processors. The Turbo and Burst frequency/speed is not the maximum standard processor speed. Turbo speeds occur only on a subset of the processor cores under certain conditions and situations. The same is true for the Burst Frequency. Turbo and Burst speeds are not maintained on a continuous basis.

                                      When stress testing an Intel processor with the Turbo feature, the maximum speed all the cores will achieve will be the maximum specified frequency, which is not the Turbo frequency. The same is true for the Burst frequency.

                                      In the case of the J3455-ITX board, and its J3455 processor, the Burst Frequency is 2.3GHz:

                                      http://ark.intel.com/products/95594/Intel-Celeron-Processor-J3455-2M-Cache-up-to-2_3-GHz

                                      So this one is on Intel, or a slight misunderstanding of the specifications of these processors.

                                      Similar response to what you got over here.

                                      Especially since two people are seeing the same result on different CPUs, almost certainly either a misunderstanding of the technology, an error in testing method or both.
                                      Highly unlikely (read, it isn't) a secret nerf from Intel or ASRock.

                                      Burst does not = Turbo Boost, but there isn't any clear paper explaining it by Intel (that I've found).
                                      https://www.pcper.com/reviews/Processors/Intel-Atom-Z3000-Series-Review-Bay-Trail-and-Silvermont-Arrive/Intel-Burst-and-Ac

                                      1 Reply Last reply Reply Quote 0
                                      • V
                                        vimes
                                        last edited by

                                        I think that it is more of how the board was advertised at Amazon which, for me, started the confusion….

                                        ASRock J3355B-ITX J3355 2DDR3(SOD)/2S3/GL M-ITX ASRock Super Alloy Intel Dual-Core Processor J3355 (up to 2.5 GHz)

                                        And in the motherboard spec at Amazon......

                                        Processor Speed 2.5 GHz

                                        Which should be amended.

                                        ASRock J3355B-ITX 2DDR3(SOD)/2S3/GL M-ITX Motherboard - Grey

                                        https://www.amazon.co.uk/dp/B01M9EXCYB/ref=cm_sw_r_cp_apa_0556ybD5VSKG1

                                        At least we know.

                                        1 Reply Last reply Reply Quote 0
                                        • P
                                          pfBasic Banned
                                          last edited by

                                          Oh yeah, those damn advertisements will get you!

                                          When speccing your hardware it's always best to read the manufacturers spec (in this case Intel ARK).

                                          When determining the CPU you need it's best to figure out about the minimum single core clock frequency you can get away with to do what you need, and buy something that meets (or very nearly meets) that as a base frequency. Turbo Boost and Burst frequencies can't be relied on to give you performance because of the way they are designed. Think of them as a bonus you'll get every now and then and you won't be disappointed.

                                          1 Reply Last reply Reply Quote 0
                                          • V
                                            vimes
                                            last edited by

                                            How I do agree.!

                                            I did check out the CPU with Intel to understand the TDP and then read….

                                            Processor Base Frequency
                                            2.00 GHz

                                            Burst Frequency
                                            2.50 GHz

                                            What I didn't understand is how the burst mode values are arrived that. Sort of different to how my 6700k is listed.

                                            It was important to know if the CPU supported the AES instruction set and, if needed, virtualization.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.